Get started
Author

Septi Boucherit

Observed names: Boucherit Septi, Boucherit, Septi, Bouchrite Sebti, S. Boucherit, Sebti Boucherit, Septi BOUCHERIT
ORCID: 0000-0002-5455-7221
Observed ORCID: 0000-0002-5455-7221
OpenAlex ID: A5048373556
Three-dimensional solid particle positions in a flow via multiangle off-axis digital holography
2008 · Sebti Boucherit, Larbi Bouamama, et al. · Optics Letters · 20
Modeling and Optimization of Cutting Parameters during Machining of Austenitic Stainless Steel AISI304 Using RSM and Desirability Approach
2020 · Septi Boucherit, Sofiane Berkani, et al. · Periodica Polytechnica Mechanical Engineering · 14
PDF
Assessment of performance parameters in intermittent turning and multi-response optimization of machining conditions using DF, MOORA, VIKOR, and coupled NSGAII-VIKOR methods
2024 · Fethi Khelfaoui, Mohammed Athmane Yallese, et al. · The International Journal of Advanced Manufacturing Technology · 12
PDF
RSM Modelling, and Multi-Object Optimization of Turning Parameters for Polyamide (PA66) Using PCA and PCA Coupled with TOPSIS
2022 · Septi Boucherit, Ahmed ZAIDI, et al. · Mechanika · 9
Evaluation of cutting parameters during dry turning of AISI 304 stainless steel and optimization through a modified WPCA approach
2024 · Boucherit Septi, Kaddeche Mounia, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 8
Minimizing Tool Wear, Cutting Temperature and Surface Roughness in the Intermittent Turning of AISI D3 Steel Using the DF and GRA Method
2023 · Fethi Khelfaoui, Mohammed Athmane Yallese, et al. · Tribology in Industry · 8
PDF
Multi-objective optimization of inconel 718 turning parameters using PCA-MARCOS and MARCOS-Taguchi
2023 · Mohamed Athmane Yallese, Septi Boucherit, et al. · Engineering Research Express · 6
PDF
Multi-Objective Optimization of the Inconel 718 Turning Parameters Using MARCOS–Based Taguchi S/N ratio
2023 · Septi BOUCHERIT, Mohamed Athmane YALLESE, et al. · The Eurasia Proceedings of Science Technology Engineering and Mathematics · 5
PDF
Experimental investigation on the performance of ceramics and CBN cutting materials during dry machining of cast iron: Modeling and optimization study using RSM, ANN, and GA
2023 · Boutheyna Gasmi, Mohamed Athmane Yallese, et al. · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · 5
Prediction of Cutting Tool’s Optimal Lifespan Based on the Scalar Indicators and the Wavelet Multi-resolution Analysis
2016 · Mohamed Khemissi Babouri, Nouredine Ouelaa, et al. · Lecture notes in mechanical engineering · 4
Formulation of off-axis single reference beam and two angle views for digital holography
2010 · Sebti Boucherit, Larbi Bouamama, et al. · Journal of Optics · 4
PDF
Multi-Objective Optimization in Intermittent Turning: Balancing Productivity, Surface Quality, Sound Intensity, and Tool Vibration Using MCDM Methods
2025 · Mohammed Athmane Yallese, Septi Boucherit, et al. · Journal of Vibration Engineering & Technologies · 3
Single and multi-objective optimization of turning performance characteristics of Inconel 718 under MQL conditions using LOPCOW and MEREC weighting integrated with DF, MABAC, and COPRAS
2026 · Tarik Azzouz, Mohamed Athmane Yallese, et al. · The International Journal of Advanced Manufacturing Technology · 2
Comparative study of turning two engineering plastics (POM-C and PA-6) and optimisation using GA, SA, GRA and COPRAS with and without weighting (entropy, critic, Swara, ROC)
2025 · Mounia Kaddeche, Septi Boucherit, et al. · International Journal of Machining and Machinability of Materials · 2
PDF
Dry turning of X2CrNi18-09 using coated carbide tools: modelling and optimization of multiple performance characteristics
2019 · Septi BOUCHERIT, Sofiane BERKANI, et al. · Mechanika · 2
PDF
Prediction of Optimal Lifetime of the Tool’s Wear in Turning Operation of AISI D3 Steel Based on the a New Spectral Indicator SCG
2019 · Mohamed Khemissi Babouri, Nouredine Ouelaa, et al. · Lecture notes in mechanical engineering · 2
Statistical analysis, modeling and multi-criteria optimization using MOOSRA, COPRAS, MABAC, and DF approaches for eco-efficient and productive machining of Inconel 718 under dry and MQL conditions
2026 · Tarik Azzouz, Mohamed Athmane Yallese, et al. · Engineering Research Express · 1
Robust evaluation of cutting process performance in AISI 420 steel turning using a vibration-based MCDM framework
2026 · Fateh Boutaghane, Abdelaziz Mahmoud Bouchelagham, et al. · The International Journal of Advanced Manufacturing Technology
A statistical inference framework for robust machining parameter selection: Application to multi-criteria decision making under normalization uncertainty
2026 · Boucherit, Septi · Zenodo (CERN European Organization for Nuclear Research)
Mono and multi-objective optimisation in hard machining of DIN 100Cr6 with wiper ceramic insert using Taguchi, M-PCA, MOORA and DF methods
2026 · Chihaoui Salim, Alper Uysal, et al. · Engineering Research Express
IS-Score & w-DMR Framework for MCDM Normalization Robustness (Version 1.0)
2026 · Boucherit, Septi, Kaddeche, Mounia, et al. · Zenodo (CERN European Organization for Nuclear Research)
Author response for "Statistical analysis, modeling and multi-criteria optimization using MOOSRA, COPRAS, MABAC, and DF approaches for eco-efficient and productive machining of Inconel 718 under dry and MQL conditions"
2026 · Tarik Azzouz, Mohamed Athmane Yallese, et al. · Publons reviews and discussion
Assessment of turning performance of POM-C and PA.6 using Taguchi, VIKOR, TOPSIS and CoCoSo methods, incorporating AHP and FUCUM
2024 · Mounia Kaddeche, Septi Boucherit, et al. · International Journal of Manufacturing Research
Application Of The Fractional Fourier Transform To The Restitution Of The Holograms Of Particles Moving
2008 · S. Boucherit, L. Bouamama, et al. · AIP conference proceedings
Works count: 25
Citation count: 107
H-index: 6
I10-index: 3
Year
Topic
Type