Get started
Author

Abdelkader Benkhettou

Observed names: A. Benkhettou, Abdelkader BENKHETTOU, Benkhettou A., Benkhettou Abdelkader
ORCID: 0000-0003-1516-8159
Observed ORCID: 0000-0003-1516-8159
OpenAlex ID: A5047828819
Enhanced orthopedic implant design for transfemoral amputation incorporating a honeycomb structure technology
2024 · Ismail Boudjemaa, Omar Khatir, et al. · Mechanics of Advanced Materials and Structures · 17
Optimizing mechanical behavior of middle ear prosthesis using finite element method with material degradation FGM in three functions
2024 · O. Khatir, S. M. Fekih, et al. · Mechanics of Advanced Materials and Structures · 17
Multi-objective optimization of prosthetic multi-cells foam liner
2024 · Abdelkader Benkhettou, Omar Khatir, et al. · Mechanics of Advanced Materials and Structures · 14
Effect of personalized liner thickness on the stresses at the stump-prosthesis interface
2023 · Abderahmane Sahli, Abdelmadjid Moulgada, et al. · Mechanics of Advanced Materials and Structures · 14
Effect of multi-layer prosthetic foam liner on the stresses at the stump–prosthetic interface
2021 · Ismail Boudjemaa, Abderahmane Sahli, et al. · Frattura ed Integrità Strutturale · 14
PDF
Enhancing pressure ulcer prevention through optimized design of a multi-cellular foam mattress
2024 · Abdelkader Benkhettou, Omar Khatir, et al. · Mechanics of Advanced Materials and Structures · 12
Enhancing middle ear implants: Study of biocompatible materials with hydroxyapatite coating
2024 · Omar Khatir, Fekih Sidi Mohamed, et al. · Mechanics of Advanced Materials and Structures · 12
Evaluation and Comparison of the Mechanical Behaviors of a Middle Ear Prosthesis using the Finite Element Method
2024 · Fekih Sidi Mohamed, Khatir Omar, et al. · Acta Mechanica Slovaca · 12
Study of the behavior of TORP middle ear prostheses of various lengths by the finite element method
2024 · Khatir Omar, Fekih Sidi Mohamed, et al. · Mechanics of Advanced Materials and Structures · 10
Optimizing Torp Middle Ear Prosthesis Material Performance Using Fgm Material Degradation Approach
2023 · Khatir Omar, Fekih Sidi Mohamed, et al. · Journal of the Serbian Society for Computational Mechanics · 9
PDF
Multi-objective Optimization of Multi-cells Foam Mattress
2022 · Abdelkader Benkhettou, Abderahman Sahli, et al. · Periodica Polytechnica Mechanical Engineering · 7
PDF
Preliminary results on the effects of orthopedic implant stiffness fixed to the cut end of the femur on the stress at the stump-prosthetic interface
2021 · Ismail Boudjemaa, A. Sahli, et al. · Frattura ed Integrità Strutturale · 5
PDF
The effect of an innovative sandwich-structure liner on stress distribution in the residual limb: A transtibial Amputation model
2025 · I. Boudjemaa, Omar Khatir, et al. · Mechanics of Advanced Materials and Structures · 4
Evaluating Polyetheretherketone (PEEK) as a Superior Alternative to Titanium in Middle Ear Implants: A Finite Element Modeling Study
2024 · Omar KHATIR, Abdelkader BENKHETTOU, et al. · The Eurasia Proceedings of Science Technology Engineering and Mathematics · 4
PDF
Dynamic analysis and material optimization of ossicular replacement prostheses
2025 · Abdelkader Benkhettou, Omar Khatir, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 3
Impact of mattress foam hyperelasticity on interface pressure and spinal alignment: A finite element analysis study
2025 · Omar Khatir, Benkhettou Abdelkader, et al. · Mechanics of Advanced Materials and Structures · 3
Innovative Stress-responsive Liner Design for Lower Limb Disability
2024 · Ismail Boudjemaa, Abdulmohsen Albedah, et al. · Journal of Disability Research · 3
PDF
Finite Element Analysis of Hydroxyapatite-Coated Titanium and Steel Hip Implants: Impacts on Stress Redistribution
2024 · Ismail Boudjemaa, Omar Khatir, et al. · Acta Mechanica Slovaca · 2
PDF
Biomechanical evaluation of load-bearing performance and primary stability in a novel transhumeral osseointegrated prosthesis: a finite element analysis
2026 · Ismail Boudjemaa, Omar Khatir, et al. · Computer Methods in Biomechanics & Biomedical Engineering · 1
Genetic Algorithm Optimization of Multilayer Structure of Polyurethane Foam
2021 · Abdelkader Benkhettou, Smail Benbarek, et al. · SSRN Electronic Journal · 1
Biomechanical optimization of multilayer mattress designs using finite element modeling: Effects of egg-crate topography on pressure redistribution
2026 · Ismail Boudjemaa, Abdelkader Benkhettou, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science
Effect of Printing Angle on Mechanical Properties of Fused Filament Fabrication (FFF)-Printed Polymers for Below-Knee Prosthetic Sockets: An Experimental and Finite Element Analysis Study
2026 · Ismail Boudjemaa, Omar Khatir, et al. · Polymers
Works count: 22
Citation count: 164
H-index: 9
I10-index: 9
Year
Topic
Type