Author

Rishitosh Ranjan

Institution: KIIT University

Observed institution: KIIT University

ORCID: 0000-0002-6400-5981

Observed ORCID: 0000-0002-6400-5981

OpenAlex ID: A5035243634

Effect of Cooling Slope Process Parameters on Non-dendritic Feedstock Production: A Comprehensive Review

2021 · Rishitosh Ranjan, B. Surekha, et al. · Journal of The Institution of Engineers (India) Series C · 9

Experimental investigations and multi criteria optimization during machining of A356/WC MMCs using EDM

2022 · Akash Singh, Karan Kumar, et al. · Decision Science Letters · 6

PDF

Regression model based properties prediction of A356 aluminum alloy rheocast using cooling slope technique

2024 · Rishitosh Ranjan, B. Surekha, et al. · Discover Applied Sciences · 3

PDF

Performance Prediction of a Model Tesla Valve With Different Geometrical Configuration

2022 · Prakash Ghose, Tarak Kumar Sahoo, et al. · International Journal of Fluid Mechanics Research · 3

A novel CFD approach to determine the size of an automotive radiator through data extrapolation method

2026 · Prakash Ghose, Kunja Bihari Sahu, et al. · AIP conference proceedings · 1

Effect of Electrode Material Variations on Wear Characteristics of Stir Cast A356/Red Mud/TiC Hybrid Metal Matrix Composite During Electrical Discharge Machining

2024 · Debasmita Pani, B. Surekha, et al. · Tribology in Industry · 1

PDF

Influence of Dielectric Medium on Machining Performance of Functionally Graded Materials Fabricated via Liquid-Phase Processing

2026 · B. Surekha, Rishitosh Ranjan, et al. · Journal of Materials Engineering and Performance

Study on Machining Capabilities of Mg/Zn and Mg/Al Functionally Graded Materials Fabricated Using Liquid Processing Route

2025 · B. Surekha, Rishitosh Ranjan, et al. · Journal of Inorganic and Organometallic Polymers and Materials

Machinability of fabricated Al/Mg-based functionally graded material with Pb interfacing foil using liquid processing route

2023 · T. Raviteja, B. Surekha, et al. · Materials Today Proceedings

Computational Modeling of Partial Phase Change in the Hypoeutectic Binary Alloy Al–7Si Melt over a Cooled Tilted Plate

2023 · Rishitosh Ranjan, P. Ghose, et al. · Journal of Engineering Physics and Thermophysics

Computational Modeling of a Gas-Fired Walking Beam Reheat Furnace for Billet Heating and Scale Formation Prediction

2022 · Prakash Ghose, Tarak Kumar Sahoo, et al. · Lecture notes in mechanical engineering

Performance Evaluation of Ti6A14V During High Speed Turning Using Carbide Coated Insert

2022 · S. Rama Rao, Rishitosh Ranjan, et al. · CRC Press eBooks

Effect of ignition temperature at air-inlet and radiation on temporal soot growth of turbulent diffusion flame

2022 · Prakash Ghose, Tarak Kumar Sahoo, et al. · Proceeding of Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India

Computational Modeling to Investigate the Heat Transfer Enhancement by Using Ethyl Glycol–Water–MWCNT Nanofluid Through Corrugated Pipe

2020 · Prakash Ghose, Rishitosh Ranjan · Lecture notes in mechanical engineering

Effect of Ground Clearance and Air Temperature on Drag and Lift for NACA 2412 Airfoil

2020 · Prakash Ghose, Rishitosh Ranjan · Lecture notes in mechanical engineering

Numerical Investigation of Vortex Induced Vibration of Two Cylinders in Side by Side Arrangement

2016 · Sourav Kumar Kar, Harshit Mishra, et al. · International Journal of Engineering Trends and Technology

Effect of Tube Spacing on the Vortex Shedding and Hydrodynamic Forces for Laminar Flow Past a Pair of Cylinders in Tandem Arrangement: a Numerical Investigation

2013 · Goutam Mandal, Rishitosh Ranjan

Works count: 17

Citation count: 23

H-index: 3

I10-index: