2022 · Soji Matsubayashi, Ryota Hayashi, et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · 3

Weibull Distribution to Evaluate the Reliability of PEEK Thrust Bearings under Rolling Contact Fatigue in Water

2022 · Kerrie Gray, Takahiro Matsueda, et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · 3

New evaluation method of crack initiation limit in notched specimen: effect of notch shape on aspect ratio of low carbon alloy steels (JIS, S15C, S35C and S45C)

2014 · T. Matsueda · Materials Research Innovations · 3

A New Evaluation Method to Calculate Crack Initiation Limit with Modified Crack Aspect Ratios in Notched Specimen of Carbon Steels

2014 · Takahiro Matsueda · Applied Mechanics and Materials · 3

Effect on PEEK/Graphite Film for Raceway Surface of PEEK Hybrid Ball Bearings with Surface Crack

2024 · H. Koike, T. Harajiri, et al. · Springer Proceedings in Materials · 2

Characterization of Crack Growth Behavior of Carburized SCM415 Steel under Cyclic Rotating Bending

2019 · Takahiro Matsueda, Kei Ushizima, et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · 2

Observation of wear around surface crack of PEEK thrust bearing under rolling contact fatigue in water

2024 · Sasuga Machino, Shogo Shinkai, et al. · Journal of Physics Conference Series · 1

Effect of tensile speeds on mechanical properties of Young’s modulus and Poisson’s ratio of 3D-printed ABS-like specimens

2024 · Shuhei Kajiwara, Shun Yamashita, et al. · Journal of Physics Conference Series · 1

PDF

Influence of Groove Roughness on Crack Initiation of PEEK Thrust Bearing in Water

2023 · Takahiro Matsueda, Katsuyuki Kida · Materials science forum · 1

Effects of Loading Magnitude and Fatigue Crack Growth on Crack Opening-Closing Behavior on Silicon Nitride Ball under Cyclic Compression

2023 · Soji Matsubayashi, Takumi Toriki, et al. · Materials science forum · 1

Evaluation of Internal Crack Growth of PPS Thrust Bearings under Rolling Contact Fatigue in Water

2021 · Shintaro Kanagawa, Takahiro Matsueda, et al. · Key engineering materials · 1

Observation of Crack Originating from Non-Metallic Inclusions in Furnace-Induction Heated SUJ2 Steel under One-Point Rolling Contact Fatigue at High Contact Pressure

2021 · Koshiro Mizobe, Yuto Nakamura, et al. · Materials science forum · 1

Surface Observation of Induction-Heated 13Cr-2Ni-2Mo Stainless Steel after Interrupted Fatigue Testing under Rolling Contact Stress in Water

2021 · Koshiro Mizobe, Takahiro Matsueda, et al. · Diffusion and defect data, solid state data. Part B, Solid state phenomena/Solid state phenomena · 1

Effect of Lamination Direction on the AE Behavior of 3D Printed Specimen during Tensile Testing

2020 · Koshiro Mizobe, Takahiro Matsueda, et al. · Key engineering materials · 1

Distribution of Aspect Ratio of Fatigue Crack at Notch Root Depending on Crack Initiation Point of Annealed Steel, JIS S45C

2017 · Takahiro Matsueda, Masayuki Ishida, et al. · Materials science forum · 1

Effects of Grain Size on Crack Aspect Ratio and Crack Initiation Limit in Notched Specimen of Austenitic Stainless Steel (JIS SUS304)

2014 · Takahiro Matsueda · Applied Mechanics and Materials · 1

An Alternative Method to Evaluate Endurance Limit in Plain Steel Specimens (JIS, S15C, S45C and A286)

2014 · Takahiro Matsueda · Applied Mechanics and Materials · 1

Fatigue Limit Evaluation of Blunt-Notched Specimen Using ΔKth Value of Small Crack (1st Report: Study on the Determination of the Initial Crack Size with Annealed Carbon Steel When Stress Ratio Is Zero)

2011 · Takahiro MATSUEDA, Yuuta AONO, et al. · TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A · 1

PDF

A Statistical Comparative Analysis of Test Score Distribution Trends between the Total Population and Subgroups