Get started
Author

Robert Collet

Observed names: Collet, R., Collet, Robert, R Collet, R. Collet, Robert Collet Rémy
Observed institutions: Centre National de la Recherche Scientifique, ParisTech, Arts et Métiers, Laboratoire Bourguignon des Matériaux et Procédés, Université Bourgogne Franche-Comté, HESAM Université, Université Henri Poincaré
ORCID: 0000-0001-8213-8959
Observed ORCID: 0000-0001-8213-8959
OpenAlex ID: A5043733730
A Method of Lathe Checks Measurement; SMOF device and its software
2009 · Bartosz Pałubicki, Rémy Marchal, et al. · European Journal of Wood and Wood Products · 51
PDF
Resistance of thermally modified ash (Fraxinus excelsior L.) wood under steam pressure against rot fungi, soil-inhabiting micro-organisms and termites
2016 · Kévin Candelier, Simon Hannouz, et al. · European Journal of Wood and Wood Products · 48
PDF
Evaluation of wood characteristics: Internal scanning of the material by microwaves
1987 · P. Martin, R. Collet, et al. · Wood Science and Technology · 48
Numerical study of the influence of veneer lathe checks on the elastic mechanical properties of laminated veneer lumber (LVL) made of beech
2014 · Guillaume Pot, Louis-Etienne Denaud, et al. · Holzforschung · 45
PDF
Improving strength grading of timber by grain angle measurement and mechanical modeling
2014 · Joffrey Viguier, Arnaud Jehl, et al. · Wood Material Science and Engineering · 44
PDF
Surface treatments of tools used in industrial wood machining
2005 · C. Labidi, R. Collet, et al. · Surface and Coatings Technology · 42
Automatic measurement of wood fiber orientation and knot detection using an optical system based on heating conduction
2015 · Vincent Daval, Guillaume Pot, et al. · Optics Express · 40
Effect of surface finishing such as sand-blasting and CrAlN hard coatings on the cutting edge's peeling tools’ wear resistance
2009 · C. Nouveau, C. Labidi, et al. · Wear · 35
PDF
Application of CrAlN coatings on carbide substrates in routing of MDF
2007 · C. Nouveau, C. Labidi, et al. · Wear · 35
PDF
Wood machining with a focus on French research in the last 50 years
2015 · Bernard Thibaut, Louis Denaud, et al. · Annals of Forest Science · 34
PDF
Assessment of bonding durability of CLT and glulam made from oak and mixed poplar-oak according to bonding pressure and glue type
2022 · Citra Yanto Ciki Purba, Guillaume Pot, et al. · Construction and Building Materials · 29
PDF
Utilization of temperature kinetics as a method to predict treatment intensity and corresponding treated wood quality: Durability and mechanical properties of thermally modified wood
2015 · K. Candelier, S. Hannouz, et al. · Maderas Ciencia y tecnología · 28
PDF
Prediction of Oak Wood Mechanical Properties Based on the Statistical Exploitation of Vibrational Response
2017 · Younes Faydi, Loic Brancheriau, et al. · BioResources · 23
PDF
Evaluation of the visual stress grading standard on French Spruce (Picea excelsa) and Douglas-fir (Pseudotsuga menziesii) sawn timber
2008 · Guillaume Roblot, Damien Coudegnat, et al. · Annals of Forest Science · 22
PDF
Influence of wood anatomy on fiber orientation measurement obtained by laser scanning on five European species
2020 · Benoît Besseau, Guillaume Pot, et al. · Journal of Wood Science · 21
PDF
Anti-fungal and anti-termite activity of extractives compounds from thermally modified ash woods
2020 · Kévin Candelier, Marie-France Thévenon, et al. · Maderas Ciencia y tecnología · 21
PDF
Effect of grain direction on cutting forces and chip geometry during green beech wood machining
2018 · Rémi Curti, Bertrand Marcon, et al. · BioResources · 16
PDF
Mechanical Characterization of Heat-treated Ash Wood in Relation With Structural Timber Standards
2015 · Hannouz, Simon, Collet, Robert, et al. · HAL · 16
PDF
Analysis of chip formation mechanisms and modelling of slabber process
2014 · Renaud Pfeiffer, Robert Collet, et al. · Wood Science and Technology · 16
PDF
Traceability and quality assessment of Douglas fir (Pseudotsuga menziesii (Mirb.) Franco) logs: the TreeTrace_Douglas database
2022 · Fleur Longuetaud, Guillaume Pot, et al. · Annals of Forest Science · 15
PDF
Modeling the Influence of Knots on Douglas-Fir Veneer Fiber Orientation
2020 · Rémy Frayssinhes, Stéphane Girardon, et al. · Fibers · 11
PDF
Experimental study of locally loaded timber in compression perpendicular to the grain
2011 · Laurent Bleron, Louis-Etienne Denaud, et al. · European Journal of Environmental and Civil engineering · 10
PDF
Heat treatment of poplar plywood: modifications in physical, mechanical and durability properties
2023 · B Marcon, J Viguier, et al. · iForest - Biogeosciences and Forestry · 8
PDF
Panel Shear of Plywood in Structural Sizes - Assessment Improvement Using Digital Image Correlation
2021 · J. Viguier, B. Marcon, et al. · Experimental Techniques · 4
PDF
Wood fiber orientation assessment based on punctual laser beam excitation: A preliminary study
2016 · M. Belkacemi, J. Massich, et al. · International Conference on Quantitative InfraRed Thermography (QIRT) · 4
PDF
Works count: 65
Citation count: 678
H-index: 16
I10-index: 22
Year
Topic
Type