Author

M.P. Jenarthanan

Observed names: Jenarthanan M P, Jenarthanan M. P, Jenarthanan M.P., Jenarthanan MP, Jenarthanan Mugundhu, Jenarthanan Mugundhu Poornachari, Jenarthanan Poornachary Mugundhu, M P Jenarthanan, M. P Jenarthanan, M. P. Jenarthanan, M.P Jenarthanan, MP Jenarthanan, Mugundu Poornachary Jenarthanan

Institution: SASTRA University

Observed institutions: National Institute of Technology Tiruchirappalli, SASTRA University

ORCID: 0000-0002-5561-5585

Observed ORCID: 0000-0002-5561-5585

OpenAlex ID: A5032005902

Optimisation of machining parameters on milling of GFRP composites by desirability function analysis using Taguchi method

2018 · M.P. Jenarthanan, R Jeyapaul · International Journal of Engineering Science and Technology · 84

PDF

Investigation on effect of process parameters on delamination during drilling of kenaf‐banana fiber reinforced in epoxy hybrid composite using Taguchi method

2019 · Giridharan Rajaraman, Santosh Kumar Agasti, et al. · Polymer Composites · 41

Optimizing the powder mixed EDM process of nickel based super alloy

2021 · S Ramesh, MP Jenarthanan · Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering · 38

Analysis of leaf spring using Carbon / Glass Epoxy and EN45 using ANSYS: A comparison

2018 · M.P. Jenarthanan, S. Ramesh Kumar, et al. · Materials Today Proceedings · 34

Machinability study of carbon fibre reinforced polymer (CFRP) composites using design of experiment technique

2013 · M.P. Jenarthanan, R. Jeyapaul · Pigment & Resin Technology · 32

A Review on Glass fibre Reinforced Composites with Different Matrix

2021 · Chaitanya Gadde Mehar, M P Jenarthanan, et al. · REST Journal on Emerging trends in Modelling and Manufacturing · 29

PDF

Analysis of factors influencing tensile strength in dissimilar welds of AA2024 and AA6061 produced by Friction Stir Welding (FSW)

2016 · K. Jagathesh, M.P. Jenarthanan, et al. · Australian Journal of Mechanical Engineering · 27

Experimental investigation of powder-mixed electric discharge machining of AISI P20 steel using different powders and tool materials

2018 · Ramesh S., M.P. Jenarthanan, et al. · Multidiscipline Modeling in Materials and Structures · 25

Impact of friction stir welding (FSW) process parameters on tensile strength during dissimilar welds of AA2014 and AA6061

2018 · M.P. Jenarthanan, C. Varun Varma, et al. · Materials Today Proceedings · 24

Experimental investigation and analysis of factors influencing delamination and thrust force during drilling of carbon-fibre reinforced polymer composites

2017 · Rajkumar D, Ranjithkumar P, et al. · Pigment & Resin Technology · 23

Investigation of Powder Mixed EDM of Nickel-Based Superalloy Using Cobalt, Zinc and Molybdenum Powders

2021 · S. Ramesh, M. P. Jenarthanan · Transactions of the Indian Institute of Metals · 21

Free vibration analysis of a composite reinforced with natural fibers employing finite element and experimental techniques

2018 · Thomas P, Jenarthanan MP, et al. · Journal of Natural Fibers · 21

Modelling of machining force in end milling of GFRP composites using MRA and ANN

2015 · M. P. Jenarthanan, S. Ramesh Kumar, et al. · Australian Journal of Mechanical Engineering · 18

Experimental study on effect of fiber length and fiber content on tensile and flexural properties of bamboo fiber/epoxy composite

2019 · Giridharan R., Raatan V.S., et al. · Multidiscipline Modeling in Materials and Structures · 17

Investigation on Crash Analysis of a Frontal Car Bumper

2019 · M. Karthikeyan, M. P. Jenarthanan, et al. · Transactions of the Indian Institute of Metals · 17

Preparation and characterisation of glass and cotton fibers reinforced epoxy hybrid composites

2019 · Giridharan R., Jenarthanan M.P. · Pigment & Resin Technology · 17

Multi-response optimization for machining GFRP composites using GRA and DFA

2018 · Naresh Neeli, M.P. Jenarthanan, et al. · Multidiscipline Modeling in Materials and Structures · 17

Analysis of factors influencing delamination in milling process of glass fibre reinforced plastic (GFRP) composite materials

2013 · Jenarthanan Mugundhu, R. Jeyapaul, et al. · Multidiscipline Modeling in Materials and Structures · 17

Evaluation of mechanical properties of e-glass and aloe vera fiber reinforced with polyester and epoxy resin matrices

2019 · Jenarthanan M.P., Karthikeyan Marappan, et al. · Pigment & Resin Technology · 16

Evaluation and Optimization of Surface Roughness and Metal Removal Rate Through RSM, GRA, and TOPSIS Techniques in Turning PTFE Polymers

2019 · N. Sathiya Narayanan, N. Baskar, et al. · Lecture notes in mechanical engineering · 14

Grey-fuzzy logic to optimise process parameters in drilling of glass fibre reinforced stainless steel mesh polymer composite

2017 · M. Sakthivel, S. Vijayakumar, et al. · Pigment & Resin Technology · 14

Mechanical, Morphological and Water absorption properties of Polypropylene based Composites

2022 · M P Jenarthanan, N G Ramkhi, et al. · 13

PDF

Evaluation of machinability index on milling of GFRP Composites with different fibre orientations using solid carbide endmill with modified helix angles

2014 · MP Jenarthanan, R Jeyapaul · International Journal of Engineering Science and Technology · 12

Modelling and analysis of factors influencing surface roughness and delamination of milling of GFRP laminates using RSM

2012 · M.P. Jenarthanan, R. Jeyapaul, et al. · Multidiscipline Modeling in Materials and Structures · 12

Investigating the performance of powder mixed electric discharge machining of Nimonic 75 by using different tool materials

2018 · Ramesh S., Jenarthanan M.P. · World Journal of Engineering · 11

Works count: 80

Citation count: 773

H-index: 17

I10-index: 28