Get started
Author

Joseph Absi

Simulation of the effect of material properties and interface roughness on the stress distribution in thermal barrier coatings using finite element method
2009 · M. Ranjbar-Far, J. Absi, et al. · Materials & Design (1980-2015) · 273
Thermal conductivity of highly porous zirconia
2006 · B. Nait-Ali, K. Haberko, et al. · Journal of the European Ceramic Society · 266
Controlling the reactivity of silicate solutions: A FTIR, Raman and NMR study
2016 · L. Vidal, E. Joussein, et al. · Colloids and Surfaces A Physicochemical and Engineering Aspects · 129
Crack propagation modeling on the interfaces of thermal barrier coating system with different thickness of the oxide layer and different interface morphologies
2011 · M. Ranjbar-far, J. Absi, et al. · Materials & Design (1980-2015) · 114
Impact of the non-homogenous temperature distribution and the coatings process modeling on the thermal barrier coatings system
2010 · M. Ranjbar-Far, J. Absi, et al. · Materials & Design (1980-2015) · 112
Potassium geopolymer foams made with silica fume pore forming agent for thermal insulation
2012 · Joseph Henon, Arnaud Alzina, et al. · Journal of Porous Materials · 100
Finite Element Modeling of the Different Failure Mechanisms of a Plasma Sprayed Thermal Barrier Coatings System
2012 · M. Ranjbar-Far, J. Absi, et al. · Journal of Thermal Spray Technology · 94
Analysis of Aerodynamic Journal Bearings With Small Number of Herringbone Grooves by Finite Element Method
1994 · D. Bonneau, J. Absi · Journal of Tribology · 89
State-of-the-Art Review on Permanent Deformation Characterization of Asphalt Concrete Pavements
2023 · Rouba Joumblat, Zaher Al Basiouni Al Masri, et al. · Sustainability · 77
PDF
Heterogeneous numerical modeling of asphalt concrete through use of a biphasic approach: Porous matrix/inclusions
2013 · F. Fakhari Tehrani, J. Absi, et al. · Computational Materials Science · 72
Effect of Residual Stresses and Prediction of Possible Failure Mechanisms on Thermal Barrier Coating System by Finite Element Method
2010 · M. Ranjbar-Far, J. Absi, et al. · Journal of Thermal Spray Technology · 63
Porosity control of cold consolidated geomaterial foam: Temperature effect
2011 · Joseph Henon, Arnaud Alzina, et al. · Ceramics International · 61
Preparation and thermal conductivity characterisation of highly porous ceramics
2006 · B. Nait-Ali, K. Haberko, et al. · Journal of the European Ceramic Society · 55
Mixed mode fracture properties characterization for wood by Digital Images Correlation and Finite Element Method coupling
2013 · M. Méité, F. Dubois, et al. · Engineering Fracture Mechanics · 53
Thermal conductivity of pressed powder compacts: tin oxide and alumina
2006 · C. Poulier, D.S. Smith, et al. · Journal of the European Ceramic Society · 53
Numerical calculations of the thermal conductivity of porous ceramics based on micrographs
2005 · S. Grandjean, J. Absi, et al. · Journal of the European Ceramic Society · 53
Identification algorithm for fracture parameters by combining DIC and FEM approaches
2011 · Octavian Pop, Mamadou Meite, et al. · International Journal of Fracture · 49
Improved method for severe thermal shocks testing of ceramics by water quenching
2003 · J. Absi, J.C. Glandus · Journal of the European Ceramic Society · 43
Grain-boundary thermal resistance in polycrystalline oxides: alumina, tin oxide, and magnesia
2003 · David Smith, Sylvie Grandjean, et al. · High Temperatures-High Pressures · 42
Characterization of mixed-mode fracture based on a complementary analysis by means of full-field optical and finite element approaches
2012 · Mamadou Méité, Octavian Pop, et al. · International Journal of Fracture · 38
Investigation into the impact of the use of 2D/3D digital models on the numerical calculation of the bituminous composites’ complex modulus
2013 · F. Fakhari Tehrani, J. Absi, et al. · Computational Materials Science · 35
Characterization of timber fracture using the Digital Image Correlation technique and Finite Element Method
2012 · F. Dubois, M. Méité, et al. · Engineering Fracture Mechanics · 35
Mechanical Behavior of Polymer-Modified Bituminous Mastics. I: Experimental Approach
2018 · Pouria Hajikarimi, Fateh Fakhari Tehrani, et al. · Journal of Materials in Civil Engineering · 34
Fractional viscoelastic modeling of modified asphalt mastics using response surface method
2021 · Pouria Hajikarimi, Mehrdad Ehsani, et al. · Construction and Building Materials · 31
Determination of the polymerization degree of various alkaline solutions: Raman investigation
2017 · L. Vidal, A. Gharzouni, et al. · Journal of Sol-Gel Science and Technology · 30
Works count: 167
Citation count: 2,953
H-index: 27
I10-index: 70
Year
Topic
Type