Get started
Author

Philippus Stephan Heyns

Observed names: Heyns, P. S., Heyns, P. Stephan, Heyns, Philippus S., Heyns, Stephan, P Heyns, P S Heyns, P Stephan Heyns, P. S. HEYNS, P. S. Heyns, P. Stephan Heyns, P. Stephan  Heyns, P.S Heyns, P.S. HEYNS, P.S. Heyns, P. Stephan Heyns, PS Heyns, Philippus Heyns, Philippus S. Heyns, Philippus Stephanus Heyns, S.P. Heyns, Stephan Heyns, Stephan P. Heyns, Stephan Philippus Heyns
ORCID: 0000-0002-6164-9490
Observed ORCID: 0000-0002-6164-9490
OpenAlex ID: A5040167578
An integrated Gaussian process regression for prediction of remaining useful life of slow speed bearings based on acoustic emission
2016 · S.A. Aye, P.S. Heyns · Mechanical Systems and Signal Processing · 209
Development of a tool wear-monitoring system for hard turning
2003 · C. Scheffer, H. Kratz, et al. · International Journal of Machine Tools and Manufacture · 160
Using Vibration Monitoring for Local Fault Detection on Gears Operating Under Fluctuating Load Conditions
2002 · C.J. STANDER, P.S. HEYNS, et al. · Mechanical Systems and Signal Processing · 158
Wear Monitoring in Turning Operations Using Vibration and Strain Measurements
2001 · C. SCHEFFER, P.S. HEYNS · Mechanical Systems and Signal Processing · 142
Accuracy evaluation of sub-pixel structural vibration measurements through optical flow analysis of a video sequence
2016 · D.H. Diamond, P.S. Heyns, et al. · Measurement · 119
Reconstruction of road defects and road roughness classification using vehicle responses with artificial neural networks simulation
2009 · H.M. Ngwangwa, P.S. Heyns, et al. · Journal of Terramechanics · 119
A tacholess order tracking methodology based on a probabilistic approach to incorporate angular acceleration information into the maxima tracking process
2017 · S. Schmidt, P.S. Heyns, et al. · Mechanical Systems and Signal Processing · 114
Instantaneous angular speed monitoring of gearboxes under non-cyclic stationary load conditions
2004 · C.J. Stander, P.S. Heyns · Mechanical Systems and Signal Processing · 109
RETRACTED ARTICLE: Thermal analysis of porous fins enclosure with the comparison of analytical and numerical methods
2019 · S. Hoseinzadeh, P. S. Heyns, et al. · Journal of Thermal Analysis and Calorimetry · 98
A threshold self-setting condition monitoring scheme for wind turbine generator bearings based on deep convolutional generative adversarial networks
2020 · Peng Chen, Yu Li, et al. · Measurement · 95
Application of computed order tracking, Vold–Kalman filtering and EMD in rotating machine vibration
2010 · K.S. Wang, P.S. Heyns · Mechanical Systems and Signal Processing · 95
Thermo-structural fatigue and lifetime analysis of a heat exchanger as a feedwater heater in power plant
2020 · Siamak Hoseinzadeh, P. Stephan Heyns · Engineering Failure Analysis · 90
An industrial tool wear monitoring system for interrupted turning
2003 · C. Scheffer, P.S. Heyns · Mechanical Systems and Signal Processing · 84
A time series model-based method for gear tooth crack detection and severity assessment under random speed variation
2021 · Yuejian Chen, Stephan Schmidt, et al. · Mechanical Systems and Signal Processing · 80
PDF
Reconstruction of road defects and road roughness classification using Artificial Neural Networks simulation and vehicle dynamic responses: Application to experimental data
2014 · H.M. Ngwangwa, P.S. Heyns, et al. · Journal of Terramechanics · 78
Exergoeconomic analysis and optimization of reverse osmosis desalination integrated with geothermal energy
2020 · Siamak Hoseinzadeh, Roya Yargholi, et al. · Environmental Progress & Sustainable Energy · 75
Vibration isolation of a mounted engine through optimization
1995 · J.A Snyman, P.S Heyns, et al. · Mechanism and Machine Theory · 72
A stochastic hybrid blade tip timing approach for the identification and classification of turbomachine blade damage
2018 · R.G. Du Toit, D.H. Diamond, et al. · Mechanical Systems and Signal Processing · 69
Machine and component residual life estimation through the application of neural networks
2008 · M.A. Herzog, T. Marwala, et al. · Reliability Engineering & System Safety · 63
PDF
Numerical investigation of heat transfer of laminar and turbulent pulsating Al2O3/water nanofluid flow
2019 · S. Hoseinzadeh, P.S. Heyns, et al. · International Journal of Numerical Methods for Heat &amp Fluid Flow · 61
PDF
Energetic and exergetic analysis of evaporation desalination system integrated with mechanical vapor recompression circulation
2019 · Hamed Kariman, Siamak Hoseinzadeh, et al. · Case Studies in Thermal Engineering · 60
PDF
Energy and economic analysis of evaporative vacuum easy desalination system with brine tank
2019 · H. Kariman, S. Hoseinzadeh, et al. · Journal of Thermal Analysis and Calorimetry · 59
Improved Blade Tip Timing measurements during transient conditions using a State Space Model
2018 · D.H. Diamond, P.S. Heyns, et al. · Mechanical Systems and Signal Processing · 59
Tool wear monitoring and selection of optimum cutting conditions with progressive tool wear effect and input uncertainties
2009 · Sukhomay Pal, P. Stephan Heyns, et al. · Journal of Intelligent Manufacturing · 59
Advanced Energy, Exergy, and Environmental (3E) Analyses and Optimization of a Coal-Fired 400 MW Thermal Power Plant
2020 · Siamak Hoseinzadeh, P. Stephan Heyns · Journal of Energy Resources Technology · 58
Works count: 213
Citation count: 4,801
H-index: 41
I10-index: 109
Year
Topic
Type