Get started
Author

В. И. Закиев

Observed names: V. I. Zakiev, V. I. Zakiyev, V. Zakiev, V. І. Zakiev, V.I. Zakiev, V. I. Zakiev, V. I. Zakiyev, VADIM ZAKIEV, Vadim I. Zakiev, Vadim Zakiev, Vadym Zakiev, Закиев, Вадим Исламович, Закієв, В. І.
Observed institutions: Ministry of Education and Science, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Frantsevich Institute for Problems in Materials Science, G.V. Kurdyumov Institute for Metal Physics, Donbass State Engineering Academy, National Technical University "Kharkiv Polytechnic Institute", National University "Kyiv Aviation Institute"
ORCID: 0000-0003-2444-1970
Observed ORCID: 0000-0003-2444-1970
OpenAlex ID: A5049620763
Characterization of ZrN coating low-temperature deposited on the preliminary Ar+ ions treated 2024 Al-alloy
2019 · M.A. Vasylyev, B.N. Mordyuk, et al. · Surface and Coatings Technology · 50
Effect of Incomplete Replacement of Cr for Cu in the Deposited Alloy of Fe–C–Cr–B–Ti Alloying System with a Medium Boron Content (0.5% wt.) on its Corrosion Resistance
2022 · B. O. Trembach, M. G. Sukov, et al. · METALLOFIZIKA I NOVEISHIE TEKHNOLOGII · 45
PDF
Enhanced Resistance of Ti6Al4V Alloy to High-Temperature Oxidation and Corrosion by Forming Alumina Composite Coating
2021 · B. N. Mordyuk, S. M. Voloshko, et al. · Journal of Materials Engineering and Performance · 43
Polymer Materials Reinforced with Silicon Nitride Particles for 3D Printing
2021 · O.B. Zgalat-Lozynskyy, O.O. Matviichuk, et al. · Powder Metallurgy and Metal Ceramics · 43
Coatings strength evaluation of cutting inserts using advanced multi-pass scratch method
2022 · Michael Storchak, Islam Zakiev, et al. · Measurement · 38
The role of hydrogen in the formation of oxide-ceramic layers on aluminum alloys during their plasma-electrolytic oxidation
2021 · Volodymyr Hutsaylyuk, Mykhailo Student, et al. · Journal of Materials Research and Technology · 38
PDF
Instrumented indentation study of materials edge chipping
2021 · Islam Zakiev, Michael Storchak, et al. · Ceramics International · 35
Glass Fracture during Micro-Scratching
2020 · Islam Zakiev, George A. Gogotsi, et al. · Surfaces · 32
PDF
Effect of Vacuum Hot Pressing Temperature on the Mechanical and Tribological Properties of the Fe–Cu–Ni–Sn–VN Composites
2020 · V. A. Mechnik, N. A. Bondarenko, et al. · Powder Metallurgy and Metal Ceramics · 30
Physico-mechanical and Tribological Properties of Fe-Cu-Ni-Sn and Fe-Cu-Ni-Sn-VN Nanocomposites Obtained by Powder Metallurgy Methods
2019 · V.A. Mechnik, N.A. Bondarenko, et al. · Tribology in Industry · 29
Effect of Exothermic Addition (CuO - Al) on the Structure, Mechanical Properties and Abrasive Wear Resistance of the Deposited Metal During Self-Shielded Flux-Cored Arc Welding
2021 · B. Trembach, A. Grin, et al. · Tribology in Industry · 28
PDF
Influence of diamond–matrix transition zone structure on mechanical properties and wear of sintered diamond-containing composites based on Fe–Cu–Ni–Sn matrix with varying CrB2 content
2021 · V.A. Mechnik, M.O. Bondarenko, et al. · International Journal of Refractory Metals and Hard Materials · 28
Hardening of Surface Layers of Cu–39Zn–1Pb Brass at Holding and High-Frequency Impact Deformation in Liquid Nitrogen
2019 · M. O. Vasylyev, B. M. Mordyuk, et al. · METALLOFIZIKA I NOVEISHIE TEKHNOLOGII · 28
PDF
Formation of Fe-Cu-Ni-Sn-VN Nanocrystalline Matrix by Vacuum Hot Pressing for Diamond-Containing Composite. Mechanical and Tribological Properties
2019 · V. A. Mechnik, N. A. Bondarenko, et al. · Journal of Superhard Materials · 26
Prediction of Fill Factor and Charge Density of Self-Shielding Flux-Cored Wire with Variable Composition
2023 · B. O. Trembach, D. V. Hlushkova, et al. · Materials Science · 24
Thermal and Ion Treatment Effect on Nanoscale Thin Films Scratch Resistance
2022 · V. Yanchuk, I. Kruhlov, et al. · METALLOFIZIKA I NOVEISHIE TEKHNOLOGII · 23
PDF
Fracture Mechanism Analysis of the Heat-Resistant Steel 15Kh2MFA(II) After Laser Shock-Wave Processing
2014 · I. B. Okipnyi, P. O. Maruschak, et al. · Journal of Failure Analysis and Prevention · 23
Mechanical and Tribological Properties of Fe−Cu−Ni−Sn Materials with Different Amounts of CrB2 Used as Matrices for Diamond-Containing Composites
2020 · V. A. Mechnik, N. A. Bondarenko, et al. · Journal of Superhard Materials · 22
Material surface layer damage estimation for cyclic loading conditions using the nanoindenting and nanoscratching techniques
2006 · S. R. Ignatovich, I. M. Zakiev, et al. · Strength of Materials · 22
Change of the Modulus of Elasticity of the Surface Nonasrtuctured Layer on U8 Steel
2023 · V. I. Kyryliv, V. I. Zakiev, et al. · Materials Science · 21
Micro-mechanical properties of bio-materials
2005 · В. И. Закиев, A. Markovsky, et al. · 18
Elevation of the Wear Resistance of Low-Alloy Structural Steel by Plasma-Powder Surfacing with Alloys Based on Iron, Chromium, and Nickel
2018 · E. F. Perepl’otchikov, Kh. B. Vasyliv, et al. · Materials Science · 14
Modification of Surface Layers of Cu–39Zn–1Pb Brass at High-Frequency Impact Deformation in the Air and Argon Inert Environments
2020 · M. A. Vasylyev, B. N. Mordyuk, et al. · METALLOFIZIKA I NOVEISHIE TEKHNOLOGII · 12
PDF
3d Printing of Porous Glass Products Using the Robocasting Technique
2022 · O.V. Derevianko, O.V. Derevianko, et al. · Powder Metallurgy and Metal Ceramics · 10
Comparative Study of the Mechanical and Tribological Characteristics of Fe–Cu–Ni–Sn Composites with Different CrB2 Content under Dry and Wet Friction
2021 · V. A. Mechnik, N. A. Bondarenko, et al. · Journal of Superhard Materials · 9
Works count: 62
Citation count: 774
H-index: 20
I10-index: 24
Year
Topic
Type