Get started
Author

Stefan Golling

Observed names: Golling, Stefan, S Golling, S. Golling
Institution: Gestamp (Sweden)
ORCID: 0000-0002-5099-6462
Observed ORCID: 0000-0002-5099-6462
OpenAlex ID: A5048439251
Influence of microstructure on the fracture toughness of hot stamped boron steel
2018 · Stefan Golling, David Frómeta, et al. · Materials Science and Engineering A · 55
Investigation on the influence of loading-rate on fracture toughness of AHSS grades
2018 · Stefan Golling, David Frómeta, et al. · Materials Science and Engineering A · 30
Characterization of ductile fracture properties of quench-hardenable boron steel: Influence of microstructure and processing conditions
2016 · Stefan Golling, Rickard Östlund, et al. · Materials Science and Engineering A · 26
A study on homogenization methods for steels with varying content of ferrite, bainite and martensite
2015 · Stefan Golling, Rickard Östlund, et al. · Journal of Materials Processing Technology · 25
The detection of plastic deformation in rolling element bearings by acoustic emission
2017 · S. Schnabel, P. Marklund, et al. · Tribology International · 20
Microstructure based modeling of ductile fracture initiation in press-hardened sheet metal structures
2016 · Rickard Östlund, Stefan Golling, et al. · Computer Methods in Applied Mechanics and Engineering · 13
Absolute Measurement of Elastic Waves Excited by Hertzian Contacts in Boundary Restricted Systems
2016 · S. Schnabel, S. Golling, et al. · Tribology Letters · 10
PDF
The essential work of fracture in peridynamics
2023 · Christer Stenström, Kjell Eriksson, et al. · International Journal of Fracture · 8
PDF
Microstructural and Mechanical Study of Press Hardening of Thick Boron Steel Sheet
2017 · J Pujante, E Garcia-Llamas, et al. · Journal of Physics Conference Series · 8
PDF
Optimization of Thick 22MnB5 Sheet Steel Part Performance through Laser Tempering
2023 · Eduard Garcia-Llamas, Jaume Pujante, et al. · Metals · 7
PDF
Modelling of Plastic Deformation and Fracture in Hot Stamped Steel with Multi-Phase Microstructure
2017 · Stefan Golling, Rickard Östlund, et al. · Procedia Engineering · 6
PDF
The influence of contact time and event frequency on acoustic emission signals
2017 · Stephan Schnabel, Stefan Golling, et al. · Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology · 5
A stress-based fracture criteria validated on mixed microstructures of ferrite and bainite over a range of stress triaxialities
2016 · Stefan Golling, Rickad Östlund, et al. · Materials Science and Engineering A · 4
Fracture Toughness Evaluation of Thick Press Hardened 22MnB5 Sheets for High Crash Performance Applications in Trucks
2019 · David Frómenta, Sergi Parareda, et al. · 3
From Blank to Fractured Component: Numerical and Experimental Results of a Laboratory Scale Component
2018 · Stefan Marth, Stefan Golling, et al. · IOP Conference Series Materials Science and Engineering · 2
PDF
A comparative study of different failure modeling strategies on a laboratory scale test component
2017 · Stefan Golling, Rickard Östlund, et al. · KTH Publication Database DiVA (KTH Royal Institute of Technology) · 2
Fracture resistance of tailor tempered microstructures obtained by different press hardening conditions
2015 · Daniel Casellas, A. Lara, et al. · 2
Stress concentration at the door opening of steel towers for wind turbines
2009 · Stefan Golling · KTH Publication Database DiVA (KTH Royal Institute of Technology) · 2
Fracture mechanics based modelling of failure in advanced high strength steels
2017 · Pär Jonsén, Stefan Golling, et al. · DiVA (Luleå University of Technology) · 1
A fracture mechanics approach to develop high crash resistant microstructures by press hardening
2017 · Daniel Casellas, David Frómeta, et al. · UPCommons institutional repository (Universitat Politècnica de Catalunya) · 1
Determination of the essential work of fracture at high strain rates
2017 · Stefan Golling, David Frómeta, et al. · UPCommons institutional repository (Universitat Politècnica de Catalunya) · 1
PDF
Determination of Mechanical Properties of Differently Oriented ß-Tin Crystals in Small Solder Joints and Small Tensile Specimens using EBSD and Nano Hardness Measurements
2007 · J. Villain, U. Corradi, et al. · IEEE Electronics Packaging Technology Conference (EPTC) · 1
Rapid Assessment of Fatigue Resistance in Press-Hardened Specimens and Components
2024 · Sergi Parareda, Daniel Casellas, et al. · AIST CHS2 Conference
Wear Modeling in Hot Stamping — From Laboratory Testing Toward Application on Industrial Dies
2024 · Stefan Golling, Petter Ulfberg, et al. · AIST CHS2 Conference
Modeling of multi-phase microstructures in press hardened components: plastic deformation and fracture in different stress states
2017 · S Golling, R Östlund, et al. · Journal of Physics Conference Series
PDF
Works count: 32
Citation count: 232
H-index: 8
I10-index: 7
Year
Topic
Type