Get started
Author

Julien Brocail

Flexural wave band gaps in metamaterial plates: A numerical and experimental study from infinite to finite models
2018 · S. Zouari, J. Brocail, et al. · Journal of Sound and Vibration · 88
Identification of a friction model for modelling of orthogonal cutting
2010 · J. Brocail, M. Watremez, et al. · International Journal of Machine Tools and Manufacture · 56
Identification of the flexural stiffness parameters of an orthotropic plate from the local dynamic equilibrium without a priori knowledge of the principal directions
2017 · Frédéric Ablitzer, Charles Pézerat, et al. · Journal of Sound and Vibration · 32
Dynamical properties of flax fibre reinforced PA11 over a large frequency range
2018 · Federico Amenini, Julien Brocail, et al. · Composites Science and Technology · 14
Finite element modelling of orthogonal cutting: sensitivity analysis of material and contact parameters
2012 · M. Watremez, D. Méresse, et al. · International Journal of Simulation and Process Modelling · 9
Band gap formation in thin plates with a periodic array of resonators
2017 · Sahar Zouari, Jean-Michel Genevaux, et al. · Mechanics & Industry · 8
Contact and friction analysis at tool-chip interface to high-speed machining
2008 · J. Brocail, M. Watremez, et al. · International Journal of Material Forming · 8
Measurement of the thermal contact parameters at a workpiece – tool interface in a HSM process
2008 · E. Guillot, B. Bourouga, et al. · International Journal of Material Forming · 6
Influence of Substrate Location on Mechanical Behaviour of Glass Fibre Composite Materials with Embedded Printed Electronics
2024 · Rémi Trinta, Julien Brocail, et al. · Applied Composite Materials · 5
High Speed Machining: A New Approach To Friction Analysis At Tool-Chip Interface
2007 · J. Brocail, M. Watremez, et al. · AIP conference proceedings · 4
Dynamic Recrystallization Observed at the Tool/Chip Interface in Machining
2015 · Yannick Senecaut, Michel Watremez, et al. · Key engineering materials · 2
Elasto-frictional reduced model of a cyclically sheared container filled with particles
2025 · Antoine Faulconnier, Stéphane Job, et al. · Granular Matter · 1
PDF
Analyse expérimentale et numérique du contact à l'interface outil-copeau lors de l'usinage à grande vitesse des métaux
2009 · Julien Brocail · HAL · 1
Inertial Amplification Metastructure Absorber for Lightweight Vibration Control
2026 · Lanhe XU, Julien Brocail, et al. · EURODYN ...
PDF
Tuneable vibration control of beams using granular multilayer composite
2024 · Antoine FAULCONNIER, Stéphane JOB, et al. · NOISE-CON proceedings
Modèle effectif hystérétique de milieux granulaires cisaillés
2022 · Faulconnier, Antoine, Job, Stéphane, et al. · HAL
Dynamique non-linéaire d’un modèle réduit de milieux granulaires cisaillés
2022 · Faulconnier, Antoine, Job, Stéphane, et al. · HAL
Corrigendum to “Identification of the flexural stiffness parameters of an orthotropic plate from the local dynamic equilibrium without a priori knowledge of the principal directions” [J. Sound Vib. 404 (2017) 31–46]
2018 · Frédéric Ablitzer, Charles Pézerat, et al. · Journal of Sound and Vibration
Formation of band gaps in thin plate with a periodic array of resonators
2015 · Sahar Zouari, Jean-Michel Génevaux, et al. · HAL
Wave propagation in phononic crystal composites plates
2015 · Zouari, Sahar, Genevaux, Jean, Michel, et al. · HAL
Evolution of Dynamic Recrystallization of AISI-1045 Steel under Critical Friction Conditions
2014 · Kevin Le Mercier, Michel Watremez, et al. · Advanced materials research
Identification of Friction Law to Model Orthogonal Cutting
2014 · Yannick Senecaut, Michel Watremez, et al. · Key engineering materials
New Approach of Frictional Behaviour for Modelling of High Speed Machining
2011 · M. Watremez, L. Dubar, et al. · AIP conference proceedings
Sensitive analysis of a finite element model of orthogonal cutting
2011 · J. Brocail, M. Watremez, et al. · AIP conference proceedings
Friction analysis at tool-chip interface to high speed machining
2009 · BROCAIL, Julien, DUBAR, Laurent · OpenGrey (Institut de l'Information Scientifique et Technique)
Works count: 26
Citation count: 234
H-index: 7
I10-index: 4
Year
Topic
Type