Get started
Author

Şenol Şirin

Observed names: Şenol ŞİRİN, Şirin, Şenol, ŞİRİN, Şenol, ŞİRİN, Şenol; DÜZCE ÜNİVERSİTESİ, GÜMÜŞOVA MESLEK YÜKSEKOKULU
Observed institution: Düzce Üniversitesi
ORCID: 0000-0002-3629-9003
Observed ORCID: 0000-0002-3629-9003
OpenAlex ID: A5037454558
The effect of addition of hBN nanoparticles to nanofluid-MQL on tool wear patterns, tool life, roughness and temperature in turning of Ni-based Inconel 625
2019 · Çağrı Vakkas Yıldırım, Murat Sarıkaya, et al. · Tribology International · 375
Evaluation of tool wear, surface roughness/topography and chip morphology when machining of Ni-based alloy 625 under MQL, cryogenic cooling and CryoMQL
2020 · Çağrı Vakkas Yıldırım, Turgay Kıvak, et al. · Journal of Materials Research and Technology · 307
PDF
Machinability performance of nickel alloy X-750 with SiAlON ceramic cutting tool under dry, MQL and hBN mixed nanofluid-MQL
2020 · Şenol Şirin, Murat Sarıkaya, et al. · Tribology International · 202
Performances of different eco-friendly nanofluid lubricants in the milling of Inconel X-750 superalloy
2019 · Şenol Şirin, Turgay Kıvak · Tribology International · 164
Influence of MoS2 based nanofluid-MQL on tribological and machining characteristics in turning of AA 2024 T3 aluminum alloy
2021 · Ayşegül Yücel, Çağrı Vakkas Yıldırım, et al. · Journal of Materials Research and Technology · 126
PDF
Effects of hybrid nanofluids on machining performance in MQL-milling of Inconel X-750 superalloy
2021 · Şenol Şirin, Turgay Kıvak · Journal of Manufacturing Processes · 121
Performance evaluation of whisker-reinforced ceramic tools under nano-sized solid lubricants assisted MQL turning of Co-based Haynes 25 superalloy
2021 · Murat Sarıkaya, Şenol Şirin, et al. · Ceramics International · 87
Study on turning performance of PVD TiN coated Al2O3+TiCN ceramic tool under cutting fluid reinforced by nano-sized solid particles
2020 · Turgay Kıvak, Murat Sarıkaya, et al. · Journal of Manufacturing Processes · 77
Investigation of the performance of cermet tools in the turning of Haynes 25 superalloy under gaseous N2 and hybrid nanofluid cutting environments
2022 · Şenol Şirin · Journal of Manufacturing Processes · 67
Effects of 3D-printed PLA material with different filling densities on coefficient of friction performance
2022 · Şenol Şirin, Enes Aslan, et al. · Rapid Prototyping Journal · 65
Performance of cryogenically treated carbide inserts under sustainable cryo-lubrication assisted milling of Inconel X750 alloy
2021 · Şenol Şirin, Çağrı Vakkas Yıldırım, et al. · Sustainable materials and technologies · 63
A tribological performance of vegetable-based oil combined with GNPs and hBN nanoparticles on the friction-wear tests of titanium grade 2
2023 · Şenol Şirin, Sıtkı Akıncıoğlu, et al. · Tribology International · 58
The effect of nanofluids reinforced with different surfactants on the machining and friction-wear properties of Waspaloy
2023 · Çağrı Vakkas Yıldırım, Şenol Şirin, et al. · Tribology International · 54
A comparative study on the tribological behavior of mono&proportional hybrid nanofluids for sustainable turning of AISI 420 hardened steel with cermet tools
2021 · Çağrı Vakkas Yıldırım, Şenol Şirin, et al. · Journal of Manufacturing Processes · 47
Evaluation of machining characteristics of SiO2 doped vegetable based nanofluids with Taguchi approach in turning of AISI 304 steel
2023 · Ayşegül Çakır Şencan, Şenol Şirin, et al. · Tribology International · 37
Comprehensive analysis of cutting temperature, tool wear, surface integrity and tribological properties in sustainable milling of Ti6Al4V alloy: LN2, nanofluid and hybrid machining
2024 · Emine Şirin, Çağrı Vakkas Yıldırım, et al. · Journal of Manufacturing Processes · 36
A new lubrication approach in the SPIF process: Evaluation of the applicability and tribological performance of MQL
2022 · Nuri Şen, Şenol Şirin, et al. · Tribology International · 33
Real-time monitoring and measurement of energy characteristics in sustainable machining of titanium alloys
2023 · Munish Kumar Gupta, Mehmet Erdi Korkmaz, et al. · Measurement · 32
Evaluation of the tribological performance of the green hBN nanofluid on the friction characteristics of AISI 316L stainless steel
2021 · Sıtkı Akincioğlu, Şenol Şirin · Industrial Lubrication and Tribology · 32
An attempt towards green machining of Ni-based Hastelloy C4 alloy: Effect of vegetable oils and their combination with TiO2 and SiO2 nanoparticles on outputs
2023 · Çağrı Vakkas Yıldırım, Şenol Şirin, et al. · Sustainable materials and technologies · 27
Comparison of VT-20 alloy drilling performance evaluation under dry, MQL, EMQL, and hybrid nanoparticle assisted EMQL ecological conditions
2024 · Navneet Khanna, Prassan Shah, et al. · Tribology International · 24
Effect of hBN and SDS added vegetable based cutting fluid application on the performance of turning Ti6Al4V alloys: A Comparative analysis with Taguchi and ANN approaches
2024 · Muhammet Çelik, Ayşegül Çakır Şencan, et al. · Materials Chemistry and Physics · 22
Machine vision-based gradient-boosted tree and support vector regression for tool life prediction in turning
2023 · Prashant J. Bagga, Kaushik M. Patel, et al. · The International Journal of Advanced Manufacturing Technology · 22
PDF
Investigation of the Performance of Ecological Cooling/Lubrication Methods in the Milling of AISI 316L Stainless Steel
2021 · Emine Şirin, Şenol Şirin · İmalat Teknolojileri ve Uygulamaları · 19
Experimental research on sustainable drilling of Hastelloy X superalloy: Impact of hBN, GNP, LN2 and hybrid eco-friendly cooling/lubrication strategies
2024 · Emine Şirin, Çağrı Vakkas Yıldırım, et al. · Tribology International · 15
Works count: 59
Citation count: 2,179
H-index: 22
I10-index: 26
Year
Topic
Type