Get started
Author

Derviş Özkan

Observed names: D. Ozkan, Dervis OZKAN, Dervis Ozkan, Dervis Özkan, Derviş ÖZKAN, Derviş, Özkan
Institution: Bartin University
ORCID: 0000-0002-4978-290X
Observed ORCID: 0000-0002-4978-290X
OpenAlex ID: A5031900318
Carbon Fiber Reinforced Polymer (CFRP) Composite Materials, Their Characteristic Properties, Industrial Application Areas and Their Machinability
2020 · Dervis Ozkan, Mustafa Sabri Gok, et al. · Advanced structured materials · 140
Investigation of vermiculite infiltration effect on microstructural properties of thermal barrier coatings (TBCs) produced by electron beam physical vapor deposition method (EB-PVD)
2022 · Okan Odabas, Yasin Ozgurluk, et al. · Surface and Coatings Technology · 92
Structural characteristics and wear, oxidation, hot corrosion behaviors of HVOF sprayed Cr3C2-NiCr hardmetal coatings
2023 · Dervis Ozkan · Surface and Coatings Technology · 82
An Overview of Utilization of Blast Furnace and Steelmaking Slag in Various Applications
2019 · Mecit Oge, Dervis Ozkan, et al. · Materials Today Proceedings · 75
Analysis of Surface Roughness and Flank Wear Using the Taguchi Method in Milling of NiTi Shape Memory Alloy with Uncoated Tools
2020 · Emre Altas, Hasan Gokkaya, et al. · Coatings · 74
PDF
Cyclic Hot Corrosion Failure Behaviors of EB-PVD TBC Systems in the Presence of Sulfate and Vanadate Molten Salts
2019 · Yasin Ozgurluk, Kadir Mert Doleker, et al. · Coatings · 69
PDF
Optimization of Cutting Conditions, Parameters, and Cryogenic Heat Treatment for Surface Roughness in Milling of NiTi Shape Memory Alloy
2022 · Emre Altas, Omer Erkan, et al. · Journal of Materials Engineering and Performance · 58
Evaluation of AlCoCrFeNiTi-high entropy alloy (HEA) as top coat material in thermal barrier coating (TBC) system and investigation of its high temperature oxidation behavior
2024 · Okan Odabas, Abdullah Cahit Karaoglanli, et al. · Surface and Coatings Technology · 55
Milling Behavior Analysis of Carbon Fiber-Reinforced Polymer (CFRP) Composites
2019 · Dervis Ozkan, Mustafa Sabri Gok, et al. · Materials Today Proceedings · 48
Structural characteristics, oxidation performance and failure mechanism of thermal barrier coatings fabricated by atmospheric plasma spraying and detonation gun spraying
2023 · Yasin Ozgurluk, Ahmet Gulec, et al. · Engineering Failure Analysis · 43
Oxidation Behavior of NiCr/YSZ Thermal Barrier Coatings (TBCs)
2018 · Kadir Mert Doleker, Yasin Ozgurluk, et al. · Open Chemistry · 40
Effect of coating degradation on the hot corrosion behavior of yttria-stabilized zirconia (YSZ) and blast furnace slag (BFS) coatings
2023 · Abdullah Cahit Karaoglanli, Yasin Ozgurluk, et al. · Surface and Coatings Technology · 32
The Microstructural Investigation of Vermiculite-Infiltrated Electron Beam Physical Vapor Deposition Thermal Barrier Coatings
2018 · Yasin Ozgurluk, Kadir Mert Doleker, et al. · Open Chemistry · 32
PDF
Experimental Study on Tool Wear and Delamination in Milling CFRPs with TiAlN- and TiN-Coated Tools
2020 · Dervis Ozkan, Peter Panjan, et al. · Coatings · 31
PDF
Comparison of microstructures and oxidation behaviors of ytria and magnesia stabilized zirconia thermal barrier coatings (TBC)
2018 · K. M. Doleker, Y. Ozgurluk, et al. · Materiali in tehnologije · 30
Effect of Cr Addition on Properties and Tribological Behavior at Elevated Temperature of Boride Layers Grown on Borosintered Powder Metallurgy Alloys
2022 · Ali Günen, Ömer Saltuk Bölükbaşı, et al. · Metals and Materials International · 27
Room- and high temperature Wear Resistance of MCrAlY Coatings Deposited by Detonation Gun (D-gun) and Supersonic Plasma Spraying (SSPS) Techniques
2020 · Mehmet Kilic, Dervis Ozkan, et al. · Coatings · 26
PDF
Investigation of machining parameters that affects surface roughness and cutting forces in milling of CFRPs with TiAlN and TiN coated carbide cutting tools
2019 · Dervis Ozkan, Peter Panjan, et al. · Materials Research Express · 23
Formation and Growth Behaviour of Thermally Grown Oxide Layer in Thermal Barrier Coatings with HVOF Sprayed Nickel-Chromium Bond Coats
2020 · Abdullah Selim Parlakyigit, Dervis Ozkan, et al. · Emerging Materials Research · 15
Comparison of Wear Behavior of Basic Oxygen Furnace Slag and WC-CoCr Coating
2024 · Dervis Ozkan, Ahmet Gulec, et al. · Journal of Materials Engineering and Performance · 12
PDF
The Effects of Cutting Parameters on Tool Wear During the Milling of CFRP Composites
2019 · Dervis OZKAN, Mustafa Sabri GOK, et al. · Materials Science · 10
PDF
Characterization and Tribology Performance of Refractory Materials Coatings with Blast Furnace Slag (BFS) Fabricated by Thermal Spraying
2024 · Dervis Ozkan, Gulfem Binal, et al. · JOM · 8
Machining effects on delamination failure in milling MD-CFRPs with uncoated carbide tools
2019 · Dervis Ozkan, Mustafa Sabri Gok, et al. · Emerging Materials Research · 7
The Effect of Cutting Parameters on Tool Wear During the Milling of Carbon Fiber Reinforced Polymer (CFRP) Composites
2019 · Dervis OZKAN, Mustafa Sabri GOK, et al. · Materials Science · 7
Yüksek Entropili Alaşımlar: üretimi, özellikleri ve kullanım alanları
2020 · Derviş ÖZKAN, Cahit KARAOĞLANLI · El-Cezeri Fen ve Mühendislik Dergisi · 6
PDF
Works count: 41
Citation count: 1,079
H-index: 18
I10-index: 21
Year
Topic
Type