Get started
Author

Mahir Uzun

Observed names: M. UZUN, M. Uzun, Mahir UZUN, UZUN, MAHİR, Uzun, Mahir, mahir uzun
Institution: Inonu University
ORCID: 0000-0002-0907-6875
Observed ORCID: 0000-0002-0907-6875
OpenAlex ID: A5036197384
Tool wear, surface roughness, cutting temperature and chips morphology evaluation of Al/TiN coated carbide cutting tools in milling of Cu–B–CrC based ceramic matrix composites
2021 · Üsame Ali Usca, Mahir Uzun, et al. · Journal of Materials Research and Technology · 107
PDF
Investigation on microstructure, mechanical, and tribological performance of Cu base hybrid composite materials
2021 · Serhat Şap, Mahir Uzun, et al. · Journal of Materials Research and Technology · 74
PDF
Investigation of the Effects of Cooling and Lubricating Strategies on Tribological Characteristics in Machining of Hybrid Composites
2022 · Serhat Şap, Üsame Ali Usca, et al. · Lubricants · 65
PDF
Tribological Aspects, Optimization and Analysis of Cu-B-CrC Composites Fabricated by Powder Metallurgy
2021 · Üsame Ali Usca, Mahir Uzun, et al. · Materials · 64
PDF
Estimation, optimization and analysis based investigation of the energy consumption in machinability of ceramic-based metal matrix composite materials
2022 · Üsame Ali Usca, Serhat Şap, et al. · Journal of Materials Research and Technology · 55
PDF
Investigation of machinability of Ti–B-SiCp reinforced Cu hybrid composites in dry turning
2022 · Serhat Şap, Mahir Uzun, et al. · Journal of Materials Research and Technology · 50
PDF
Evaluation of Mechanical and Tribological Aspect of Self-Lubricating Cu-6Gr Composites Reinforced with SiC–WC Hybrid Particles
2022 · Üsame Ali Usca, Serhat Şap, et al. · Nanomaterials · 44
PDF
Determination of machinability metrics of AISI 5140 steel for gear manufacturing using different cooling/lubrication conditions
2022 · Üsame Ali Usca, Mahir Uzun, et al. · Journal of Materials Research and Technology · 43
PDF
Effect of Cr particulate reinforcements in different ratios on wear performance and mechanical properties of Cu matrix composites
2018 · Mahir Uzun, U. Ali Usca · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 42
Investigation of microstructure and mechanical properties of Cu/Ti–B–SiCp hybrid composites
2021 · Serhat Şap, Aydın Turgut, et al. · Ceramics International · 39
Investigations on tool wear, surface roughness, cutting temperature, and chip formation in machining of Cu-B-CrC composites
2021 · Üsame Ali Usca, Mahir Uzun, et al. · The International Journal of Advanced Manufacturing Technology · 39
Influence of tool path strategies on machining time, tool wear, and surface roughness during milling of AISI X210Cr12 steel
2022 · Mahir Uzun, Üsame Ali Usca, et al. · The International Journal of Advanced Manufacturing Technology · 38
Evaluation of Machinability of Cu Matrix Composite Materials by Computer Numerical Control Milling under Cryogenic LN2 and Minimum Quantity Lubrication
2022 · Üsame Ali Usca, Serhat Şap, et al. · Journal of Materials Engineering and Performance · 31
Performance evaluation of AlTiN coated carbide tools during machining of ceramic reinforced Cu-based hybrid composites under cryogenic, pure-minimum quantity lubrication and dry regimes
2022 · Serhat Şap, Üsame Ali Usca, et al. · Journal of Composite Materials · 31
Determination of mechanical and tribological properties of vacuum sintered hybrid reinforced Al-4Cu composites
2024 · Üsame Ali Usca, Serhat Şap, et al. · Journal of Composite Materials · 30
Investigation of characteristics of Cu based, Co-CrC reinforced composites produced by powder metallurgy method
2021 · Mahir Uzun, Mehmet Sinan Çetin · Advanced Powder Technology · 29
Tribological behaviors and mechanical properties of novel Al-5Cu hybrid composites under dry sliding conditions
2024 · Serhat Şap, Ünal Değirmenci, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 28
Evaluation of Machinability and Energy Consumption of CK45 Steel Using Synthetic-Based Nanofluid and Minimum Quantity Lubrication Cutting Fluid
2025 · Emine Şap, Üsame Ali Usca, et al. · Metals · 21
PDF
Eriyik Yığma Modellemesi ile Üretimde Takviyesiz ve Takviyeli PLA Kullanımının Mekanik Özelliklere Etkisinin Araştırılması
2020 · Mahir UZUN, Yusuf Eren ERDOĞDU · Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi · 16
PDF
Development of the hardness, three-point bending, and wear behavior of self-lubricating Cu-5Gr/Al 2 O 3 -Cr 3 C 2 hybrid composites
2023 · Serhat Şap, Üsame Ali Usca, et al. · Journal of Composite Materials · 14
The investigation on manufacturing time of a new type concave-convex gear by a CNC milling machine
2014 · Mahir Uzun · The International Journal of Advanced Manufacturing Technology · 14
Machining and optimization of reinforced copper composites using different cooling-lubrication conditions
2022 · Emine Şap, Üsame Ali Usca, et al. · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 13
Evaluation of wear performance of cryogenically treated Vanadis 4 Extra tool steel
2016 · I. GUNES, M. UZUN, et al. · Kovove Materialy-Metallic Materials · 13
PDF
Assessment of the machinability and energy consumption characteristics of Cu–6Gr hybrid composites under sustainable operating
2024 · Üsame Ali Usca, Serhat Şap, et al. · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 11
Manufacturing the new type concave–convex profile involute gears modeled by CAD–CAM in CNC milling machines
2014 · Mahir Uzun, Ali Inan · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 9
Works count: 46
Citation count: 973
H-index: 18
I10-index: 24
Year
Topic
Type