Author

Petr Kubík

Observed names: Kubik Petr, Kubík, Petr, P Kubík, P. KUBIK, P. Kubík, Petr Kubik

Institution: Brno University of Technology

Observed institutions: Institute of Solid Mechanics, Mendel University in Brno, Brno University of Technology

ORCID: 0000-0003-1992-0563

Observed ORCID: 0000-0003-1992-0563

OpenAlex ID: A5035395302

Calibration of ductile fracture criteria at negative stress triaxiality

2016 · Petr Kubík, František Šebek, et al. · International Journal of Mechanical Sciences · 79

Lode dependent plasticity coupled with nonlinear damage accumulation for ductile fracture of aluminium alloy

2017 · František Šebek, Jindřich Petruška, et al. · Materials & Design · 44

Comparative investigation of ductile fracture with 316L austenitic stainless steel in small punch tests: Experiments and simulations

2018 · Petr Kubík, František Šebek, et al. · Theoretical and Applied Fracture Mechanics · 28

Strain hardening exponent role in phenomenological ductile fracture criteria

2015 · František Šebek, Petr Kubík, et al. · European Journal of Mechanics - A/Solids · 27

Modelling of impact behaviour of European beech subjected to split Hopkinson pressure bar test

2020 · František Šebek, Petr Kubík, et al. · Composite Structures · 19

Notched specimen under compression for ductile failure criteria

2018 · Petr Kubík, František Šebek, et al. · Mechanics of Materials · 19

Solution to problems caused by associated non-quadratic yield functions with respect to the ductile fracture

2022 · Radek Vobejda, František Šebek, et al. · International Journal of Plasticity · 17

Sequential simulation and neural network in the stress–strain curve identification over the large strains using tensile test

2017 · Ivan Jeník, Petr Kubík, et al. · Archive of Applied Mechanics · 16

Ductile fracture predictions in small punch testing of cold-rolled aluminium alloy

2018 · František Šebek, Namsu Park, et al. · Engineering Fracture Mechanics · 15

Extremely Low-Stress Triaxiality Tests in Calibration of Fracture Models in Metal-Cutting Simulation

2016 · František Šebek, Petr Kubík, et al. · Metallurgical and Materials Transactions A · 12

Calibration of Selected Ductile Fracture Criteria Using Two Types of Specimens

2013 · Petr Kubík, František Šebek, et al. · Key engineering materials · 10

Linear woodcutting of European beech: experiments and computations

2022 · Petr Kubík, František Šebek, et al. · Wood Science and Technology · 9

PDF

Orthotropic elastic–plastic–damage model of beech wood based on split Hopkinson pressure and tensile bar experiments

2021 · František Šebek, Petr Kubík, et al. · International Journal of Impact Engineering · 9

A Fully Coupled Thermomechanical Damage Analysis of Hot Closed Die Forging Using Finite Element Modeling

2020 · Michal Nytra, Petr Kubík, et al. · Journal of Materials Engineering and Performance · 8

Computational prediction of chevron cracking during multi-pass cold forward extrusion

2023 · Petr Kubík, Jindřich Petruška, et al. · Journal of Manufacturing Processes · 6

Ductile Fracture Criteria in Prediction of Chevron Cracks

2013 · Jindřich Petruška, Petr Kubík, et al. · Advanced materials research · 6

PDF

Ductile Failure Predictions for the Three-Point Bending Test of a Complex Geometry Made From Aluminum Alloy

2019 · Petr Kubík, František Šebek, et al. · Journal of Engineering Materials and Technology · 5

Behavior of Lode Dependent Plasticity at Plane Strain Condition and its Implication to Ductile Fracture

2016 · František Šebek, Jindrich Petruška, et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · 4

Prediction of central bursting in the process of forward extrusion using the uncoupled ductile failure models

2015 · František Šebek, Petr Kubík, et al. · Advances in Materials and Processing Technologies · 4

Plasticity and ductile fracture of conventionally manufactured AISI 316L compared to one produced by selective laser melting with and without machining

2025 · František Šebek, Petr Kubík, et al. · The International Journal of Advanced Manufacturing Technology · 3

Fracture predictions in impact three-point bending test of European beech

2024 · Petr Kubík, František Šebek, et al. · Journal of Wood Science · 3

PDF

Chevron Crack Prediction Using the Extremely Low Stress Triaxiality Test

2015 · Frantisek Sebek, Petr Kubik, et al. · MM Science Journal · 3

On the Proportionality of Damage Rule in Finite Element Simulations of the Ductile Failure

2014 · František Šebek, Jiří Hůlka, et al. · Advanced materials research · 3

PDF

Multiaxial ductile fracture criteria coupled with non-quadratic non-prismatic yield surface in the predictions for a naturally aged aluminium alloy

2022 · František Šebek, Petr Kubík, et al. · International Journal of Fracture · 2

Lode dependent plasticity in the prediction of deformation states of tensile specimens

2019 · Petr Kubík, Jindřich Petruška, et al. · Procedia Structural Integrity · 2

PDF

Works count: 52

Citation count: 362

H-index: 10

I10-index: 11