Get started
Author

Ferit Fıçıcı

Observed names: F. Ficici, F. Fıçıcı, FIÇICI, Ferit, Ferit FIÇICI, Ferit Ficici, Ferit Fiçici, Fıçıcı, Ferit, Fıçıcı, ferit
Observed institution: Sakarya University
ORCID: 0000-0003-2344-5910
Observed ORCID: 0000-0003-2344-5910
OpenAlex ID: A5047893273
Experimental optimization of dry sliding wear behavior of in situ AlB2/Al composite based on Taguchi’s method
2012 · Sakip Koksal, Ferit Ficici, et al. · Materials & Design (1980-2015) · 158
Friction and wear studies between cylinder liner and piston ring pair using Taguchi design method
2011 · Murat Kapsiz, Mesut Durat, et al. · Advances in Engineering Software · 94
The effects of coating materials in spark ignition engine design
2011 · Mesut Durat, Murat Kapsiz, et al. · Materials & Design (1980-2015) · 49
The effects of vortex finder on the pressure drop in cyclone separators
2010 · Ferit Fıçıcı, Vedat Arı, et al. · International Journal of the Physical Sciences · 47
Evaluation of the Taguchi method for wear behavior of Al/SiC/B 4 C composites
2011 · Ugur Soy, Ferit Ficici, et al. · Journal of Composite Materials · 38
The Corrosion Resistance Behaviors of Metallic Bipolar Plates for PEMFC Coated with Physical Vapor Deposition (PVD): An Experimental Study
2016 · H. Kahraman, I. Cevik, et al. · Arabian Journal for Science and Engineering · 35
Production of functionally graded SiC/Al-Cu-Mg composite by centrifugal casting
2014 · Ömer Savaş, Ramazan Kayıkcı, et al. · Science and Engineering of Composite Materials · 25
PDF
Optimization of tribological parameters for a brake pad using Taguchi design method
2013 · Ferit Ficici, Mesut Durat, et al. · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 25
Evaluation of surface roughness in drilling particle-reinforced composites
2020 · Ferit Ficici · Advanced Composites Letters · 24
PDF
Investigation of Unlubricated Sliding Wear Behaviours of In-Situ AlB 2 /Al Metal Matrix Composite
2011 · Ferit Ficici, Sakip Koksal, et al. · Advanced Composites Letters · 23
PDF
Investigation of thrust force in drilling polyphthalamide (PPA) composites
2021 · Ferit Ficici · Measurement · 22
Influence of cutting tool and conditions on machinability aspects of polyphthalamide (PPA) matrix composite materials with 30 % glass fiber reinforced
2016 · Ferit Ficici, Zekeriya Ayparcasi, et al. · The International Journal of Advanced Manufacturing Technology · 21
The experimental optimization of abrasive wear resistance model for an in-situ AlB2/Al-4Cu metal matrix composite
2016 · Ferit Ficici · Industrial Lubrication and Tribology · 18
Prediction and optimization of tribological behavior of nylon composites using Taguchi analysis method
2015 · H. Unal, F. Ficici, et al. · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 17
Applications of taguchi design method to study wear behaviour of boronized AISI 1040 steel
2011 · Ferit Fıçıcı, Murat Kapsiz, et al. · International Journal of the Physical Sciences · 17
Production of Functionally Graded AlB2/Al-4%Mg Composite by Centrifugal Casting
2013 · Ömer Savaş, Ramazan Kayikci, et al. · Periodicals of Engineering and Natural Sciences (PEN) · 15
PDF
Microstructural characterization and wear properties of in situ AlB 2 –reinforced Al–4Cu metal matrix composite
2015 · Ferit Ficici, Sakip Koksal · Journal of Composite Materials · 14
Investigation of Tribological Behavior of PTFE Composites Reinforced with Bronze Particles by Taguchi Method
2024 · Ferit Ficici, Ismail Ozdemir, et al. · Journal of Composites Science · 13
PDF
Investigation of wear mechanism in drilling of PPA composites for automotive industry
2023 · Ferit Ficici · Journal of Engineering Research · 12
Optimization of the Preheater Cyclone Separators Used in the Cement Industry
2012 · Ferit Ficici, Vedat Ari · International Journal of Green Energy · 11
Analysis of Weight loss in Reciprocating Wear Test of Cylinder Liner and Piston Ring Coated with Molybdenum
2021 · Ferit Ficici, Sezer Kurgun · Arabian Journal for Science and Engineering · 10
Effect of Copper Addition to Aluminium Alloys on Surface Roughness in Terms of Turning Operation
2017 · F. Özen, F. Fıçıcı, et al. · Acta Physica Polonica A · 10
PDF
Effects of cutting parameters on delamination during drilling of Polyphthalamide (PPA) Matrix Composite Material with 30% Glass Fiber Reinforcement
2015 · F. Ficici, Z. Ayparcasi · Acta Physica Polonica A · 9
PDF
Abrasive Wear of In Situ AlB2/Al-4Cu Composite Material Produced by Squeeze Casting Method
2014 · Ferit Ficici · JOM · 9
Determination of optimum particle size of Al2O3/SiCp reinforced hybrid composites materials in wear testing
2015 · Necat Altinkök, Ferit Ficici, et al. · Industrial Lubrication and Tribology · 8
Works count: 50
Citation count: 766
H-index: 15
I10-index: 22
Year
Topic
Type