Author

B. Abazadeh

Observed names: Abazadeh, Babak, B Abazadeh, Babak Abazadeh

Institution: University of Bonab

Observed institutions: University of Bonab, University of Tabriz

ORCID: 0000-0001-5743-2881

Observed ORCID: 0000-0001-5743-2881

OpenAlex ID: A5058723801

An investigation about interference fit effect on improving fatigue life of a holed single plate in joints

2010 · T.N. Chakherlou, M. Mirzajanzadeh, et al. · European Journal of Mechanics - A/Solids · 110

The effect of bolt clamping force on the fracture strength and the stress intensity factor of a plate containing a fastener hole with edge cracks

2008 · T.N. Chakherlou, B. Abazadeh, et al. · Engineering Failure Analysis · 108

An experimental investigation of the bolt clamping force and friction effect on the fatigue behavior of aluminum alloy 2024-T3 double shear lap joint

2011 · T.N. Chakherlou, M.J. Razavi, et al. · Materials & Design (1980-2015) · 91

Estimation of fatigue life for plates including pre-treated fastener holes using different multiaxial fatigue criteria

2010 · Tajbakhsh Navid Chakherlou, Babak Abazadeh · International Journal of Fatigue · 48

Investigation of the fatigue life and crack growth in torque tightened bolted joints

2010 · T.N. Chakherlou, M. Mirzajanzadeh, et al. · Aerospace Science and Technology · 46

Fatigue life estimation of bolt clamped and interference fitted-bolt clamped double shear lap joints using multiaxial fatigue criteria

2012 · Babak Abazadeh, T.N. Chakherlou, et al. · Materials & Design (1980-2015) · 44

Effect of interference fitting and/or bolt clamping on the fatigue behavior of Al alloy 2024-T3 double shear lap joints in different cyclic load ranges

2013 · Babak Abazadeh, T.N. Chakherlou, et al. · International Journal of Mechanical Sciences · 42

Finite element investigations of bolt clamping force and friction coefficient effect on the fatigue behavior of aluminum alloy 2024-T3 in double shear lap joint

2012 · T.N. Chakherlou, M.J. Razavi, et al. · Engineering Failure Analysis · 36

Investigating clamping force variations in Al2024-T3 interference fitted bolted joints under static and cyclic loading

2012 · T.N. Chakherlou, Babak Abazadeh · Materials & Design (1980-2015) · 31

Experimental and numerical investigations about the combined effect of interference fit and bolt clamping on the fatigue behavior of Al 2024-T3 double shear lap joints

2011 · T.N. Chakherlou, B. Abazadeh · Materials & Design (1980-2015) · 30

Selection of an appropriate non-destructive testing method for evaluating drilling-induced delamination in natural fiber composites

2021 · H. Rezghi Maleki, B. Abazadeh, et al. · NDT & E International · 20

An estimation of fatigue crack initiation and growth lives of Al 2024-T3 in double lap bolted joints with interference fitted holes

2019 · Babak Abazadeh, Farzin Azimpour Shishevan · Engineering Failure Analysis · 19

Effect of bolt clamping force on the fracture strength of mixed mode fracture in an edge crack with different sizes: Experimental and numerical investigations

2012 · T.N. Chakherlou, H.N. Maleki, et al. · Materials & Design (1980-2015) · 17

Investigating bolt clamping force effect on the mixed mode fracture strength and stress intensity factor for an edge crack in PMMA specimens

2011 · T.N. Chakherlou, H.N. Maleki, et al. · Materials Science and Engineering A · 14

Graphyne nano-spirals under tension: Effects of base structures on superelasticity and fracture mechanisms

2022 · Ali Narjabadifam, Babak Abazadeh, et al. · Mechanics of Materials · 8

Effect of bolt tightening on the fatigue behavior of GLARE double shear lap joints

2021 · B Abazadeh, HR Maleki · Journal of Composite Materials · 7

A novel strategy for comparative numerical analysis of the response of buried composite and steel pipes subjected to realistic loading scenarios: FEA in cooperation with Taguchi approach

2021 · Masoume Azizian, Mohammad Azizian, et al. · Engineering Failure Analysis · 6

Progressive failure analysis and taguchi-based optimisation of filament-wound composite tubes subjected to internal pressure using continuum damage mechanics approach

2022 · Masoume Azizian, Mohammad Azizian, et al. · Journal of Composite Materials · 5

Mode III analysis of a piezoelectric rectangular plane weakened by multiple cracks and cavities

2022 · B. Abazadeh, M. Samadi Darafshani · Theoretical and Applied Fracture Mechanics · 4

Torsional analysis of four-sided cross-sections coated by an orthotropic layer weakened by multiple defects

2021 · M. Samadi Darafshani, B. Abazadeh, et al. · Engineering Fracture Mechanics · 4

Several cracks in an orthotropic hollow cylinder coated by an MEE layer under torsion

2022 · B. Abazadeh, Ali Narjabadifam · Theoretical and Applied Fracture Mechanics · 2

Graphene-based Polymer Nano-composites - A Review

2020 · Farzin Azimpour Shishevan, B. Abazadeh · Mechanics of Advanced Composite Structures · 2

Fretting Fatigue Behavior Of Bolted Single Lap Joints Of Aluminum Alloys

2012 · Maleki, Hadi Rezghi, Abazadeh, Babak · Zenodo (CERN European Organization for Nuclear Research) · 2

Experimental and Numerical Investigations of the Effect of Bolt Position on the Mixed-Mode Fracture Strength of Edge Crack Specimens

2020 · H. N. Maleki, B. Abazadeh, et al. · Journal of Aerospace Engineering · 1

Investigating The Fatigue Crack Initiation Location In Interference Fitted And/Or Bolt Clamped Al 2024-T3 Double Shear Lap Joints

2012 · Abazadeh, Babak, Maleki, Hadi Rezghi · Zenodo (CERN European Organization for Nuclear Research) · 1

Works count: 27

Citation count: 698

H-index: 14

I10-index: 14