Get started
Author

Arumugam Thanikasalam

Observed names: A Thanikasalam, A. Thanikasalam, Dr. A Thanikasalam, Thanikasalam A
Institution: AMET University
Observed institution: AMET University
ORCID: 0000-0003-3876-5036
Observed ORCID: 0000-0003-3876-5036
OpenAlex ID: A5042338513
Extraction of novel biosilica from finger millet husk and its coconut rachilla-reinforced epoxy biocomposite: mechanical, thermal, and hydrophobic behaviour
2022 · P. Sivamurugan, R. Selvam, et al. · Biomass Conversion and Biorefinery · 39
Parametric optimization of deep-hole drilling on AISI 1045 steel and online tool condition monitoring using an accelerometer
2018 · N Arunkumar, A Thanikasalam, et al. · Materials and Manufacturing Processes · 22
Experimental analysis on drilling of super duplex stainless steel 2507 (SDSS 2507) using cryogenic LCO2 and MQL process
2022 · T. Kanagaraju, L. Ganesh Babu, et al. · Biomass Conversion and Biorefinery · 19
Thermal Studies on Palm Fibre and Rice Husk Ash Ash-Reinforced Epoxy Resin Composite
2024 · N. Senthilkumar, A. Thanikasalam, et al. · Sustainable civil infrastructures · 9
The Influence of Chemically Treated Hemp Fibre on the Mechanical Behavior and Thermal Properties of Polylactic Acid Made with FDM
2022 · N. I. Haroon Rashid, R. Meenakshi Reddy, et al. · Advances in Materials Science and Engineering · 9
PDF
Study on the process parameters of delamination on novel madar/ramie fibers reinforced MgO nanoparticles blended epoxy matrix composite
2024 · Vinayagam Mohanavel, A. Thanikasalam, et al. · Results in Engineering · 8
Thermo-gravimetric analysis on stainless steel mesh wire/glass fibre strengthened epoxy matrix hybrid composite laminate
2023 · N. Karunagaran, T. Shaafi, et al. · AIP conference proceedings · 8
Multiple response optimization of machining parameters in turning nimonic C263 using TOPSIS approach
2021 · S. Lakshmana Kumar, M. Subburaj, et al. · Materials Today Proceedings · 5
Green Synthesis and Characterization of Zinc Oxide Nanoparticles using Ficus racemosa Leaf Extract and Evaluation of their Antibacterial, Photocatalytic and Phytotoxic Properties
2026 · M Hariharan, A Thanikasalam, et al. · International Journal of Advanced Science and Engineering · 4
PDF
Mechanical Characterization of Epoxy-Nanoclay-Kenaf Fiber Polymer Composites
2024 · N. Senthilkumar, A. Thanikasalam, et al. · Sustainable civil infrastructures · 4
Synergistic influence of ZrO₂ and nano hydroxyapatite on flame retardancy, thermo-mechanical performance of borassus flabellifer fruit fiber based epoxy hybrid composites
2026 · Ravindra Pratap Singh, Vinod Kumar Naidu Pamuluri, et al. · Polymer Bulletin · 3
Nanobiochar (NBc) from agro-waste for heavy metal sequestration: Nanofabrication, modification, and sustainable environment applications
2026 · Vasamsetti Sai Sruthi, J. Aravind Kumar, et al. · Biomass and Bioenergy · 3
Effect of bidirectional fiber incorporation on tensile properties and drilling parameter optimization of cellulose bio fibers and glass fiber thermoset composites
2025 · R. Meenakshi Reddy, A. Thanikasalam, et al. · Results in Engineering · 3
Comparison of Al2O3-Reinforced Sintered and Extruded AA2014 Nano-Hybrid Composite Particle Size Effects on Mechanical and Metallurgical Characteristics
2022 · Ramesh B, Srinivas Vempati, et al. · ECS Transactions · 2
Friction stir welding of an AZ31-silicon nitride magnesium composite: finite element simulation approach
2026 · Pon Azhagiri, M. Kumaresan, et al. · Interactions · 1
Deciphering the phytoconstituents of marine Amphiroa fragilissima: A comprehensive GC-MS, structural, spectroscopic, topological, and biological insights
2026 · Renganathan Vijayan, Chinnadurai Veeramani, et al. · Next Materials · 1
Performance evaluation of AZ61/nZnO composite: insights into squeeze casting
2026 · Jasgurpreet Singh Chohan, Hrushikesh Sarangi, et al. · Interactions · 1
Ultrasound-assisted microwave carbonization of neem biomass for fluorescent carbon dots in integrated crop growth and pest management
2026 · Yuvaraj Tamilselvi, Thirunavukkarasu Rubasri, et al. · Carbon Trends · 1
Morphological and Tribological Properties of Hemp Fiber strengthened PLA Composites Incorporating Seashell Bio-Filler
2025 · P. Chandramohan, P. Vasanthkumar, et al. · Journal of Engineering Science and Technology Review · 1
PDF
Optimization of drilling process parameters on epoxy matrix hybrid composite laminate reinforced with glass fibre/stainless steel wire mesh
2023 · N. Karunagaran, C. Thiagarajan, et al. · AIP conference proceedings · 1
Effect of silicon carbide on wear characteristics of fibre reinforced polymer matrix composites
2022 · K. Arul, T. Michelraj, et al. · AIP conference proceedings · 1
Studies on the effects of bluff body materials in scramjet applications
2021 · A. Shankar, Arul Kulandaivel, et al. · Materials Today Proceedings · 1
Dry sliding wear behaviour of Mg AZ91/ZrN composite using topsis approach
2026 · A. Thanikasalam, Rajesh Kumar, et al. · Interactions
Fabrication and characterization of silver nanoparticle-embedded PVA–PGA Composite membranes for wound healing applications
2026 · M. Vadivel, Karthik S. Ajjampurshettar, et al. · Interactions
Multi-response optimization and machine learning prediction of Passiflora foetida fibre–orange peel biocarbon polypropylene composites
2026 · Karthik S Ajjampurshettar, Dinesh Wankhede, et al. · Interactions
Works count: 49
Citation count: 152
H-index: 7
I10-index: 3
Year
Topic
Type