Get started
Author

Ahmed Maati

Observed names: A. Maati, AHMED MAATI, Ahmed, Maati, Maati Ahmed, Maati, Ahmed
ORCID: 0000-0002-5069-1458
Observed ORCID: 0000-0002-5069-1458
OpenAlex ID: A5039174934
Constitutive modelling effect on the numerical prediction of springback due to a stretch-bending test applied on titanium T40 alloy
2015 · A. Maati, L. Tabourot, et al. · Archives of Civil and Mechanical Engineering · 8
Numerical Study of the Impact of Constitutive Modelling on the Evolution of Necking in the Case of a Tensile Test on C68 Grade Steel
2014 · Laurent Tabourot, Pascale Balland, et al. · Key engineering materials · 8
Influence of the material microstructural properties on a 3-point bending test
2020 · Ahmed Maati, Laurent Tabourot, et al. · Mechanics & Industry · 6
PDF
Numerical Simulation of Asymmetric Composite Patch Repair for Fatigue Damaged Aluminum Plate
2023 · Belaid Salim, Babaghayou Meriam Imane, et al. · Revue des composites et des matériaux avancés · 4
PDF
Experimental characterization of the Heat Affected Zone (HAZ) properties of 100Cr6 steel joined by rotary friction welding method
2017 · Demouche Mourad, Ouakdi Hedj, et al. · Mathematical Modelling and Engineering Problems · 4
PDF
Effects of coating, holding force, stretching height, yield stress, and surface roughness on springback of steel in the V-stretch bending test
2022 · Imene Abdedaim, Elhadj Ouakdi, et al. · Materials Testing · 3
Thermal aging and catalyst concentration effects on thermo-dynamical and mechanical properties of a polyester fiberglass composite
2021 · Belaid Salim, Salem Fouad Chabira, et al. · Metallurgical and Materials Engineering · 2
PDF
Modelling of the thermomechanical behaviour of FCC metals under various conditions
2018 · AHMED MAATI, EL HADJ OUAKDI, et al. · Annales de Chimie Science des Matériaux · 2
Modélisation du comportement élasto-plastique des tôles par un modèle compartimenté
2013 · Tabourot, Laurent, Balland, Pascale, et al. · HAL · 2
Experimental and numerical identification of the heat affected zone using digital image correlation and finite element method
2025 · Ameur Mechraoui, HadjAissa Benhorma, et al. · The International Journal of Advanced Manufacturing Technology · 1
A Novel Constitutive Modelling for Spring Back Prediction in Sheet Metal Forming Processes
2019 · Ahmed Maati, Laurent Tabourot, et al. · Lecture notes in mechanical engineering · 1
Numerical study of the impact of constitutive modelling on the evolution of necking in the case of a tensile test on C68 grade steel.
2014 · Tabourot, Laurent, Balland, Pascale, et al. · HAL · 1
Numerical Simulation of Springback during an Operation of V-Bending, Application to Titanium and Aluminum Sheets
2013 · Ahmed Maati, Virginie Pouzols, et al. · Advanced materials research · 1
A contribution to the modelling of creep behaviour of FCC metals
2021 · Ahmed Maati, El Hadj Ouakdi, et al. · Comptes Rendus Mécanique
PDF
Influence of the material microstructural properties on a 3 point bending test
2019 · Ahmed, Maati, Tabourot, Laurent, et al. · HAL
Strain analysis during tensile test using digital image correlation (DIC)
2018 · Ahmed, Maati, Belaid, Salim, et al. · HAL
A new constitutive modelling for springback prediction in sheet metal forming processes
2017 · Ahmed, Maati, Balland, Pascale, et al. · HAL
Analyse des propriétés mécaniques d’un composite vieilli par la méthode de corrélation d’images
2017 · Belaid, Salim, Chabira, S.F, et al. · HAL
Influence of heterogeneities and of their distribution on the elastoplastic behaviour of metals,
2015 · Tabourot, Laurent, Maati, Ahmed, et al. · HAL
Works count: 19
Citation count: 43
H-index: 4
I10-index:
Year
Topic
Type