Get started
Author

Utpal Borah

A thermo-viscoplastic constitutive model to predict elevated-temperature flow behaviour in a titanium-modified austenitic stainless steel
2009 · Dipti Samantaray, Sumantra Mandal, et al. · Materials Science and Engineering A · 213
Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy
2016 · S.S. Satheesh Kumar, T. Raghu, et al. · Journal of Alloys and Compounds · 187
Work hardening characteristics and microstructural evolution during hot deformation of a nickel superalloy at moderate strain rates
2017 · S.S. Satheesh Kumar, T. Raghu, et al. · Journal of Alloys and Compounds · 127
Evolution of microstructure and microtexture during hot deformation in an advanced P/M nickel base superalloy
2018 · S.S. Satheesh Kumar, T. Raghu, et al. · Materials Characterization · 98
Constitutive modeling for predicting peak stress characteristics during hot deformation of hot isostatically processed nickel-base superalloy
2015 · S. S. Satheesh Kumar, T. Raghu, et al. · Journal of Materials Science · 92
A new critical point on the stress-strain curve: Delineation of dynamic recrystallization from grain growth
2016 · B Aashranth, M Arvinth Davinci, et al. · Materials & Design · 64
Influence of nitrogen on kinetics of dynamic recrystallization in Fe-Cr-Ni-Mo steel
2018 · Santosh Kumar, B. Aashranth, et al. · Vacuum · 55
Effect of plasma spraying parameter on wear resistance of NiCrBSiCFe plasma coatings on austenitic stainless steel at elevated temperatures at various loads
2011 · N.L. Parthasarathi, Muthukannan Duraiselvam, et al. · Materials & Design (1980-2015) · 45
Effect of temperature on sliding wear of AISI 316 L(N) stainless steel – Analysis of measured wear and surface roughness of wear tracks
2013 · N.L. Parthasarathi, Utpal Borah, et al. · Materials & Design (1980-2015) · 41
Effect of the tracing speed and span on roughness parameters determined by stylus type equipment
2013 · M. Arvinth Davinci, N.L. Parthasarathi, et al. · Measurement · 32
Dependency of rate sensitive DRX behaviour on interstitial content of a Fe-Cr-Ni-Mo alloy
2018 · Santosh Kumar, Dipti Samantaray, et al. · Materials Science and Engineering A · 29
Estimation of springback in double-curvature forming of plates: Experimental evaluation and process modeling
2007 · Utpal Borah, Shreedhar Venugopal, et al. · International Journal of Mechanical Sciences · 21
Flow Softening Index for Assessment of Dynamic Recrystallization in an Austenitic Stainless Steel
2017 · B. Aashranth, Dipti Samantaray, et al. · Journal of Materials Engineering and Performance · 20
Constitutive flow behavior of IFAC-1 austenitic stainless steel depicting strain saturation over a wide range of strain rates and temperatures
2013 · Dipti Samantaray, Alpesh Patel, et al. · Materials & Design (1980-2015) · 20
A micro-mechanism to explain the post-DRX grain growth at temperatures > 0.8Tm
2017 · B. Aashranth, Dipti Samantaray, et al. · Materials Characterization · 16
Development and Qualification of Materials for Indian Advanced Ultra-Supercritical Coal-Fired Power Plant
2021 · A. K. Bhaduri, Shaju K. Albert, et al. · Materials Performance and Characterization · 15
Influence of processing parameters on hot workability and microstructural evolution in a carbon–manganese–silicon steel
2015 · M. Arvinth Davinci, Dipti Samantaray, et al. · Materials & Design · 15
Assessing Constitutive Models for Prediction of High-Temperature Flow Behavior with a Perspective of Alloy Development
2018 · Santosh Kumar, B. Aashranth, et al. · Journal of Materials Engineering and Performance · 11
Influence of Stress Ratio and Contact Pressure on Fretting Fatigue Behavior of Modified 9Cr-1Mo Steel
2021 · V. Shiva, Sunil Goyal, et al. · Journal of Materials Engineering and Performance · 10
Role of grain boundary ferrite layer in dynamic recrystallization of semi-solid processed type 304L austenitic stainless steel
2016 · Dipti Samantaray, Atanu Chaudhuri, et al. · Materials Letters · 9
The effect of crystallographic orientation and interfaces on thermo-mechanical softening of a martensitic steel
2021 · B. Aashranth, Gyan Shankar, et al. · Journal of materials research/Pratt's guide to venture capital sources · 8
Plastic deformation of SS 316LN:Thermo-mechanical and microstructural aspects
2017 · Dipti Samantaray, Aashranth B, et al. · Procedia Engineering · 6
PDF
Assessing the Co-Deformability of a Nickel-Based Superalloy-304L Stainless Steel Preform Manufactured through Laser Additive Manufacturing
2021 · Dipti Samantaray, Bommakanti Aashranth, et al. · Journal of Materials Engineering and Performance · 5
Stretchability of Commercial Purity Titanium Sheet
2019 · Teena Mouni Chinapareddygari, Chandrasekaran Ravishankar, et al. · Metallurgical and Materials Transactions A · 5
Warm Working as a Potential Substitute for Hot Working of Austenitic Steel in Selected Applications
2019 · B. Aashranth, M. Arvinth Davinci, et al. · Materials Performance and Characterization · 4
Works count: 60
Citation count: 1,182
H-index: 15
I10-index: 19
Year
Topic
Type