Get started
Author

Mohamed Guessasma

Observed names: Guessasma Mohamed, Guessasma, M, Guessasma, M., Guessasma, Mohamed, Guessasma, Mohammed, M Guessasma, M. Guessasma, Mohammed Guessasma
ORCID: 0000-0002-2870-5657
Observed ORCID: 0000-0002-2870-5657
OpenAlex ID: A5032539857
On the definition of the stress tensor in granular media
2013 · François Nicot, Nejib Hadda, et al. · International Journal of Solids and Structures · 127
PDF
Discrete modeling of granular flow with thermal transfer: Application to the discharge of silos
2008 · V.D. Nguyen, C. Cogné, et al. · Applied Thermal Engineering · 76
On the suitability of a Discrete Element Method to simulate cracks initiation and propagation in heterogeneous media
2016 · W. Leclerc, H. Haddad, et al. · International Journal of Solids and Structures · 66
Heat transfer by conduction using DEM–FEM coupling method
2013 · H. Haddad, M. Guessasma, et al. · Computational Materials Science · 53
A DEM–FEM coupling based approach simulating thermomechanical behaviour of frictional bodies with interface layer
2015 · H. Haddad, M. Guessasma, et al. · International Journal of Solids and Structures · 51
PDF
Simulation of sintering using a Non Smooth Discrete Element Method. Application to the study of rearrangement
2013 · S. Martin, M. Guessasma, et al. · Computational Materials Science · 47
Physical mechanisms involved into the flame propagation process through aluminum dust-air clouds: A review
2016 · Rim Ben Moussa, Christophe Proust, et al. · Journal of Loss Prevention in the Process Industries · 46
Study of the sintering kinetics of bimodal powders. A parametric DEM study
2014 · S. Martin, R. Parekh, et al. · Powder Technology · 41
On a discrete element method to simulate thermal-induced damage in 2D composite materials
2017 · W. Leclerc, H. Haddad, et al. · Computers & Structures · 37
Application of DEM to predict the elastic behavior of particulate composite materials
2015 · H. Haddad, W. Leclerc, et al. · Granular Matter · 36
Discrete element approach to simulate debonding process in 3D short glass fibre composite materials: Application to PA6/GF30
2021 · A. Ammar, W. Leclerc, et al. · Composite Structures · 34
PDF
Numerical investigation of heat conduction in heterogeneous media with a discrete element method approach
2021 · H. Haddad, W. Leclerc, et al. · International Journal of Thermal Sciences · 33
PDF
Discrete modelling of electrical transfer in multi-contact systems
2012 · K. Bourbatache, M. Guessasma, et al. · Granular Matter · 33
DEM-FEM coupling method to simulate thermally induced stresses and local damage in composite materials
2018 · W. Leclerc, H. Haddad, et al. · International Journal of Solids and Structures · 32
PDF
Electromechanical modeling by DEM for assessing internal ball bearing loading
2015 · C. Machado, M. Guessasma, et al. · Mechanism and Machine Theory · 31
DEM model for simulation of crack propagation in plasma-sprayed alumina coatings
2018 · N. Ferguen, Y. Mebdoua-Lahmar, et al. · Surface and Coatings Technology · 29
An overview of the role of capillary condensation in wet caking of powders
2016 · Zahra Afrassiabian, Mikel Leturia, et al. · Process Safety and Environmental Protection · 27
Thermomechanical modelling of friction effects in granular flows using the discrete element method
2009 · Viet Nguyen, Jérôme Fortin, et al. · Journal of mechanics of materials and structures · 24
PDF
A numerical investigation of effective thermoelastic properties of interconnected alumina/Al composites using FFT and FE approaches
2015 · W. Leclerc, N. Ferguen, et al. · Mechanics of Materials · 22
An efficient numerical model for investigating the effects of anisotropy on the effective thermal conductivity of alumina/Al composites
2014 · W. Leclerc, N. Ferguen, et al. · Advances in Engineering Software · 22
On the suitability of a 3D discrete element method to model the composite damage induced by thermal expansion mismatch
2019 · G. Alhajj Hassan, W. Leclerc, et al. · Computational Particle Mechanics · 21
DEM ball bearing model and defect diagnosis by electrical measurement
2013 · K. Bourbatache, M. Guessasma, et al. · Mechanical Systems and Signal Processing · 21
Halo approach to evaluate the stress distribution in 3D discrete element method simulation: validation and application to flax/bio based epoxy composite
2019 · D Moukadiri, W Leclerc, et al. · Modelling and Simulation in Materials Science and Engineering · 19
An improved 2D modeling of bearing based on DEM for predicting mechanical stresses in dynamic
2017 · C. Machado, M. Guessasma, et al. · Mechanism and Machine Theory · 19
Digital twin by DEM for ball bearing operating under EHD conditions
2020 · Samatar Omar Farah, Mohamed Guessasma, et al. · Mechanics & Industry · 18
PDF
Works count: 106
Citation count: 1,173
H-index: 21
I10-index: 35
Year
Topic
Type