Author

Boris Piotrowski

Observed names: B Piotrowski, B. Piotrowski, Boris Pitrowski, Boris Pittrowski, PIOTROWSKI, Boris, Piotrowski, B, Piotrowski, Boris

Institutions: Laboratoire d'Étude des Microstructures et de Mécanique des Matériaux, Université de Lorraine

Observed institutions: Centre National de la Recherche Scientifique, Arts et Métiers, Schlumberger (United States), Schlumberger (France), Laboratoire Procédés et Ingénierie en Mécanique et Matériaux, Laboratoire Énergies & Mécanique Théorique et Appliquée, Laboratoire d'Étude des Microstructures et de Mécanique des Matériaux, HESAM Université, École Nationale d'Ingénieurs de Metz, Université Paul Verlaine - Metz, Université de Lorraine

ORCID: 0000-0002-3361-1305

Observed ORCID: 0000-0002-3361-1305

OpenAlex ID: A5044047494

Three-dimensional FE2 method for the simulation of non-linear, rate-dependent response of composite structures

2018 · E. Tikarrouchine, G. Chatzigeorgiou, et al. · Composite Structures · 101

PDF

Numerical investigation of the effective mechanical properties and local stress distributions of TPMS-based and strut-based lattices for biomedical applications

2021 · Chrysoula Chatzigeorgiou, Boris Piotrowski, et al. · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · 89

Interaction of bone–dental implant with new ultra low modulus alloy using a numerical approach

2014 · B. Piotrowski, A.A. Baptista, et al. · Materials Science and Engineering C · 84

PDF

Architectural effect on 3D elastic properties and anisotropy of cubic lattice structures

2019 · P. Lohmuller, J. Favre, et al. · Materials & Design · 52

PDF

Parameter identification of a thermodynamic model for superelastic shape memory alloys using analytical calculation of the sensitivity matrix

2014 · F. Meraghni, Y. Chemisky, et al. · European Journal of Mechanics - A/Solids · 48

PDF

Modeling of niobium precipitates effect on the Ni47Ti44Nb9 Shape Memory Alloy behavior

2012 · B. Piotrowski, T. Ben Zineb, et al. · International Journal of Plasticity · 41

PDF

Consideration of SLM additive manufacturing supports on the stability of flexible structures in finish milling

2020 · P. Didier, G. Le Coz, et al. · Journal of Manufacturing Processes · 39

Stress Concentration and Mechanical Strength of Cubic Lattice Architectures

2018 · Paul Lohmuller, Julien Favre, et al. · Materials · 38

PDF

Roundrobin SMA modeling

2009 · P. Sittner, L. Heller, et al. · European Symposium on Martensitic Transformations (ESOMAT) · 38

PDF

A continuous crystallographic approach to generate cubic lattices and its effect on relative stiffness of architectured materials

2018 · Julie Favre, Paul Lohmuller, et al. · Additive manufacturing · 37

PDF

Finite Element Analysis of the Stress Field in Peri-Implant Bone: A Parametric Study of Influencing Parameters and Their Interactions for Multi-Objective Optimization

2020 · Paul Didier, Boris Piotrowski, et al. · Applied Sciences · 28

PDF

Mechanical stability of custom-made implants: Numerical study of anatomical device and low elastic Young's modulus alloy

2016 · P. Didier, B. Piotrowski, et al. · Materials Science and Engineering C · 25

PDF

A finite element–based numerical tool for Ni 47 Ti 44 Nb 9 SMA structures design: Application to tightening rings

2011 · B Piotrowski, T Ben Zineb, et al. · Journal of Intelligent Material Systems and Structures · 24

Numerical tool for SMA material simulation: application to composite structure design

2009 · Yves Chemisky, Arnaud Duval, et al. · Smart Materials and Structures · 20

PDF

Multiscale mechanical analysis for biomimetic implant design based on Triply Periodic Minimal Surfaces (TPMS) lattices: Application to partial replacement of femoral bone

2025 · Chrysoula Chatzigeorgiou, Boris Piotrowski, et al. · Results in Engineering · 18

Consideration of additive manufacturing supports for post-processing by end milling: a hybrid analytical–numerical model and experimental validation

2021 · P. Didier, G. Le Coz, et al. · Progress in Additive Manufacturing · 14

Multi-scale in situ mechanical investigation of the superelastic behavior of a Cu–Al–Be polycrystalline shape memory alloy

2022 · Y. El Hachi, S. Berveiller, et al. · Acta Materialia · 11

Mechanical properties of a nanoporous membrane used in implantable medical devices. Correlation between experimental characterization and 2D numerical simulation

2017 · F. Cristofari, B. Piotrowski, et al. · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · 11

PDF

Damping Capacity of Ti–Nb Shape Memory Alloys Evaluated Through DMA and Single-Impact Tests

2022 · W. Elmay, L. Peltier, et al. · Shape Memory and Superelasticity · 9

PDF

Contribution of computational model for assessment of heart tissue local stress caused by suture in LVAD implantation

2018 · A. Chalon, Julie Favre, et al. · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · 6

PDF

Experimental and numerical analysis of recovery stress in Ni47Ti44Nb9 shape memory alloys: application to tightening

2010 · Boris Piotrowski, Tarak Ben Zineb, et al. · Physics Procedia · 5

PDF

Roundrobin SMA modeling

2009 · Petr Šittner, Luděk Heller, et al. · Springer Link (Chiba Institute of Technology) · 5

PDF

Flip-chip technology at room temperature: A new design of microtube-based interconnect for improved mechanical and electrical properties

2024 · Cloé Desbordes, Raphaël Pesci, et al. · Sensors and Actuators A Physical · 4

PDF

Multilayer CdHgTe-based infrared detector: 2D/3D microtomography, synchrotron emission and finite element modelling with stress distribution at room temperature and 100 K

2019 · A.L. Lebaudy, R. Pesci, et al. · Materialia · 4