Get started
Author

M. Sugavaneswaran

Observed names: M, Sugavaneswaran; Saha, Somnath; Nayak, Utkarsh; Parasuraman, Swaminathan; Nair, Nitheesh M; Kumar, Prasanna, Manivannan Sugavaneswaran, Sugavaneswaran M., Sugavaneswaran Manivannan
ORCID: 0000-0002-8137-5888
Observed ORCID: 0000-0002-8137-5888
OpenAlex ID: A5037591146
Modelling for randomly oriented multi material additive manufacturing component and its fabrication
2013 · M. Sugavaneswaran, G. Arumaikkannu · Materials & Design (1980-2015) · 106
Vapour polishing of fused deposition modelling (FDM) parts: a critical review of different techniques, and subsequent surface finish and mechanical properties of the post-processed 3D-printed parts
2023 · Amal Mathew, S. Ram Kishore, et al. · Progress in Additive Manufacturing · 77
PDF
Analytical and experimental investigation on elastic modulus of reinforced additive manufactured structure
2014 · M. Sugavaneswaran, G. Arumaikkannu · Materials & Design (1980-2015) · 73
Enhancement of surface characteristics of direct metal laser sintered stainless steel 316L by shot peening
2018 · M. Sugavaneswaran, A. Vinoth Jebaraj, et al. · Surfaces and Interfaces · 67
An innovative method of ocular prosthesis fabrication by bio-CAD and rapid 3-D printing technology: A pilot study
2017 · Md. Shahid Alam, M. Sugavaneswaran, et al. · Orbit · 65
Influence of Shot Peening on Residual Stress Distribution and Corrosion Resistance of Additive Manufactured Stainless Steel AISI 316L
2019 · A. Vinoth Jebaraj, M. Sugavaneswaran · Transactions of the Indian Institute of Metals · 29
Influence of Vapour Smoothing Process Parameters on Fused Deposition Modelling Parts Surface Roughness at Different Build Orientation
2020 · A. John Rajan, M. Sugavaneswaran, et al. · Materials Today Proceedings · 22
Influence of γ-alumina coating on surface properties of direct metal laser sintered 316L stainless steel
2019 · G. Sathish Sharma, M. Sugavaneswaran, et al. · Ceramics International · 22
Effect of electroplating on surface roughness and dimension of FDM parts at various build orientations
2019 · M. Sugavaneswaran, Prince Thomas, et al. · FME Transaction · 19
PDF
Metal bellow hydroforming using additive manufactured die: a case study
2019 · Prithvirajan R., Sugavaneswaran M., et al. · Rapid Prototyping Journal · 17
Effect of Cryogenic Treatment on the Wear Behavior of Additive Manufactured 316L Stainless Steel
2019 · M. Sugavaneswaran, A. Kulkarni · Tribology in Industry · 17
PDF
Investigation on Mechanical Properties of Additive Manufactured Hybrid Auxetic Structure
2022 · Santosh S. Bagewadi, M. Sugavaneswaran, et al. · Journal of Materials Engineering and Performance · 13
Design and validation of additive manufactured catalytic converter for the control of regulated and unregulated emissions of a gasohol fuelled spark ignition engine
2021 · G. Sathish Sharma, M. Sugavaneswaran, et al. · Fuel · 11
A multi-criteria decision making method for vapor smoothening fused deposition modelling part
2021 · Sugavaneswaran M., Prashanthi B., et al. · Rapid Prototyping Journal · 11
Design and Development of Hot Vapour Polishing System and Optimization of It’s Process Parameters for FDM Printed Parts
2022 · Sunish Ram Kishore, Amal Mathew, et al. · Tribology in Industry · 10
PDF
An overview of additive manufacturing technologies for musical wind instruments
2021 · Ajith Damodaran, M. Sugavaneswaran, et al. · SN Applied Sciences · 10
PDF
Design of Functional Gradient Porous Structure and its Fabrication using DMLS Process
2020 · A. Suresh Babu, M. Jaivignesh, et al. · Materials Today Proceedings · 10
Design of Robot Gripper with Topology Optimization and Its Fabrication Using Additive Manufacturing
2019 · M. Sugavaneswaran, N. Rajesh, et al. · Lecture notes on multidisciplinary industrial engineering · 9
Additive manufactured multi-material structure with directional specific mechanical properties based upon classical lamination theory
2018 · Sugavaneswaran M., Arumaikkannu G. · Rapid Prototyping Journal · 9
A study on the out-of-plane behavior of auxetic and hybrid auxetic structures
2025 · Santosh S. Bagewadi, Ranjeet Kumar Bhagchandani, et al. · Progress in Additive Manufacturing · 8
Compression behavior of Functionally Graded Cellular Materials fabricated with FDM
2020 · R.V. Duraibabu, R. Prithvirajan, et al. · Materials Today Proceedings · 8
NOx reduction in IC engines through after treatment catalytic converter
2022 · G. Sathish Sharma, M. Sugavaneswaran, et al. · Elsevier eBooks · 7
Modelling of Functional Gradient Porous Structure and its Fabrication using Additive Manufacturing Process
2018 · A. Suresh Babu, K.M. Binish, et al. · Materials Today Proceedings · 3
Study of effect on machinability by hybrid abrasive materials in AWJM
2021 · Wasif Mukaddam, Arjun Ramchandran, et al. · AIP conference proceedings · 2
An Experimental Investigation on Regulated and Unregulated Emissions of a Gasohol Fueled SI Engine with a Novel Three Way Catalytic Converter
2020 · Sathish Sharma Gunasekaran, Sugavaneswaran Manivannan, et al. · Journal Européen des Systèmes Automatisés · 2
PDF
Works count: 36
Citation count: 631
H-index: 12
I10-index: 17
Year
Topic
Type