Get started
Author

Mirko Sinico

Observed names: Sinico, M., Sinico, Mirko
Institution: KU Leuven
ORCID: 0000-0002-1613-1713
Observed ORCID: 0000-0002-1613-1713
OpenAlex ID: A5050848905
Laboratory X-ray tomography for metal additive manufacturing: Round robin test
2019 · Anton du Plessis, Stephan G. le Roux, et al. · Additive manufacturing · 47
PDF
Experimental and numerical characterization of pure copper heat sinks produced by laser powder bed fusion
2022 · Gabriele Sciacca, Mirko Sinico, et al. · Materials & Design · 44
PDF
B-doped hardystonite bioceramics from preceramic polymers and fillers: Synthesis and application to foams and 3D-printed scaffolds
2016 · Hamada Elsayed, Mirko Sinico, et al. · Journal of the European Ceramic Society · 29
A Micro-Computed Tomography Comparison of the Porosity in Additively Fabricated CuCr1 Alloy Parts Using Virgin and Surface-Modified Powders
2021 · Mirko Sinico, Suraj Dinkar Jadhav, et al. · Materials · 22
PDF
Improving the surface quality of maraging 300 parts produced via laser powder bed fusion through powder distribution selection and optimized laser remelting
2025 · Mirko Sinico, Ann Witvrouw, et al. · Journal of Manufacturing Processes · 15
PDF
Investigation of the laser powder bed fusion manufacturing process and quasi-static behaviour of Ti6Al4V Voronoi structures
2024 · Cong Hou, Mirko Sinico, et al. · Journal of Materials Processing Technology · 15
PDF
High speed laser powder bed fusion of M789 tool steel with an optimized 120 µm layer thickness approach
2022 · Mirko Sinico, Jitka Metelkova, et al. · Procedia CIRP · 14
PDF
Influence of Powder Particle Size Distribution on the Printability of Pure Copper for Selective Laser Melting
2019 · Sinico, M., Cogo, G., et al. · Lirias (KU Leuven) · 14
PDF
A novel tomographic characterisation approach for sag and dross defects in metal additively manufactured channels
2021 · Markus Baier, Mirko Sinico, et al. · Additive manufacturing · 13
PDF
Enhancing fatigue life of as-printed martensitic M789 steel produced by laser powder bed fusion via in-process surface integrity improvement and phase change induced compressive residual stresses
2024 · Daniel Ordnung, Thibault Mertens, et al. · Additive manufacturing · 12
PDF
High-fidelity surrogate modelling for geometric deviation prediction in laser powder bed fusion using in-process monitoring data
2025 · Zhengrui Tao, Mirko Sinico, et al. · Virtual and Physical Prototyping · 8
Improving the dimensional accuracy of downfacing surfaces of additively manufactured parts
2019 · Paggi, Umberto, Sinico, Mirko, et al. · Lirias · 7
PDF
Unravelling the dependency of dross formations in metal additively manufactured channels as a function of channel diameter and inclination angle
2023 · Markus Baier, Mirko Sinico, et al. · CIRP journal of manufacturing science and technology · 5
PDF
Additive manufacturing in aluminium of a primary mirror for a CubeSat application: manufacture, testing, and evaluation
2025 · Ilhan Aziz, Younes Chahid, et al. · Astronomical Optics: Design, Manufacture, and Test of Space and Ground Systems · 3
Enhancing Fatigue Life of Metal Parts Produced by High-Speed Laser Powder Bed Fusion Through In Situ Surface Quality Improvement
2025 · Daniel Ordnung, Mirko Sinico, et al. · Journal of Manufacturing and Materials Processing · 3
PDF
Magnetic properties of as-built and heat treated M789 and M300 maraging steels produced via laser powder bed fusion
2024 · Valentin Mateev, Mirko Sinico, et al. · Next Materials · 3
A Mold Insert Case Study on Topology Optimized Design for Additive Manufacturing
2019 · Sinico, M., Ranjan, R., et al. · Lirias · 3
PDF
L0 Regularized Image Deblurring applied to Porosity Analysis in Industrial X-ray Computed Tomography
2022 · Dong Wu, Patricio Guerrero, et al. · e-Journal of Nondestructive Testing · 1
PDF
Improving the manufacturability of metal AM parts
2019 · Mirko Sinico, Rajit Ranjan, et al. · Lirias · 1
PDF
A Study on Pressurized Sensing Channels in LPBF A205 Aerospace Components for Fatigue-Driven Structural Health Monitoring
2026 · Sinico, Mirko, Lenaerts, Brecht, et al. · Lirias
PDF
Local pore prediction in laser powder bed fusion of metals using dual off-axis photodiode monitoring and spatiotemporal deep learning
2026 · Zhengrui Tao, Nicolò Bonato, et al. · Additive manufacturing
PDF
Laser Remelting for Reduced Porosity on Additively Manufactured Aluminium Mirrors
2026 · West, Joshua, Oyarzun, Valentina, et al. · arXiv (Cornell University)
PDF
Laser remelting for reduced porosity on additively manufactured aluminium mirrors
2026 · Joshua West, Valentina Oyarzun, et al. · Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation V
Data supporting the publication - Laser Remelting for Reduced Porosity on Additively Manufactured Aluminium Mirrors
2026 · Atkins, Carolyn, West, Joshua, et al. · Science and Technology Facilities Council
Improving centre of rotation correction for Helical CT
2026 · Jha, Saurabh, Sinico, Mirko, et al. · Lirias (KU Leuven)
PDF
Works count: 47
Citation count: 270
H-index: 10
I10-index: 10
Year
Topic
Type