Get started
Author

M.M. Bakradze

Observed names: M. M. Bakradze, Бакрадзе М.М., Бакрадзе, М.М., М М Бакрадзе, М. М. Бакрадзе
ORCID: 0000-0002-4820-8551
Observed ORCID: 0000-0002-4820-8551
OpenAlex ID: A5035803275
Low-Cycle Fatigue under Controlled Deformation and Fracture of the Superalloy VZh175
2018 · M. S. Belyayev, V. F. Terentyev, et al. · Inorganic Materials Applied Research · 27
NEW HIGH STRENGTH STRUCTURAL AND CORROSION-RESISTANT STEELS FOR AEROSPACE EQUIPMENT DEVELOPED BY FSUE «VIAM» (review)
2020 · E.N. Kablov, M.M. Bakradze, et al. · Aviacionnye materialy i tehnologii · 25
Development of Ni-Base Superalloy with Operating Temperature up to 800°C for Gas Turbine Disks
2018 · M. M. Bakradze, S. V. Ovsepyan, et al. · Inorganic Materials Applied Research · 17
The application of new wrought nickel alloys for advanced gas turbine engines
2017 · B.S. Lomberg, S.V. Ovsepyan, et al. · Aviacionnye materialy i tehnologii · 17
Physicochemical Properties of Sm2O3–ZrO2–HfO2 Ceramics for the Development of Promising Thermal Barrier Coatings
2021 · M. M. Bakradze, O. N. Doronin, et al. · Russian Journal of Inorganic Chemistry · 12
Computer modeling of technological metal forming processes as effective instrumentfor development of new technologies
2017 · M.M. Bakradze, A.V. Skugorev, et al. · Aviacionnye materialy i tehnologii · 8
Next-Generation Materials and Digital Additive Technologies for the Production of Resource Parts in FGUP VIAM: I. Synthesis Materials and Technologies
2022 · E. N. Kablov, A. G. Evgenov, et al. · Russian Metallurgy (Metally) · 6
PARTICULARS OF THE PRECIPITATION STRENGTHENING γʹ-PHASE DURING AGING OF HEAT-RESISTANT WROUGHT NICKEL SUPERALLOY VZh175-ID
2019 · E.N. Kablov, M.N. Letnikov, et al. · Proceedings of VIAM · 6
Development principles and alloying features of p/m NI base superalloys for jet-engine disks application
2016 · A.M. Volkov, A.V. Vostrikov, et al. · Proceedings of VIAM · 6
Hot isostatic pressing and deformation of the granulated heat resistant nickel alloys
2016 · E.I. Razuvaev, M.V. Bubnov, et al. · Aviacionnye materialy i tehnologii · 6
Heat-Resistant Wrought Weldable Alloy for GTE Components with Low Linear Thermal Expansion Coefficient
2013 · S. V. Ovsepyan, B. S. Lomberg, et al. · Metallurgist · 6
Исследование физико-химических свойств керамики на основе системы Sm 2 O 3 –ZrO 2 –HfO 2 для разработки перспективных теплозащитных покрытий
2021 · М. М. Бакрадзе, О. Н. Доронин, et al. · Журнал неорганической химии · 5
INFLUENCE OF QUENCH RATE ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NICKEL-BASED WROUGHT SUPERALLOY VZh175-ID
2019 · M.N. Letnikov, B.S. Lomberg, et al. · Aviacionnye materialy i tehnologii · 5
ON TECHNOLOGICAL APPROACHES TO THE CREATION OF COMPOSITE MATERIALS BASED ON NICKEL MONOALUMINIDE NiAl (review)
2019 · M.M. Karashaev, B.S. Lomberg, et al. · Proceedings of VIAM · 5
PDF
Phase Composition Formation in a V-1469 Alloy (Al–Cu–Li System) during Friction Stir Welding
2018 · S. Ya. Betsofen, S. V. Sbitneva, et al. · Russian Metallurgy (Metally) · 5
THE COMPARISON OF POWDER PRODUCED BY GAS ATOMIZATION AND BY PLASMA ROTATE ELECTRODE PROCESS IN THE POINT OF PRODUCTION DISK BILLETS FROM Ni-BASE SUPERALLOYS
2018 · A.M. Volkov, A.A. Shestakova, et al. · Proceedings of VIAM · 5
PDF
The effect of thermomechanical and heat treatment parameters on structure and mechanical properties of superalloy VZH177
2016 · A.A. Buiakina, M.N. Letnikov, et al. · Proceedings of VIAM · 5
Development and research of a new granular disk alloy VZh178P for advanced aviation GTE
2018 · FSUE “VIAM” SRS RF, Moscow, Russia, A. V. Vostrikov, et al. · Nonferrous Metals · 4
Method of large-sized deformed turbine discs manufacturing from EK151-ID industrial ingots with limited diameter (320 mm)
2017 · M.M. Bakradze, B.S. Lomberg, et al. · Proceedings of VIAM · 4
Structural-phase evolution of VZH175-alloy during hot deformation and heat treatment
2014 · E.V. Filonov, M.M. Bakradze, et al. · Aviacionnye materialy i tehnologii · 4
Next-Generation Materials and Digital Additive Technologies for the Production of Resource Parts in FGUP VIAM: II. Deviation Compensation and Control, HIP, and Heat Treatment
2022 · E. N. Kablov, A. G. Evgenov, et al. · Russian Metallurgy (Metally) · 3
Special Features of Formation of Surface by Selective Laser Melting
2022 · M. M. Bakradze, A. M. Rogalev, et al. · Metal Science and Heat Treatment · 3
ALTERNATIVE TECHNOLOGIES OF THE INCRESING OF MECHANICAL PROPERTIES OF P/M Ni-BASED SUPERALLOYS FOR JET-ENGINE DISK APPLICATION (review)
2019 · A.M. Volkov, M.M. Karashaev, et al. · Proceedings of VIAM · 3
THE FEATURES OF THE GRAINS SIZE CHANGING IN THE P/M Ni-BASE SUPERALLOY FOR DISKS APPLICATION PRODUCED VIA DIFFERENT TECHNOLOGIES
2018 · M.M. Bakradze, A.M. Volkov, et al. · Proceedings of VIAM · 3
Technological Features of Fusion Welding of Aluminum Alloy V-1579
2018 · M.D. Panteleev, M.M. Bakradze, et al. · Aviacionnye materialy i tehnologii · 3
Works count: 65
Citation count: 215
H-index: 6
I10-index: 5
Year
Topic
Type