Author

Gianni Nicoletto

Observed names: G NICOLETTO, G Nicoletto, G. NICOLETTO, G. NICOLETTO,, G. Nicoletto, Gianni NICOLETTO, Nicoletto, Gianni (and others)

Institution: University of Parma

Observed institutions: University of Parma, University of Žilina, Virginia Tech, University of Bologna

ORCID: 0000-0001-9893-7616

Observed ORCID: 0000-0001-9893-7616

OpenAlex ID: A5044399520

Microstructure and mechanical properties of pearlitic gray cast iron

2007 · L. Collini, G. Nicoletto, et al. · Materials Science and Engineering A · 223

Characterization of microshrinkage casting defects of Al–Si alloys by X-ray computed tomography and metallography

2012 · Gianni Nicoletto, Radomila Konečná, et al. · International Journal of Fatigue · 154

Anisotropic high cycle fatigue behavior of Ti–6Al–4V obtained by powder bed laser fusion

2016 · Gianni Nicoletto · International Journal of Fatigue · 145

Long fatigue crack growth in Inconel 718 produced by selective laser melting

2016 · R. Konečná, L. Kunz, et al. · International Journal of Fatigue · 145

Surface roughness and directional fatigue behavior of as-built EBM and DMLS Ti6Al4V

2018 · G. Nicoletto, R. Konečná, et al. · International Journal of Fatigue · 109

Microstructure and directional fatigue behavior of Inconel 718 produced by selective laser melting

2016 · Radomila Konečná, Gianni Nicoletto, et al. · Procedia Structural Integrity · 107

Fatigue crack growth in bonded DCB specimens

2003 · A. Pirondi, G. Nicoletto · Engineering Fracture Mechanics · 96

X-ray computed tomography vs. metallography for pore sizing and fatigue of cast Al-alloys

2010 · Gianni Nicoletto, Giancarlo Anzelotti, et al. · Procedia Engineering · 90

PDF

Moiré interferometry determination of residual stresses in the presence of gradients

1991 · Gianni Nicoletto · Experimental Mechanics · 79

Directional and notch effects on the fatigue behavior of as-built DMLS Ti6Al4V

2017 · Gianni Nicoletto · International Journal of Fatigue · 74

Failure mechanisms in twill-weave laminates: FEM predictions vs. experiments

2004 · Gianni Nicoletto, Enrica Riva · Composites Part A Applied Science and Manufacturing · 70

Microstructure and fatigue performance of SLM-fabricated Ti6Al4V alloy after different stress-relief heat treatments

2019 · Martin Frkan, Radomila Konecna, et al. · Transportation research procedia · 57

PDF

Influence of Build Direction on the Fatigue Behaviour of Ti6Al4V Alloy Produced by Direct Metal Laser Sintering

2016 · Adrián Bača, Radomila Konečná, et al. · Materials Today Proceedings · 55

INFLUENCE OF ROUGH AS-BUILT SURFACES ON SMOOTH AND NOTCHED FATIGUE BEHAVIOR OF L-PBF AlSi10Mg

2020 · Gianni Nicoletto · Additive manufacturing · 50

Mixed Mode I/II fatigue crack growth in adhesive joints

2006 · A. Pirondi, G. Nicoletto · Engineering Fracture Mechanics · 49

Thermo-mechanical finite element analysis in press-packed IGBT design

2000 · A Pirondi, G Nicoletto, et al. · Microelectronics Reliability · 47

Smooth and notch fatigue behavior of selectively laser melted Inconel 718 with as-built surfaces

2019 · Gianni Nicoletto · International Journal of Fatigue · 46

Influence of post fabrication heat treatments on the fatigue behavior of Ti-6Al-4V produced by selective laser melting

2017 · Gianni Nicoletto, Stefania Maisano, et al. · Procedia Structural Integrity · 46

PDF

Mesoscopic strain fields in woven composites: Experiments vs. finite element modeling

2008 · Gianni Nicoletto, Giancarlo Anzelotti, et al. · Optics and Lasers in Engineering · 46

Fatigue crack growth behavior of Inconel 718 produced by selective laser melting

2015 · R. Konecná, L. Kunz, et al. · Frattura ed Integrità Strutturale · 45

PDF

Resistance of direct metal laser sintered Ti6Al4V alloy against growth of fatigue cracks

2017 · R. Konečná, L. Kunz, et al. · Engineering Fracture Mechanics · 43

Mesomechanic strain analysis of twill-weave composite lamina under unidirectional in-plane tension

2008 · Giancarlo Anzelotti, Gianni Nicoletto, et al. · Composites Part A Applied Science and Manufacturing · 42

Determination of the relationship between microstructure and constitutive behaviour of nodular cast iron with a unit cell model

2005 · L Collini, G Nicoletto · The Journal of Strain Analysis for Engineering Design · 41

Mixed Mode I/II fracture toughness of bonded joints

2002 · A. Pirondi, G. Nicoletto · International Journal of Adhesion and Adhesives · 41

On the visualization of heterogeneous plastic strains by Moiré interferometry

2002 · Gianni Nicoletto · Optics and Lasers in Engineering · 37

Works count: 179

Citation count: 3,068

H-index: 28

I10-index: 75