Get started
Author

Satyam Shivam Gautam

Observed names: S. S. Gautam, S.S. Gautam, Satyam Shivam Gautam
ORCID: 0000-0001-8868-116X
Observed ORCID: 0000-0001-8868-116X
OpenAlex ID: A5046240996
Structural, optical, and nuclear magnetic resonance studies of V2O5-doped lead calcium titanate borosilicate glasses
2018 · Sangeeta Das, Abhishek Madheshiya, et al. · Journal of Physics and Chemistry of Solids · 40
Correlations on heat transfer rate and friction factor of a rectangular toothed v-cut twisted tape exhibiting the combined effects of primary and secondary vortex flows
2022 · Sanjay Kumar Singh, Ruchin Kacker, et al. · International Communications in Heat and Mass Transfer · 37
Synthesis, structural, mechanical, and biological properties of HAp-ZrO2-hBN biocomposites for bone regeneration applications
2021 · Amarendra Gautam, Chandkiram Gautam, et al. · Ceramics International · 34
Microwave synthesis of hydroxyapatite bioceramic and tribological studies of its composites with SrCO3 and ZrO2
2016 · C. R. Gautam, M. Tamuk, et al. · Journal of Materials Science · 33
Processing and optical characterization of lead calcium titanate borosilicate glass doped with germanium
2017 · C.R. Gautam, Sangeeta Das, et al. · Journal of Physics and Chemistry of Solids · 30
Optimization of porosity behavior of hybrid reinforced titanium metal matrix composite through RSM, ANN, and GA for multi-objective parameters
2024 · Birhane Assefa Gemeda, Devendra Kumar Sinha, et al. · Journal of Engineering and Applied Science · 20
Fabrication and optical characterizations of lead calcium titanate borosilicate glasses
2017 · Sangeeta Das, Abhishek Madheshiya, et al. · Journal of Non-Crystalline Solids · 20
Predicting the elastic properties of hemp fiber – A comparative study on different polymer composite
2021 · Rajib Bhowmik, Sibaji Das, et al. · Materials Today Proceedings · 15
Multi-objective optimization of thermo-hydraulic behavior of heat exchanger with v-cut twisted tape in axial and radial direction using NSGA-II
2023 · Sanjay Kumar Singh, Ruchin Kacker, et al. · Energy Sources Part A Recovery Utilization and Environmental Effects · 12
AZ31-Mg metal matrix composite in metallurgical and testing approaches
2023 · Betelhem Haymanot Maryam, Devendra Kumar Sinha, et al. · Advances in Mechanical Engineering · 11
PDF
Static Characteristics of Conical Hydrostatic Journal Bearing Under Micropolar Lubrication
2014 · N. K. Rana, S. S. Gautam, et al. · Journal of The Institution of Engineers (India) Series C · 11
Application of ANN methodology to optimize the criteria of performance evaluation with multiple v-cut twisted tape inserts
2024 · Sanjay Kumar Singh, Ruchin Kacker, et al. · Numerical Heat Transfer Part B Fundamentals · 10
Correlations on heat-transfer rate and friction factor using radial and axial v-cut geometry on a twisted tape in a double-pipe heat exchanger
2024 · Sanjay Kumar Singh, Ruchin Kacker, et al. · Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering · 9
Approximate Analysis of Dynamic Characteristics of Short Journal Bearings in Turbulent Micropolar Lubrication
2014 · N. K. Rana, S. S. Gautam, et al. · Journal of The Institution of Engineers (India) Series C · 9
Stiffness and damping characteristics of conical multirecess hybrid journal bearing for different load arrangements
2019 · N. K. Rana, S. S. Gautam, et al. · SN Applied Sciences · 8
PDF
Parametric optimization of dry sliding wear and friction of germanium doped lead calcium titanate borosilicate glass ceramic
2018 · Sangeeta Das, S.S. Gautam, et al. · Ceramics International · 8
Effect of NaOH Concentration, Fiber Length, Fiber Loading, and Filler Loading on the Mechanical Properties of Banana Fiber‐Reinforced Polyester Composites
2025 · Lamrot Kebede Kassa, Moera Gutu Jiru, et al. · Advances in Materials Science and Engineering · 7
PDF
Mechanical, surface morphological and multi-objective optimization of tribological properties of V2O5 doped lead calcium titanate borosilicate glass ceramics
2020 · Sangeeta Das, Abhishek Madheshiya, et al. · Ceramics International · 7
Experimental and statistical analysis of heat transfer and friction factor for rectangular-toothed v-cut twisted tapes using TiO2/H2O nanofluid
2024 · Sanjay Kumar Singh, Ruchin Kacker, et al. · International Journal of Advances in Engineering Sciences and Applied Mathematics · 6
Dynamic mechanical behavior of a nano sized alumina fiber reinforced epoxy hybrid composites
2022 · Raj Kishor Das, Biswajit Nayak, et al. · Materials Today Proceedings · 6
Vibration performances of MRE embedded sandwich beam: experimental study
2018 · Biswajit Nayak, Raj Kishor Das, et al. · Vibroengineering PROCEDIA · 6
PDF
On the Stiffness and Damping Coefficients of Constant Flow Valve Compensated Conical Hydrostatic Journal Bearing with Micropolar Lubricant
2016 · N.K. Rana, S.S. Gautam, et al. · Procedia Technology · 6
PDF
Comparative Study on the Effect of Recesses on Conical Hybrid Journal Bearing Compensated with CFV under Micropolar Fluid Lubrication
2016 · Narendra Kumar Rana, Satyam Shivam Gautam, et al. · Tribology online · 6
PDF
Multi-response Optimization of 3D Printed Parts with Triangular Patterns Using Nonlinear Machine Learning Regressor Technique
2024 · Sourabh Tandon, Sanjay Kumar Singh, et al. · Journal of Materials Engineering and Performance · 5
Fabrication and characterisation of GFRP composite as skin material of sandwich structure
2022 · Raj Kishor Das, Biswajit Nayak, et al. · Materials Today Proceedings · 5
Works count: 47
Citation count: 409
H-index: 11
I10-index: 12
Year
Topic
Type