Get started
Author

Oleksandr Ustynenko

Observed names: A. Ustynenko, O Ustynenko, Oleksandr Ustinenko, Oleksandr V. Ustynenko, Oleksandr Vitalijovych Ustynenko, Ustinenko Alexander, Ustynenko O, Ustynenko, Oleksandr, О.В. УСТИНЕНКО, Устиненко , Олександр
ORCID: 0000-0002-6714-6122
Observed ORCID: 0000-0002-6714-6122
OpenAlex ID: A5034081288
A numerical analysis of non–linear contact tasks for the system of plates with a bolted connection and a clearance in the fixture
2016 · Oleksandr Atroshenko, Oleksiy Bondarenko, et al. · Eastern-European Journal of Enterprise Technologies · 12
PDF
Methods of Designing Gear’s Machining Tools with the Hyperboloid Cutting Part
2020 · Vorontsov Boris, Bosansky Miroslav, et al. · Strojnícky časopis/Journal of Mechanical Engineering · 11
PDF
Meshing Characteristics of Profile Shifted Cylindrical Quasi-Involute Arc-Tooth-Trace Gears. Part 1. Theoretical Base
2022 · Pavlo Tkach, Olga Reviakina, et al. · Strojnícky časopis/Journal of Mechanical Engineering · 8
PDF
Multi-criteria optimization of tracked vehicle transmissions
2019 · Oleksandr Ustynenko, Oleksiy Bondarenko, et al. · MATEC Web of Conferences · 5
PDF
Optimal Design of Spur Gears With Increased Contact Ratio
2025 · Oleksandr Ustynenko, Stanislav Cherelev, et al. · Strojnícky časopis/Journal of Mechanical Engineering · 4
Effect of Load Eccentricity on Stress Condition of Butt Welded Joint with Asymmetrical Reinforcement
2022 · Andrii Moltasov, Pavlo Tkach, et al. · Strojnícky časopis/Journal of Mechanical Engineering · 4
PDF
Multiparameter Gears and Gear-Type Variators
2022 · Mykola E. Terniuk, Anatolii V. Kryvosheia, et al. · Springer eBooks · 4
Effect of Misalignment of Axes in Double-Sided Weld on Stresses Distribution in Butt Welded Joints
2023 · Andrii Moltasov, Pavlo Tkach, et al. · Strojnícky časopis/Journal of Mechanical Engineering · 3
PDF
Mathematical Model and Optimization Algorithm By Mass of Tracked Load-Carrier/Prime Mover MT-LB Transmission
2022 · Oleksandr Ustynenko, Oleksij Bondarenko, et al. · Strojnícky časopis/Journal of Mechanical Engineering · 2
PDF
Generalized Decomposition of Transmissions of Military Wheel Vehicles to Determine the Probability of Failure-free Operation
2025 · Oleksiy Bondarenko, Oleksandr Ustynenko, et al. · Bulletin of the National Technical University «KhPI» Series Engineering and CAD · 1
PDF
Mathematical Model and Optimization Algorithm According to the Criteria of Minimum Contact Stress for Gears With Convex-concave Contact
2023 · Nickita Levin, Oleksandr Ustinenko, et al. · Bulletin of the National Technical University «KhPI» Series Engineering and CAD · 1
PDF
Meshing Characteristics of Profile Shifted Cylindrical Quasi-Involute Arc-Tooth-Trace Gears. Part 2. Calculation Results
2023 · Pavlo Tkach, Olga Reviakina, et al. · Strojnícky časopis/Journal of Mechanical Engineering · 1
PDF
A Mathematical Model of Optimization for Gears With Increased Contact Ratio
2023 · Stanislav C, Ustynenko O, et al. · Modern problems of modeling · 1
PDF
Metaheuristic Algorithms. Metaphors-strategies (review Article)
2023 · Oleksiy Bondarenko, Oleksandr Ustynenko, et al. · Bulletin of the National Technical University «KhPI» Series Engineering and CAD · 1
Review of Modern Use of Genetic and Evolutionary Algorithms. Strategies, Possibilities (review Article)
2022 · Oleksiy Bondarenko, Oleksandr Ustynenko, et al. · Bulletin of the National Technical University «KhPI» Series Engineering and CAD · 1
Optimal Design of Involute Spur Gears With Increased Contact Ratio: Objective Function, Variables Planning and Constraints
2022 · Oleksandr Ustynenko, Stanislav Cherelev, et al. · Bulletin of the National Technical University «KhPI» Series Engineering and CAD · 1
PDF
Analysis of Tenseness and Durability of the Main Parts for the Cutting Part of Ukd 200-500 Coal Shearer
2021 · Oleksandr Koval'chuk, Roman Berezhnyj, et al. · Cutting & Tools in Technological System · 1
PDF
Solving the problem of optimal design for a two-stage reducer by using a modified evolutionary algorithm
2020 · Oleksandr Ustynenko, Oleksiy Bondarenko, et al. · MATEC Web of Conferences · 1
PDF
Optimization for transmission of tracked load-carrier/prime mover MT-LB by weight: the system of constraints and the sequence of their verification
2018 · Oleksiy Bondarenko, Oleksandr Ustynenko, et al. · Bulletin of the National Technical University «KhPI» Series Engineering and CAD · 1
PDF
Research on the Geometry and Formation of Arched Teeth in Novikov Cylindrical Gears
2026 · M Matushenko, H Fedchenko, et al. · Modern problems of modeling
PDF
Design Features of the Ball Frewheel-protection Clutches
2026 · Volodymyr Malaschshenko, Vladyslav Protsenko, et al. · Bulletin of the National Technical University «KhPI» Series Engineering and CAD
PDF
On Providing Resource and Reducing the Noise of Drives of Cleaning Coal Harvesters
2026 · Vadim Dergousov, Oleksandr Permyakov, et al. · Vestnik Nacionalʹnogo tehničeskogo universiteta "HPI". Tehnologii v mašinostroenii/Vìsnik Nacìonalʹnogo tehnìčnogo unìversitetu HPÌ. Serìâ: Tehnologìï v mašinobuduvannì
PDF
Раціональна Трансмісія Військової Колісної Машини: Від Ідеї До Реалізації
2026 · Бондаренко , Олексій, Устиненко , Олександр, et al. · The Scientific Issues of Ternopil Volodymyr Hnatiuk National Pedagogical University Series pedagogy
PDF
Rational Transmission of a Military Wheeled Vehicle: From Concept to Implementation
2026 · Oleksiy Bondarenko, Oleksandr Ustynenko, et al. · Bulletin of the National Technical University «KhPI» Series Engineering and CAD
Modeling a HCR Gear with Variable Thickness of the Thin Hard Coating on the Tooth Surface for Fem Analysis
2025 · Roman Protasov, Ján Danko, et al. · Strojnícky časopis/Journal of Mechanical Engineering
PDF
Works count: 48
Citation count: 63
H-index: 4
I10-index: 2
Year
Topic
Type