Get started
Author

Takeshi Fujimatsu

Observed name: Takeshi FUJIMATSU
ORCID: 0000-0002-3856-6072
Observed ORCID: 0000-0002-3856-6072
OpenAlex ID: A5034444187
Study of rolling contact fatigue of bearing steels in relation to various oxide inclusions
2010 · Kazuya Hashimoto, Takeshi Fujimatsu, et al. · Materials & Design (1980-2015) · 140
Effect of inclusion/matrix interface cavities on internal-fracture-type rolling contact fatigue life
2011 · Kazuya Hashimoto, Takeshi Fujimatsu, et al. · Materials & Design (1980-2015) · 58
Initiation Behavior of Crack Originated from Non-Metallic Inclusion in Rolling Contact Fatigue
2010 · Norimasa Tsunekage, Kazuya Hashimoto, et al. · Journal of ASTM International · 19
Crack Initiation Behavior from Internal Defect in High Carbon-chromium Bearing Steel under Rolling Contact Fatigue
2008 · Takeshi Fujimatsu, Kazuhiko Hiraoka, et al. · 鐵と鋼 : 日本鐡鋼協會々誌 · 13
PDF
Initiation Behavior of Crack Originated from Non-Metallic Inclusion in Rolling Contact Fatigue
2010 · Norimasa Tsunekage, Kazuya Hashimoto, et al. · 9
Mechanism of Austenite Grain Coarsening during Carburizing of Cold-forged Steel Parts
2009 · Takeshi Fujimatsu, Morihiko Nakasaki, et al. · 鐵と鋼 : 日本鐡鋼協會々誌 · 7
PDF
Crystallographic Analyses on Cracks Initiated by Rolling Contact Fatigue in High Carbon Chromium Bearing Steel
2007 · Kazuhiko Hiraoka, Takeshi Fujimatsu, et al. · Materials science forum · 7
Crack Initiation and Propagation Behavior Around the Defect in Steel Under Rolling Contact Fatigue
2014 · Takeshi Fujimatsu, Toshifusa Nakamizo, et al. · ASTM International eBooks · 6
Austenite Grain Stability of Titanium-Modified Carburizing Steel
2006 · Takashi Tanaka, Takeshi Fujimatsu, et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · 6
Investigation of Fatigue Behavior around Nonmetallic Inclusion Using a Newly Developed Rolling Contact Fatigue Test Method
2020 · Takeshi Fujimatsu · 4
Clarification of Austenite Grain Formation Behavior during Carburizing of Cold-worked High-chromium Carburizing Steel
2009 · Takeshi Fujimatsu, Kazuya Hashimoto, et al. · 鐵と鋼 : 日本鐡鋼協會々誌 · 4
PDF
Influence of Repeated Quenching After Carburizing on Prior Austenite Grain Size
2007 · Takeshi Fujimatsu, Motohiro Nishikawa, et al. · Materials science forum · 4
Detailed Analysis of the Crack Behavior around the Surface Dent under Rolling Contact Fatigue
2024 · Yuma Fujioka, Izumi Ishibashi, et al. · 3
Formation Mechanism of Coarse Austenite Grain during Hot Forging and Cooling in Case Hardening Steel
2019 · Takeshi Miyazaki, Takeshi Fujimatsu, et al. · 鐵と鋼 : 日本鐡鋼協會々誌 · 3
PDF
Improvement of Fatigue Life Caused by Surface-Initiated Flaking in Rolling and Sliding Contact Condition by Modification of Subsurface Microstructure
2017 · Takashi Maruyama, Takeshi Fujimatsu, et al. · 2
Development of High Strength Carburizing Steel, ECOMAX4, with Improved Heat Treatment Distortion and Dimensional Change
2017 · Takeshi Fujimatsu, Takashi Maruyama, et al. · Materia Japan · 1
PDF
Prevention of Austenite Grain Coarsening of Carburizing Steel during Carburizing by Mn Content Optimization and its Improvement Mechanism
2007 · Takeshi FUJIMATSU, Kazuya HASHIMOTO, et al. · 鐵と鋼 : 日本鐡鋼協會々誌 · 1
PDF
チタン添加肌焼鋼ｔｍａｘ鋼の開発
2006 · Takeshi Fujimatsu, Kazuya Hashimoto, et al. · Materia Japan · 1
PDF
Uniform Dispersion Mechanism of Carbides by Subcritical Annealing at below A1 Transformation Temperature for High-chromium Case-hardening Steels
2026 · Kenta Matsuo, Takeshi Fujimatsu, et al. · ISIJ International
PDF
Geometric effects of inclusions on hydrogen embrittlement in high-strength steel
2026 · Takahiro Chiba, Eisuke Nakayama, et al. · Acta Materialia
Uniform Dispersion Mechanism of Carbides by Subcritical Annealing at below A1 Transformation Temperature for High-chromium Case-hardening Steels
2025 · Kenta Matsuo, Takeshi Fujimatsu, et al. · 鐵と鋼 : 日本鐡鋼協會々誌
PDF
Crack Behavior around a Nonmetallic Inclusion under Hydrogen Precharged Rolling Contact Fatigue
2024 · Yoshitaka Wada, Izumi Ishibashi, et al.
Prevention of Grain Coarsening during Carburizing
2011 · Takeshi Fujimatsu · 熱処理
Influence of Repeated Quenching After Carburizing on Prior Austenite Grain Size
2007 · Takeshi Fujimatsu, Motohiro Nishikawa, et al. · Materials science forum
Crystallographic Analyses on Cracks Initiated by Rolling Contact Fatigue in High Carbon Chromium Bearing Steel
2007 · Kazuhiko Hiraoka, Takeshi Fujimatsu, et al. · Materials science forum
Works count: 27
Citation count: 288
H-index: 7
I10-index: 4
Year
Topic
Type