Get started
Author

V. Prabhu Raja

Observed names: V Prabhu Raja, V.Prabhu Raja, V.Prabhu Raja,, Venugopal Prabhu Raja
Observed institution: PSG College of Technology
ORCID: 0000-0002-6273-7900
Observed ORCIDs: 0000-0002-6273-7900, 0000-0002-8825-4712
OpenAlex ID: A5043822220
Establishment of structural similitude for elastic models and validation of scaling laws
2013 · Murugan Ramu, V. Prabhu Raja, et al. · KSCE Journal of Civil Engineering · 96
Failure analysis of shear pins in wind turbine generator
2010 · S. Sankar, M. Nataraj, et al. · Engineering Failure Analysis · 26
Prediction of Temperature Distribution of the Spindle System by Proposed Finite Volume and Element Method
2019 · V. Prabhu Raja, R. Sathiya Moorthy · Arabian Journal for Science and Engineering · 19
Prediction of tool wear in high speed machining using acoustic emission technique and neural network
2006 · B. Giriraj, V. Prabhu Raja, et al. · Indian Journal of Engineering and Materials Sciences · 15
An Improved Analytical Model for Prediction of Heat Generation in Angular Contact Ball Bearing
2014 · R. Sathiya Moorthy, V. Prabhu Raja · Arabian Journal for Science and Engineering · 13
Prediction of transient thermo-mechanical behavior of the headstock assembly of a CNC lathe
2014 · S. Ramesh Babu, V. Prabhu Raja, et al. · The International Journal of Advanced Manufacturing Technology · 11
Identification, development and testing of thermal error compensation model for a headstock assembly of CNC turning centre
2014 · Ramesh Babu, V.Prabhu Raja, et al. · International Journal of Engineering & Technology · 6
Analytical and numerical validation of the developed structural similitude for elastic models
2013 · V. Prabhu Raja, M. Ramu, et al. · 6
A strategy of investigation on the thermal behaviour of motorised spindles under high-speed machining
2006 · V. Prabhu Raja, P.R. Thyla, et al. · International Journal of Computer Applications in Technology · 6
A strategy for minimization of thermal error in headstock assembly of CNC lathe
2018 · V. Prabhu Raja, M. Thirumalaimuthukumaran, et al. · Machining Science and Technology · 5
Analysis of High Speed Spindle with a Double Helical Cooling Channel
2012 · R. Sathiya Moorthy, V. Prabhu Raja · 5
Comparison of geometry dependent resistance models with conventional models for estimation of effective thermal conductivity of two-phase materials
2010 · A. P. Senthil Kumar, V. Prabhu Raja, et al. · Heat and Mass Transfer · 5
Dynamics of High-speed Machining of Aerospace Structures using Finite-element Analysis
2002 · J. Kanchana, V. Prabhu Raja, et al. · Defence Science Journal · 5
Identification of stability lobes in high-speed machining of thin ribs
2010 · Pal Pandian P, K. Sakthimurugan, et al. · 4
Design Optimization of Complex Structures using Metamodels
2010 · M. Ramu, V. Prabhu Raja, et al. · Jordan Journal of Mechanical and Industrial Engineering · 4
Dynamic performance enhancement of machining center with epoxy granite base: Experiments and finite element simulations
2024 · P. Dhanabal, V. Prabhu Raja, et al. · Precision Engineering · 2
Enhancement of Static and Dynamic Characteristics on Micro-lathe Bed by the Use of Alternate Form Design and Composite Materials
2019 · N. Mahendrakumar, P. R. Thyla, et al. · Lecture notes on multidisciplinary industrial engineering · 2
Structural design optimization of roof slab of a pool type sodium cooled fast reactor
2016 · V Prabhu Raja, M Ramu, et al. · Advances in Engineering Software · 2
Influence of contact resistance and natural convection effects on non-dimensional effective thermal conductivity estimation of two-phase materials
2012 · P. Karthikeyan, S. Chidambara Raja, et al. · Heat and Mass Transfer · 2
Hexagonal Geometrical Inclusion to Estimate Effective Thermal Conductivity (ETC) of Porous System and Suspension system Including the Effect of Natural Convection
2012 · B. Selvakumar, V. Prabhu Raja, et al. · 2
Empirical Correlation of Various Inclusions on the Effect of Primary and Secondary Parameters for Estimation of Effective Thermal Conductivity (ETC) of Two Phase Materials
2012 · Senthil Kumar, P. Karthikeyan, et al. · 2
Indian and International Scenario on Research in Thermal Error Minimization in CNC Machine Tool
2011 · Sunilkumar S. Honnungar, V. Prabhu Raja, et al. · Applied Mechanics and Materials · 2
Comparison of hexagon and octagon cylinder models with conventional models for effective thermal conductivity estimation of suspension systems
2010 · A. P. Senthil Kumar, V. Prabhu Raja, et al. · Journal of Scientific & Industrial Research · 2
Adaptive control in high speed machining for improved surface finish
2008 · B. Giriraj, R. Gandhinadhan, et al. · Indian Journal of Engineering and Materials Sciences · 2
Multi-objective Topology Optimization of Steel Reinforcement for Epoxy Granite VMC Column
2022 · V. Arjun, A. Arun Thiyagarajan, et al. · Lecture notes in mechanical engineering · 1
Works count: 41
Citation count: 251
H-index: 6
I10-index: 6
Year
Topic
Type