Get started
Author

Pascal Vantomme

Experimental investigation of drilling damage and stitching effects on the mechanical behavior of carbon/epoxy composites
2014 · Yosra Turki, Malek Habak, et al. · International Journal of Machine Tools and Manufacture · 93
A Review on Drilling of Multilayer Fiber-Reinforced Polymer Composites and Aluminum Stacks: Optimization of Strategies for Improving the Drilling Performance of Aerospace Assemblies
2022 · Gérald Franz, Pascal Vantomme, et al. · Fibers · 51
PDF
Highlighting cutting mechanisms encountered in carbon/epoxy composite drilling using orthogonal cutting
2017 · Y. Turki, M. Habak, et al. · The International Journal of Advanced Manufacturing Technology · 23
Effect of tool geometry and cutting parameters on delamination and thrust forces in drilling CFRP/Al-Li
2016 · Souhail El Bouami, Malek Habak, et al. · AIP conference proceedings · 9
Tool geometry optimization for drilling CFRP/Al-Li stacks with a lightning strike protection
2017 · Souhail El Bouami, Malek Habak, et al. · AIP conference proceedings · 7
An Experimental Study of Drilling Parameters Effect on Composite Carbon/Epoxy Damage
2013 · Yosra Turki, Malek Habak, et al. · Key engineering materials · 7
Method to evaluate residual stresses in the laser cutting process
2002 · Y. Zamachtchikov, F. Breaban, et al. · Lasers in Engineering · 7
Study of glass–ceramic materials interfaces
1998 · P Vantomme, P Deprez, et al. · Materials Letters · 7
Prediction of Cutting Forces Using ANNs Approach in Hard Turning of AISI 52100 steel
2011 · Soua^d Makhfi, Malek Habak, et al. · AIP conference proceedings · 5
An Optimized ANN Approach for Cutting Forces Prediction in AISI 52100 Bearing Steel Hard Turning
2013 · Raphaël Velasco, Malek Habak, et al. · 4
Influence of Cutting Parameters and Tool Geometry on Cutting Forces and Damage on 2D and 3D Carbon/Epoxy Composites in Drilling
2014 · Yosra Turki, Malek Habak, et al. · Key engineering materials · 3
An Experimental Study of the Routing of a Unidirectional Carbon∕Epoxy Composite
2011 · Yosra Turki, Malek Habak, et al. · AIP conference proceedings · 1
Friction study of carbon-silicon carbide couples
2000 · P Vantomme, P Deprez, et al. · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · 1
Wear study of carbon–silicon carbide couples
2000 · P. Vantomme, P. Deprez, et al. · Tribology Letters · 1
Etude experimentale des mecanismes de coupe des materiaux composites carbone / epoxy
2018 · Yosra Turki, Pascal Vantomme
Evaluation expérimentale du comportement d'un composite carbone/époxy en usinage
2011 · Yosra Turki, Malek Habak, et al. · DSpace (Centre National De La Recherche Scientifique)
PDF
Prédiction des contraintes résiduelles en tournage dur de l'acier 100Cr6 par la méthode des réseaux de neurones
2011 · Makhfi, Souâd, Habak, Malek, et al. · DSpace (Centre National De La Recherche Scientifique)
PDF
Numerical Modelling of laser Cutting Carbon Styeel
2006 · Breaban, F., Entringer, P., et al. · HAL
Calculation of instantaneous sections in multi-axis milling
2002 · P Vantomme, P Deprez, et al. · Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering
Reduction of Core Loss of Grain-Oriented Silicon Steels by High-Power Laser Diodes
2001 · J.-F. Coutouly, F. Breaban, et al. · Advanced Engineering Materials
Continuous wave-CO 2 laser power control process applied to welding
2001 · P Deprez, P Vantomme, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture
Dynamic Friction of Carbon‐Ceramic Couples
2000 · P. Vantomme, P. Deprez, et al.
Étude d’un composite carbone-carbone pour une application en fabrication du verre creux
1997 · P. Vantomme, P. Déprez, et al. · Matériaux & Techniques
Contribution a l'etude des outillages et de leur lubrification dans le formage du verre creux : evolution vers une lubrification integree
1988 · Pascal Vantomme
Works count: 26
Citation count: 219
H-index: 7
I10-index: 3
Year
Topic
Type