Get started
Author

Lakhdar Boulanouar

Observed names: BOULANOUAR, L, BOULANOUAR, Lakhdar, Boulanouar, L., Boulanouar, Lakhdar, L Boulanouar, L. Boulanouar, LAKHDAR BOULANOUAR
OpenAlex ID: A5049454122
Hard machining of hardened bearing steel using cubic boron nitride tool
2008 · Mohamed Athmane Yallese, Kamel Chaoui, et al. · Journal of Materials Processing Technology · 207
Investigation and modeling of cutting forces and surface roughness when hard turning of AISI 52100 steel with mixed ceramic tool: cutting conditions optimization
2014 · I. Meddour, M. A. Yallese, et al. · The International Journal of Advanced Manufacturing Technology · 91
Mathematical modeling for turning on AISI 420 stainless steel using surface response methodology
2014 · Lakhdar Bouzid, Mohamed Athmane Yallese, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 70
Experimental and numerical study of chip formation during straight turning of hardened AISI 4340 steel
2005 · S Belhadi, T Mabrouki, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 67
Experimental approach to mechanical property variability through a high‐density polyethylene gas pipe wall
2005 · N. Kiass, R. Khelif, et al. · Journal of Applied Polymer Science · 57
The effects of cutting conditions on mixed ceramic and cubic boron nitride tool wear and on surface roughness during machining of X200Cr12 steel (60 HRC)
2005 · M A Yallese, J-F Rigal, et al. · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · 54
Detection and classification of bearing faults in industrial geared motors using temporal features and adaptive neuro-fuzzy inference system
2019 · Choug Abdelkrim, Mohamed Salah Meridjet, et al. · Heliyon · 42
PDF
Effects of coating material and cutting parameters on the surface roughness and cutting forces in dry turning of AISI 52100 steel
2017 · Ouahid Keblouti, Lakhdar Boulanouar, et al. · STRUCTURAL ENGINEERING AND MECHANICS · 32
Statistical analysis of AISI304 austenitic stainless steel machining using Ti(C, N)/Al2O3/TiN CVD coated carbide tool
2015 · Sofiane Berkani, Mohamed Athmane Yallese, et al. · International Journal of Industrial Engineering Computations · 23
PDF
High speed turning for hard material with PCBN inserts: tool wear analysis
2008 · Farouk Mahfoudi, Gautier List, et al. · International Journal of Machining and Machinability of Materials · 23
Evaluation of the cutting performance of PVD, CVD and MTCVD carbide inserts in dry turning of AISI 4140 steel using RSM-based NAMDE optimization
2022 · Billel Hamadi, Mohamed Athmane Yallese, et al. · Journal of the Brazilian Society of Mechanical Sciences and Engineering · 19
Usinage de l'acier 100Cr6 trempé par un outil en nitrure de bore cubique
2004 · Mohamed Athmane Yallese, Lakhdar Boulanouar, et al. · Mécanique & Industries · 19
Comparison on various machinability aspects between mixed and reinforced ceramics when machining hardened steels
2019 · Hamdi Aouici, Mohamed Elbah, et al. · Mechanics & Industry · 17
Modeling and optimization of machining parameters to minimize surface roughness and maximize productivity when turning polytetrafluoroethylene (PTFE)
2022 · Afef Azzi, Lakhdar Boulanouar, et al. · The International Journal of Advanced Manufacturing Technology · 16
Design optimization in hard turning of E19 alloy steel by analysing surface roughness, tool vibration and productivity
2020 · Mohamed Walid Azizi, Ouahid Keblouti, et al. · STRUCTURAL ENGINEERING AND MECHANICS · 15
RMS-based optimisation of surface roughness when turning AISI 420 stainless steel
2014 · Lakhdar Bouzid, Mohamed Athmane Yallese, et al. · International Journal of Materials and Product Technology · 15
Modeling and multi-objective optimization of surface roughness and productivity in dry turning of AISI 52100 steel using (TiCN-TiN) coating cermet tools
2016 · Ouahid Keblouti, Lakhdar Boulanouar, et al. · International Journal of Industrial Engineering Computations · 13
PDF
Multi response optimization of surface roughness in hard turning with coated carbide tool based on cutting parameters and tool vibration
2019 · Ouahid Keblouti, Lakhdar Boulanouar, et al. · STRUCTURAL ENGINEERING AND MECHANICS · 11
Machinability of Stellite 6 hardfacing
2010 · M. Benghersallah, L. Boulanouar, et al. · EPJ Web of Conferences · 11
PDF
Application of response surface methodology in describing the performance of mixed ceramic tool when turning AISI 4140 steel
2016 · Mohamed Elbah, Hamdi Aouici, et al. · Mechanics & Industry · 10
Comparison between mixed ceramic and reinforced ceramic tools in terms of cutting force components modelling and optimization when machining hardened steel AISI 4140 (60 HRC)
2015 · B. Fnides, H. Aouici, et al. · Mechanics & Industry · 10
PDF
Analysis of cutting forces and roughness during hard turning of bearing steel
2018 · Abderrahim Bouziane, Lakhdar Boulanouar, et al. · STRUCTURAL ENGINEERING AND MECHANICS · 9
A Comparative Study of the Performance of Uncoated, PVD, CVD and MTCVD Coated Carbide Inserts in Dry Turning of AISI4140 Steel
2022 · Billel Hamadi, Mohamed Athmane Yallese, et al. · Periodica Polytechnica Mechanical Engineering · 7
Effect of hardening on the machinability of C22 steel under drilling operations using twist HSS drill bit
2018 · N. Mokas, L. Boulanouar, et al. · The International Journal of Advanced Manufacturing Technology · 7
Dry High Speed Milling of Nickel-based Superalloy
2013 · M. Benghersallah, L. Boulanouar, et al. · Mechanika · 7
PDF
Works count: 53
Citation count: 871
H-index: 15
I10-index: 21
Year
Topic
Type