Get started
Author

Lokeswar Patnaik

Observed names: LOKESWAR PATNAIK, Patnaik, Lokeswar
ORCID: 0000-0003-3527-0687
Observed ORCID: 0000-0003-3527-0687
OpenAlex ID: A5054362697
Comprehensive structural, nanomechanical and tribological evaluation of silver doped DLC thin film coating with chromium interlayer (Ag-DLC/Cr) for biomedical application
2020 · Lokeswar Patnaik, Saikat Ranjan Maity, et al. · Ceramics International · 93
Status of nickel free stainless steel in biomedical field: A review of last 10 years and what else can be done
2020 · Lokeswar Patnaik, Saikat Ranjan Maity, et al. · Materials Today Proceedings · 90
Processing and evaluation of nano SiC reinforced aluminium composite synthesized through ultrasonically assisted stir casting process
2023 · V.S.S. Venkatesh, Ganji Prabhakara Rao, et al. · Journal of Materials Research and Technology · 82
Friction and tribological behavior of bare nitrided, TiAlN and AlCrN coated MDC-K hot work tool steel
2020 · Sunil Kumar, Saikat Ranjan Maity, et al. · Ceramics International · 80
Effect of tribological process parameters on the wear and frictional behaviour of Cr-(CrN/TiN) composite coating: An experimental and analytical study
2021 · Sunil Kumar, Saikat Ranjan Maity, et al. · Ceramics International · 42
Analysis of physical, mechanical and tribological behavior of Al7075-fly ash composite for lightweight applications
2023 · Abhijit Bhowmik, Raman Kumar, et al. · International Journal on Interactive Design and Manufacturing (IJIDeM) · 41
Effect of heat treatment and TiN coating on AISI O1 cold work tool steel
2020 · Sunil Kumar, Saikat Ranjan Maity, et al. · Materials Today Proceedings · 40
Mechanical and tribological assessment of composite AlCrN or a-C:Ag-based thin films for implant application
2020 · Lokeswar Patnaik, Saikat Ranjan Maity, et al. · Ceramics International · 38
Optimization of surface roughness and material removal rate in milling of AISI 1005 carbon steel using Taguchi approach
2019 · Sunil Kumar, I. Saravanan, et al. · Materials Today Proceedings · 36
A comparative study on wear behaviors of hot work and cold work tool steel with same hardness under dry sliding tribological test
2021 · Sunil Kumar, Saikat Ranjan Maity, et al. · Materials Today Proceedings · 29
Modeling of wear parameters and multi-criteria optimization by Box-Behnken design of AlCrN thin film against gamma-irradiated Ti6Al4V counterbody
2021 · Lokeswar Patnaik, Saikat Ranjan Maity, et al. · Ceramics International · 28
Effect of lubricated sliding wear against CFRPEEK on the nanomechanical properties of Ag alloyed Cr/DLC thin film
2021 · Lokeswar Patnaik, Saikat Ranjan Maity, et al. · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · 24
Die casting parameters and simulations for crankcase of automobile using MAGMAsoft
2019 · Lokeswar Patnaik, I. Saravanan, et al. · Materials Today Proceedings · 23
Morphology and Wear Behavior of Monolayer TiAlN and Composite AlCrN/TiAlN-Coated Plasma-Nitrided DAC-10 Tool Steel
2022 · Sunil Kumar, Saikat Ranjan Maity, et al. · Arabian Journal for Science and Engineering · 21
Application of Integrated BWM Fuzzy-MARCOS Approach for Coating Material Selection in Tooling Industries
2022 · Sunil Kumar, Shubrajit Bhaumik, et al. · Materials · 19
PDF
Wear Parameter Optimization of Ceramic Coating Using the Fuzzy Integrated PSI-CODAS Decision-Making Framework
2022 · Sunil Kumar, Saikat Ranjan Maity, et al. · Arabian Journal for Science and Engineering · 19
Lubricated sliding of CFRPEEK/AlCrN film tribo-pair and its effect on the mechanical properties and structural integrity of the AlCrN film
2021 · Lokeswar Patnaik, Saikat Ranjan Maity, et al. · Materials Chemistry and Physics · 18
Wear assessment of Cr 2 O 3 ‐/TiAlN‐coated DAC‐10 tool steel against steel and Al 2 O 3 counterbodies
2021 · Sunil Kumar, Saikat Ranjan Maity, et al. · International Journal of Applied Ceramic Technology · 17
DLC/CrN or AlCrN/CrN composite films: The better candidate in terms of anti-Wear performance and lesser ion release in hip implant
2021 · Lokeswar Patnaik, Saikat Ranjan Maity, et al. · Materials Today Proceedings · 17
Coating material selection for bulk metal forming dies: A MEREC-integrated approach with multiple MCDM methods
2024 · Sunil Kumar, P. V. Ahijith Kumar, et al. · International Journal on Interactive Design and Manufacturing (IJIDeM) · 16
Optimization of Wear Parameters for Duplex-TiAlN Coated MDC-K Tool Steel Using Fuzzy MCDM Techniques
2022 · Sunil Kumar, Saikat Ranjan Maity, et al. · Operational Research in Engineering Sciences Theory and Applications · 16
Effect of annealing on structural, mechanical and tribological properties of Cr-(CrN/TiAlN) coating
2021 · Sunil Kumar, Saikat Ranjan Maity, et al. · Advances in Materials and Processing Technologies · 16
Wear parameter optimization for CrN/TiAlSiN coating using novel BWM integrated TODIM decision-making approach
2022 · Sunil Kumar, Lokeswar Patnaik, et al. · International Journal on Interactive Design and Manufacturing (IJIDeM) · 15
A novel BWM integrated MABAC decision-making approach to optimize the wear parameter of CrN/TiAlSiN coating
2022 · Sunil Kumar, Saikat Ranjan Maity, et al. · Journal of Industrial and Management Optimization · 15
PDF
Mechanical and Scratch behaviour of TiAlN Coated and 3D Printed H13 Tool Steel
2021 · Sunil Kumar, Saikat Ranjan Maity, et al. · Advances in Materials and Processing Technologies · 15
Works count: 76
Citation count: 998
H-index: 17
I10-index: 30
Year
Topic
Type