Get started
Author

Yue Cao

Microstructures and properties of FeCrAlMoSi high entropy alloy coatings prepared by laser cladding on a titanium alloy substrate
2024 · Zhenkang Zhang, Ke Hua, et al. · Surface and Coatings Technology · 75
Fretting wear resistance at ambient and elevated temperatures of 316 stainless steel improved by laser cladding with Co-based alloy/WC/CaF2 composite coating
2023 · Haitao Ding, Yue Cao, et al. · Optics & Laser Technology · 58
Enhancing high-temperature fretting wear resistance of TC21 titanium alloys by laser cladding self-lubricating composite coatings
2024 · Ke Hua, Haitao Ding, et al. · Journal of Alloys and Compounds · 56
Revealing fretting wear resistance mechanism under liquid lead-bismuth eutectic of Cr-Al-C composite coatings fabricated by laser cladding
2024 · Yue Cao, Ke Hua, et al. · Tribology International · 41
Revealing fretting corrosion synergistic mechanism of 316 stainless steel in liquid lead-bismuth eutectic (LBE)
2023 · Ke Hua, Yue Cao, et al. · Corrosion Science · 37
Variable cycle fretting conditions meditated wear behavior and mechanism in a self-lubricating composite coating on TC21 titanium alloy substrate
2024 · Haitao Ding, Ke Hua, et al. · Tribology International · 35
Investigation on fretting wear mechanism of 316 stainless steel induced by Ni dissolution during pre-immersion corrosion in the liquid lead-bismuth eutectic (LBE)
2022 · Ke Hua, Yue Cao, et al. · Tribology International · 34
High-temperature fretting wear behavior and microstructure stability of a laser-cladding Ti-Al-C-N composite coating meditated by variable cycle conditions
2024 · Linghong Sun, Xiaoli Wang, et al. · Tribology International · 29
Revealing the critical failure factor and sub-surface damage mechanism of 316 stainless steel during fretting corrosion under the molten lead-bismuth eutectic
2023 · Yue Cao, Ke Hua, et al. · Tribology International · 26
Laser cladding combined with surface texturing on Ti-Al-C-N composite coatings: A synergistic approach to enhance friction reduction
2025 · Yue Cao, Ke Hua, et al. · Tribology International · 21
Deformation mechanisms in laser-additive carbon atoms-reinforced Ti-based coatings with exceptional high-temperature fretting resistance
2025 · Zhenkang Zhang, Ke Hua, et al. · Carbon · 20
Fabrication of composite coatings containing in-situ reacted Ti2AlC/Ti2AlN MAX phases by laser cladding and investigation of fretting wear mechanism
2024 · Linghong Sun, Yue Cao, et al. · Ceramics International · 19
Effect of laser remelting on microstructure evolution and high-temperature fretting wear resistance in a laser-cladding self-lubricating composite coating on titanium alloy substrate
2024 · Haitao Ding, Zhenkang Zhang, et al. · Surface and Coatings Technology · 16
On the mechanism of plastic deformation in metastable TiZrHfNb refractory high entropy alloys during tensile and sliding friction at 500 °C
2024 · Yue Cao, Ke Hua, et al. · Materials Science and Engineering A · 14
Subsurface deformation mechanism and the interplay relationship between strength-ductility and fretting wear resistance during fretting of a high-strength titanium alloy
2024 · Yanlin Tong, Ke Hua, et al. · Friction · 11
Electrochemically enhanced wetting of 3YSZ and Mn1.5Co1.5O4 by Ag−CuO and their application in flash joining
2023 · Yue Cao, Guo-Cheng Xu, et al. · Ceramics International · 10
Deformation and damage mechanisms in architectured MAX phase reinforced Ti-based coatings fabricated by laser direct deposition under dynamic impact and elevated-temperature fretting
2026 · Fandi Kong, Ke Hua, et al. · Carbon · 8
Synergistically achieving low friction and high wear resistance over wide-temperature-range in a composite coating for ceramic matrix composites
2025 · Xiaoli Wang, Xiaoli Wang, et al. · Journal of the European Ceramic Society · 8
Correlation between grain orientation and fretting damage mechanism in a cold-rolled TB8 titanium alloy
2025 · Zhenkang Zhang, Yanlin Tong, et al. · Surface Science and Technology · 4
PDF
Superior high-temperature wear resistance in ceramic-based coatings via laser remelting-induced microstructural modification
2025 · Xiaoli Wang, Xiaoli Wang, et al. · Ceramics International · 3
Flash joining of (La0.2Nd0.2Sm0.2Gd0.2Yb0.2)2Zr2O7 high-entropy ceramic to 3YSZ
2024 · Yue Cao, Guo-Cheng Xu, et al. · Ceramics International · 3
Investigation into the mechanisms of conditionally sensitive tribological behavior in a TiZrHfNbTa refractory high-entropy alloy
2026 · Hanming Wang, Muchen Hou, et al. · Tribology International · 2
Laser-Induced Microstructure Evolution Modulates Superior Wear-Resistant and Low-Friction Ceramic-Based Coating for High Temperatures
2025 · Xiaoli Wang, Ke Hua, et al. · SSRN Electronic Journal · 1
Works count: 23
Citation count: 531
H-index: 14
I10-index: 16
Year
Topic
Type