Get started
Author

Alfiya R. Luts

Observed names: A R Luts, A. R. Luts, A.R Luts, A.R. LUTS, A.R. Luts, Al'fiya Luc, Al'fiya Luts, А. Р. Луц
ORCID: 0000-0001-7889-9931
Observed ORCID: 0000-0001-7889-9931
OpenAlex ID: A5049876078
Effect of fluxes on structure formation of SHS Al–Ti–B grain refiner
2003 · Peijie Li, E.G Kandalova, et al. · Materials Letters · 21
Self-propagating high-temperature synthesis of highly dispersed titanium-carbide phase from powder mixtures in the aluminum melt
2014 · A. R. Luts, A. P. Amosov, et al. · Russian Journal of Non-Ferrous Metals · 14
Application of Shs Processes for the Production of in Situ Aluminum Matrix Composites Discretely Reinforced With Nanosized Titanium Carbide Particles. Review
2016 · A. P. Amosov, A. R. Luts, et al. · Izvestiya Non-Ferrous Metallurgy · 11
PDF
Using Different Powdered Carbon Forms for Reinforcing Aluminum Composite Materials with Carbon and Titanium Carbide: A Review
2020 · A. P. Amosov, A. R. Luts, et al. · Russian Journal of Non-Ferrous Metals · 10
Liquid matrix SHS manufacturing and heat treatment of Al–Mg composites reinforced with fine titanium carbide
2023 · A. R. Luts, Yu. V. Sherina, et al. · Izvestiya Non-Ferrous Metallurgy · 9
PDF
SHS process and structure formation of Al–Ti–B grain refiner made with the use of fluxes
2003 · Li Peijie, E.G. Kandalova, et al. · Materials Letters · 8
Self-propagating high-temperature synthesis of porous titanium carbide blanks for subsequent infiltration by melts
2021 · E.I. Latukhin, E.R. Umerov, et al. · Blanking productions in mechanical engineering (press forging foundry and other productions) · 4
Self-propagating high-temperature synthesis of (Al–2%Mn)–10%TiC and (Al–5%Cu–2%Mn)–10%TiC nanostructured composite alloys when doped with manganese powder
2018 · A. R. Luts, A. P. Amosov, et al. · Powder Metallurgy аnd Functional Coatings · 4
Selection of heat treatment and its impact on the structure and properties of AK10M2N–10%TiC composite material obtained via SHS method in the melt
2024 · A. R. Luts, Yu. V. Sherina, et al. · Izvestiya Non-Ferrous Metallurgy · 3
PDF
Self-Propagating High-Temperature Synthesis of (Al–2% Mn)–10% TiC and (Al–5% Cu–2% Mn)–10% TiC Nanostructured Composite Alloys Doped with Manganese Powder
2019 · A. R. Luts, A. P. Amosov, et al. · Russian Journal of Non-Ferrous Metals · 3
Effect of alloying on structure and properties of particle – reinforced aluminum matrix composites Al/TiC produced by SHS in aluminum melt
2018 · A P Amosov, A R Luts, et al. · Journal of Physics Conference Series · 3
PDF
Nanostructured Aluminum Matrix Composites of Al-10%TiC Obtained In Situ by the SHS Method in the Melt
2016 · Aleksandr P. Amosov, A.R. Luts, et al. · Key engineering materials · 3
Role of Halide Salts Na 3 AlF 6 and Na 2 TiF 6 in Self-propagating High-temperature Synthesis of Al-10%TiC Nanocomposite Alloy in Aluminum Melt
2014 · А. П. Амосов, А. Р. Луц, et al. · 3
The study of the effect of heat treatment on the properties of the AMg2–10%TiC and AMg6–10%TiC composite materials produced by self-propagating high-temperature synthesis
2024 · Yu. V. Sherina, A. R. Luts · Frontier materials & technologies · 2
PDF
The effect of reinforcement with a titanium carbide high-dispersity phase and subsequent heat treatment on the structure and properties of the AMg6 alloy
2023 · Yuliya Sherina, Al'fiya Luts, et al. · Science intensive technologies in mechanical engineering · 2
PDF
Carbon form influence on combustion synthesis of titanium carbide
2020 · A. D. Rybakov, A. R. Luts, et al. · AIP conference proceedings · 2
The Influence of TiC and TiB2 Reinforcement on the Properties and Structure of Aluminum Alloy AMg2
2024 · Yu. V. Sherina, A. R. Luts, et al. · Inorganic Materials Applied Research · 1
Obtaining of doped composite material Al—Cu—Mn—TiC with enhanced tribological properties
2020 · A.R. Luts, A.P. Amosov, et al. · Blanking productions in mechanical engineering (press forging foundry and other productions) · 1
Preparation of Composite Materials Reinforced With a Highly Dispersed Tic Phase Based on Industrial Alloys B95 and D16 by the Shs Method
2026 · Yulia V. Sherina, Alfiya R. Luts, et al. · IZVESTIA VOLGOGRAD STATE TECHNICAL UNIVERSITY
PDF
STUDY OF THE INFLUENCE OF SILICON ON THE STABILITY OF THE TiC PHASE IN THE PRODUCTION OF COMPOSITE MATERIAL AK10M2N ‒ 10 % TiC BY THE SHS METHOD
2025 · Yulia V. Sherina, Alfiya R. Luts, et al. · Bulletin of the Siberian State Industrial University
PDF
Carbon shape type and heat treatment effect on the structural characteristics of the carbide phase in the composite material Al-5%Cu-10%TiC obtained by the SHS method
2025 · Al'fiya Luc · Science intensive technologies in mechanical engineering
Microstructure and Phase Composition of Al-10%tic Composite Materials Doped With Copper
2025 · A.R. LUTS · IZVESTIA VOLGOGRAD STATE TECHNICAL UNIVERSITY
PDF
STUDY OF THE EFFECT OF ARGON ARC WELDING ON THE STRUCTURE AND MECHANICAL PROPERTIES OF AMg2-10%TiC AND AMg6-10%TiC COMPOSITE MATERIALS, OBTAINED BY SHS METHOD IN A MELT
2025 · Yuliya Sherina, Al'fiya Luts, et al. · Transport engineering
Influence of highly dispersed phase of titanium carbide on physical and mechanical properties of alloys AM4.5Kd and AK10M2N
2024 · Yu. V. Sherina, A. R. Luts, et al. · Voprosy Materialovedeniya
Evaluation of the Modifying Effect of Highly Dispersed Titanium Carbide Phase Obtained by the Shs Method in Aluminum Alloys
2023 · Alfiya R. Luts, Yulia V. Sherina, et al. · Bulletin of the Siberian State Industrial University
PDF
Works count: 30
Citation count: 104
H-index: 6
I10-index: 4
Year
Topic
Type