Get started
Author

Andrew C. Long

Observed names: A C LONG, A C Long, A LONG, A. C. Long, A. Long, A.C Long, A.C. Long, A.C. Long,, AC Long, Andrew C Long, Andrew Long, Long, A.C, Long, Andrew, Long, Andrew C.
ORCID: 0000-0003-3761-7103
Observed ORCID: 0000-0003-3761-7103
OpenAlex ID: A5042376916
Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results
2008 · J. Cao, R. Akkerman, et al. · Composites Part A Applied Science and Manufacturing · 656
Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experiments
2003 · P. Harrison, M.J. Clifford, et al. · Composites Science and Technology · 341
Experimental determination of the permeability of textiles: A benchmark exercise
2011 · R. Arbter, J.M. Beraud, et al. · Composites Part A Applied Science and Manufacturing · 307
Design and manufacture of textile composites
2005 · A. C. Long · Woodhead Publishing Limited eBooks · 288
Liquid Moulding Technologies
1997 · C D Rudd, A C Long, et al. · Woodhead Publishing Limited eBooks · 271
Mechanical modelling of 3D woven composites considering realistic unit cell geometry
2014 · S.D. Green, M.Y. Matveev, et al. · Composite Structures · 270
PDF
Experimental determination of the permeability of engineering textiles: Benchmark II
2014 · N. Vernet, E. Ruiz, et al. · Composites Part A Applied Science and Manufacturing · 268
PDF
Curing of composite components by ultraviolet radiation: A review
2006 · A. Endruweit, M. S. Johnson, et al. · Polymer Composites · 265
Electromagnetic shielding effectiveness of carbon fibre reinforced composites
2019 · D. Munalli, G. Dimitrakis, et al. · Composites Part B Engineering · 255
Uncertainty in the manufacturing of fibrous thermosetting composites: A review
2013 · T.S. Mesogitis, A.A. Skordos, et al. · Composites Part A Applied Science and Manufacturing · 215
Analysis of the vacuum infusion moulding process: I. Analytical formulation
2005 · N.C. Correia, F. Robitaille, et al. · Composites Part A Applied Science and Manufacturing · 211
Modelling and Simulating Textile Structures Using TexGen
2011 · Hua Lin, Louise P Brown, et al. · Advanced materials research · 200
Numerical modelling of 3D woven preform deformations
2013 · S.D. Green, A.C. Long, et al. · Composite Structures · 192
Finite element forming simulation for non-crimp fabrics using a non-orthogonal constitutive equation
2005 · Woong-Ryeol Yu, Philip Harrison, et al. · Composites Part A Applied Science and Manufacturing · 141
A micromechanical study of residual stress and its effect on transverse failure in polymer–matrix composites
2005 · L.G. Zhao, N.A. Warrior, et al. · International Journal of Solids and Structures · 140
Predictive modelling for optimization of textile composite forming
2007 · H. Lin, J. Wang, et al. · Composites Science and Technology · 139
Compression moulding of glass and polypropylene composites for optimised macro- and micro- mechanical properties—1 commingled glass and polypropylene
1998 · M.D. Wakeman, T.A. Cain, et al. · Composites Science and Technology · 138
Geometrical modelling of 3D woven reinforcements for polymer composites: Prediction of fabric permeability and composite mechanical properties
2013 · Xuesen Zeng, Louise P. Brown, et al. · Composites Part A Applied Science and Manufacturing · 132
Automated geometric modelling of textile structures
2012 · Hua Lin, Xiesheng Zeng, et al. · Textile Research Journal · 123
A Simulation of Reinforcement Deformation during the Production of Preforms for Liquid Moulding Processes
1994 · A C Long, C D Rudd · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 119
Modelling the geometry of textile reinforcements for composites: TexGen
2011 · A.C. Long, L.P. Brown · Elsevier eBooks · 117
In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise
2019 · D. May, A. Aktas, et al. · Composites Part A Applied Science and Manufacturing · 115
PDF
Finite element modelling of fabric compression
2008 · Hua Lin, Martin Sherburn, et al. · Modelling and Simulation in Materials Science and Engineering · 105
A thermo-viscoelastic analysis of process-induced residual stress in fibre-reinforced polymer–matrix composites
2006 · L.G. Zhao, N.A. Warrior, et al. · Materials Science and Engineering A · 101
Comparisons of novel and efficient approaches for permeability prediction based on the fabric architecture
2005 · C.C. Wong, A.C. Long, et al. · Composites Part A Applied Science and Manufacturing · 97
Works count: 247
Citation count: 9,334
H-index: 52
I10-index: 133
Year
Topic
Type