Get started
Author

N. Mesrati

Observed names: Mesrati Nadir, Mesrati, N, Mesrati, N., Mesrati, Nadir, Mesratı, Nadir, N Mesrati, Nadir Mesrati, Nadir Mesrati
OpenAlex ID: A5041231111
Surface morphology and wettability of sandblasted PEEK and its composites
2013 · R. Ourahmoune, M. Salvia, et al. · Scanning · 94
Study of SiC–nickel alloy bonding for high temperature applications
2008 · M.L. Hattali, S. Valette, et al. · Journal of the European Ceramic Society · 64
Experimental study of the thermo-mechanical behaviour of alumina-silicate refractory materials based on a mixture of Algerian kaolinitic clays
2011 · B. Amrane, E. Ouedraogo, et al. · Ceramics International · 56
Relationships between microstructure, mechanical and dielectric properties of different alumina materials
2009 · L. Haddour, N. Mesrati, et al. · Journal of the European Ceramic Society · 40
Adhesion and residual stresses determination of thermally sprayed molybdenum on steel
2003 · M. Laribi, N. Mesrati, et al. · Surface and Coatings Technology · 38
Effect of thermal residual stresses on the strength for both alumina/Ni/alumina and alumina/Ni/nickel alloy bimaterials
2009 · M. L. Hattali, S. Valette, et al. · Journal of Materials Science · 21
Interfacial behavior on Al2O3/HAYNES® 214™ joints fabricated by solid state bonding technique with Ni or Cu–Ni–Cu interlayers
2012 · M.L. Hattali, S. Valette, et al. · Journal of the European Ceramic Society · 15
Interfacial fracture toughness measurement in both steady state and transient regimes using four-point bending test
2020 · M. E. M. Zebar, M. L. Hattali, et al. · International Journal of Fracture · 13
Characterization of thermal fatigue damage of thermal barrier produced by atmospheric plasma spraying
2004 · N. Mesrati, Q. Saif, et al. · Surface and Coatings Technology · 13
Metallurgical Characterization and Determination of Residual Stresses of Coatings Formed by Thermal Spraying
2003 · M. Laribi, A.B. Vannes, et al. · Journal of Thermal Spray Technology · 13
Thermal Spraying and Adhesion of Oxides onto Graphite
2000 · N. Mesrati, H. Ajhrourh, et al. · Journal of Thermal Spray Technology · 13
Effect of metakaolin as partially cement replacement on the compressive strength of standard mortars
2021 · Naïma Fezzioui, Belaid Amrane, et al. · Revista Romana de Inginerie Civila/Romanian Journal of Civil Engineering · 12
PDF
Electric charge trapping, residual stresses and properties of ceramics after metal/ceramics bonding
2011 · M.L. Hattali, N. Mesrati, et al. · Journal of the European Ceramic Society · 12
Effect of nanosilica additive particles on both friction and wear performance of mild steel/CuSn/SnBi multimaterial system
2015 · H. Ait-Sadi, L. Hemmouche, et al. · Tribology International · 10
PDF
Calculation and experimental determinations of the residual stress distribution in alumina/Ni/alumina and alumina/Ni/nickel alloy systems
2010 · M. L. Hattali, S. Valette, et al. · Journal of Materials Science · 10
Influence of zinc (II) ion concentration on Ni–Zn–P coatings deposited onto aluminum and their corrosion behavior
2014 · Karima Chouchane, Alexandra Levesque, et al. · International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) · 8
Effect of NiAl Bond Layer on the Wear Resistance of an Austenitic Stainless Steel Coating Obtained by Arc Spray Process
2023 · Abdallah Sadki, Rassim Younes, et al. · SAE International Journal of Materials and Manufacturing · 7
Characterization and Modeling of the Mechanical Behavior of Aeronautical Alloy Based Composite
2016 · A. Sadki, M.L. Hattali, et al. · Universal Journal of Chemistry · 6
PDF
Détermination expérimentale des contraintes résiduelles au sein de structures élaborées par projection thermique
2001 · M. Laribi, N. Mesrati, et al. · Matériaux & Techniques · 6
Effect of silicon content on microstructure and mechanical properties of AlSi alloy coating obtained by physical vapour deposition
2024 · E. Saoudi, R. Younes, et al. · Transactions of the IMF · 5
Optimization of fabrication parameters of Alumina/Nickel alloy joints for high-temperature application
2009 · M L Hattali, S Terekhina, et al. · IOP Conference Series Materials Science and Engineering · 5
PDF
Thermal Spraying on Graphite
1998 · N. Mesrati, H. Ajhrourh, et al. · Thermal spray · 3
Rôle du zinc et de l'argent sur l'adhérence de zircone projetée sur un alliage aluminium-silicium 12 %
1993 · N. Mesrati, Du. Nguyen, et al. · Revue de Métallurgie · 3
Assessment of non-uniform residual stress field of the thermal sprayed stainless steel coatings on aluminium substrates by the integral hole drilling method
2020 · Harouche Mohamed Karim, Hattali Lamine, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 2
Improvement of the corrosion behavior of aluminum alloy 6061-T6 with yttrium and lanthanum conversion coatings
2018 · D. Bekhiti, J. Creus, et al. · Materiali in tehnologije · 2
PDF
Works count: 45
Citation count: 476
H-index: 12
I10-index: 15
Year
Topic
Type