Get started
Author

Malek Habak

Experimental investigation of drilling damage and stitching effects on the mechanical behavior of carbon/epoxy composites
2014 · Yosra Turki, Malek Habak, et al. · International Journal of Machine Tools and Manufacture · 93
Machinability analysis of dry drilling of carbon/epoxy composites: cases of exit delamination and cylindricity error
2016 · M. F. Ameur, M. Habak, et al. · The International Journal of Advanced Manufacturing Technology · 79
Study of the elaboration of a practical weldability window in magnetic pulse welding
2013 · R.N. Raoelison, N. Buiron, et al. · Journal of Materials Processing Technology · 71
An experimental study of the effect of high-pressure water jet assisted turning (HPWJAT) on the surface integrity
2011 · Malek Habak, Jean Lou Lebrun · International Journal of Machine Tools and Manufacture · 43
PDF
Experimental study of thrust force and surface quality when drilling hybrid stacks
2020 · Amani Mahdi, Yosra Turki, et al. · The International Journal of Advanced Manufacturing Technology · 38
PDF
Analysis and optimization of machining parameters in drilling woven carbon fiber reinforced polymer CFRP
2023 · Amani Mahdi, Souâd Makhfi, et al. · Materials Today Communications · 25
Highlighting cutting mechanisms encountered in carbon/epoxy composite drilling using orthogonal cutting
2017 · Y. Turki, M. Habak, et al. · The International Journal of Advanced Manufacturing Technology · 23
Explainable machine learning for enhancing predictive accuracy of cutting forces in hard turning processes
2024 · Dorbane Abdelhakim, Fouzi Harrou, et al. · The International Journal of Advanced Manufacturing Technology · 22
Experimental and numerical study of the mechanical behavior and kinetics of the martensitic transformation in 304L TRIP steel: applied to folding
2018 · Z. Sidhoum, R. Ferhoum, et al. · The International Journal of Advanced Manufacturing Technology · 13
A study of the influence of the metallurgical state on shear band and white layer generation in 100Cr6 steel: application to machining
2007 · Malek Habak, Jean-Lou Lebrun, et al. · AIP conference proceedings · 11
Assessment of Gap and Charging Voltage Influence on Mechanical Behaviour of Joints Obtained by Magnetic Pulse Welding
2012 · Buiron, N., Dos Santos, B., et al. · Technische Universität Dortmund Eldorado (Technische Universität Dortmund) · 10
PDF
Effect of tool geometry and cutting parameters on delamination and thrust forces in drilling CFRP/Al-Li
2016 · Souhail El Bouami, Malek Habak, et al. · AIP conference proceedings · 9
Investigation of Temperature at Al/Glass Fiber-Reinforced Polymer Interfaces When Drilling Composites of Different Stacking Arrangements
2024 · Brahim Salem, Ali Mkaddem, et al. · Polymers · 8
Towards an Advanced Modeling of Hybrid Composite Cutting: Heat Discontinuity at Interface Region
2023 · Brahim Salem, Ali Mkaddem, et al. · Polymers · 8
PDF
Modeling of Machining Force in Hard Turning Process
2018 · Souâd MAKHFI, Kamel HADDOUCHE, et al. · Mechanika · 7
PDF
Tool geometry optimization for drilling CFRP/Al-Li stacks with a lightning strike protection
2017 · Souhail El Bouami, Malek Habak, et al. · AIP conference proceedings · 7
An Experimental Study of Drilling Parameters Effect on Composite Carbon/Epoxy Damage
2013 · Yosra Turki, Malek Habak, et al. · Key engineering materials · 7
Etude de l'influence de la microstructure et des paramètres de coupe sur le comportement en tournage dur de l'acier à roulement 100Cr6
2006 · Malek Habak · HAL · 6
Residual Stress in High-Pressure Water Jet Assisted Turning of Austenitic Stainless Steel
2006 · Malek Habak, Jean Lu Lebrun, et al. · Materials science forum · 6
Prediction of Cutting Forces Using ANNs Approach in Hard Turning of AISI 52100 steel
2011 · Soua^d Makhfi, Malek Habak, et al. · AIP conference proceedings · 5
Investigation on the constraint effect on the fracture toughness assessment of stainless steel AISI 304L thin sheets
2020 · Rachid Bensaada, Madjid Almansba, et al. · Journal of Theoretical and Applied Mechanics/Mechanika Teoretyczna i Stosowana · 4
PDF
An Optimized ANN Approach for Cutting Forces Prediction in AISI 52100 Bearing Steel Hard Turning
2013 · Raphaël Velasco, Malek Habak, et al. · 4
A Combined Experimental–Numerical Approach for Modeling Anisotropic Martensitic Transformation in TRIP 304L Steel under Tension and Bending
2025 · Amar Boudedja, Madjid Almansba, et al. · Journal of Materials Engineering and Performance · 3
Effectiveness of Digital Image Correlation in Capturing the Fracture Toughness in 304L Stainless Steel
2025 · Mokhtar Bencherif, Madjid Almansba, et al. · Journal of Failure Analysis and Prevention · 3
Thermal Aging Effect on the Compression Behavior of Thermoplastic Polymers—Proposed Phenomenological Model
2023 · Aghilas Hannou, Rabah Ferhoum, et al. · Journal of Failure Analysis and Prevention · 3
Works count: 52
Citation count: 524
H-index: 10
I10-index: 11
Year
Topic
Type