Author

Mingyin Jia

Observed names: M Y Jia, M. Y. Jia, M.-Y. Jia, Ming-yin JIA, Ming-yin Jia, Mingyin JIA, Ming‐Yin Jia

Institution: Beijing University of Chemical Technology

Observed institutions: Xinjiang Institute of Engineering, Beijing University of Chemical Technology, Tsinghua University

ORCID: 0000-0002-9252-8245

Observed ORCID: 0000-0002-9252-8245

OpenAlex ID: A5034998434

Optimization of printing parameters of 3D-printed continuous glass fiber reinforced polylactic acid composites

2021 · Ke Chen, Liguo Yu, et al. · Thin-Walled Structures · 185

Properties of poly(vinyl chloride)/wood flour/montmorillonite composites: Effects of coupling agents and layered silicate

2006 · Yongsheng Zhao, Kejian Wang, et al. · Polymer Degradation and Stability · 145

Electrochemical Sensors Fabricated by Electrospinning Technology: An Overview

2019 · Ke Chen, Weimin Chou, et al. · Sensors · 122

PDF

Amelioration of interfacial properties for CGF/PA6 composites fabricated by ultrasound-assisted FDM 3D printing

2023 · Run Zhang, Liguo Yu, et al. · Composites Communications · 55

Impregnation modeling and preparation optimization of continuous glass fiber reinforced polylactic acid filament for 3D printing

2021 · Liguo Yu, Ke Chen, et al. · Polymer Composites · 51

Crystal Structure Evolution of UHMWPE/HDPE Blend Fibers Prepared by Melt Spinning

2017 · Fei Wang, Lichao Liu, et al. · Polymers · 50

PDF

Effect of final heating temperature on crystallization of isotactic polypropylene nucleated with an aryl amide derivative as β-form nucleating agent

2011 · Mu Dong, Ming-yin Jia, et al. · Chinese Journal of Polymer Science · 48

Thermoplastic Reaction Injection Pultrusion for Continuous Glass Fiber-Reinforced Polyamide-6 Composites

2019 · Ke Chen, Mingyin Jia, et al. · Materials · 47

PDF

Preparation and characterization of PVC-based form-stable phase change materials

2014 · Xiaoming Jin, Jianli Li, et al. · Solar Energy Materials and Solar Cells · 45

The influence of formation temperatures on the crystal structure and mechanical properties of ultrahigh-molecular-weight polyethylene/high-density polyethylene-blend fibers prepared by melt spinning

2019 · Fei Wang, Lichao Liu, et al. · Journal of Industrial Textiles · 26

Studies on positive conveying in helically channeled single screw extruders

2012 · L. Pan, M. Y. Jia, et al. · eXPRESS Polymer Letters · 21

PDF

Optimization of initiator and activator for reactive thermoplastic pultrusion

2019 · Ke Chen, Mingyin Jia, et al. · Journal of Polymer Research · 20

Effect of Polymer Blends on the Properties of Foamed Wood-Polymer Composites

2019 · Suwei Wang, Ping Xue, et al. · Materials · 19

PDF

Biodegradation and mechanical property of polylactic acid/thermoplastic starch blends with poly (ethylene glycol)

2013 · Ping Xue, Kejian Wang, et al. · Journal of Wuhan University of Technology-Mater Sci Ed · 18

Creep behaviour of wood flour/poly(vinyl chloride) composites

2009 · Mingyin Jia, Ping Xue, et al. · Journal of Wuhan University of Technology-Mater Sci Ed · 15

Thermal and mechanical properties of the continuous glass fibers reinforced PVC composites prepared by the wet powder impregnation technology

2020 · Suwei Wang, Yongqiang Liu, et al. · Journal of Polymer Research · 14

Improvement of Mechanical Properties of Wood-Plastic Composite Floors Based on the Optimum Structural Design

2016 · Yang Zhang, Ping Xue, et al. · Acta Mechanica Solida Sinica · 14

The property of polycarbonate/acrylonitrile butadiene styrene‐based conductive composites filled by nickel‐coated carbon fiber and nickel–graphite powder

2015 · Tong Chen, Ping Xue, et al. · Polymer Composites · 14

Study on molding process of UHMWPE microporous filter materials

2012 · Qiang Zhang, Mingyin Jia, et al. · Journal of Applied Polymer Science · 14

Effect of styrene–acrylonitrile on the electrical resistivity of polycarbonate/multiwalled carbon nanotube composites

2011 · Yao Sun, Ming‐Yin Jia, et al. · Journal of Applied Polymer Science · 14

Characterization of plasticizing process of single screw extruder with grooved melting zone

2020 · Ke Chen, Yonghui Cui, et al. · Journal of Polymer Research · 12

A Study of the Mechanical Behavior and Crystal Structure of UHMWPE/HDPE Blend Fibers Prepared by Melt Spinning

2018 · Fei Wang, Lichao Liu, et al. · Journal of Engineered Fibers and Fabrics · 12

Dual nozzle 3D printing strategy to improve the surface quality of continuous glass fiber reinforced polyamide 6 composites

2023 · Wenyi Xu, Liguo Yu, et al. · Journal of Applied Polymer Science · 11

Optimization of process parameters for the preparation of continuous glass fiber‐reinforced Nylon 6 composites by vacuum bagging process

2022 · Xianwen Dong, Ke Chen, et al. · Journal of Applied Polymer Science · 11

Study on the melting performance of single screw extruder with grooved melting zone and barr screw

2014 · X.-M. Jin, M.-Y. Jia, et al. · Journal of Materials Processing Technology · 11

Works count: 53

Citation count: 1,097

H-index: 15

I10-index: 26