Get started
Author

Chandrakant Kumar Nirala

Observed names: C K Nirala, C. K. Nirala, C.K. Nirala, Chandrakant K Nirala, Chandrakant K. Nirala, Chandrakant Nirala
ORCID: 0000-0001-9951-5781
Observed ORCID: 0000-0001-9951-5781
OpenAlex ID: A5061178345
Sustainable cooling strategies to reduce tool wear, power consumption and surface roughness during ultrasonic assisted turning of Ti-6Al-4V
2022 · Jay Airao, Chandrakant K. Nirala, et al. · Tribology International · 157
Novel sustainable cryo-lubrication strategies for reducing tool wear during ultrasonic-assisted turning of Inconel 718
2022 · Navneet Khanna, Jay Airao, et al. · Tribology International · 72
Novel use of ultrasonic-assisted turning in conjunction with cryogenic and lubrication techniques to analyze the machinability of Inconel 718
2022 · Jay Airao, Chandrakant K. Nirala, et al. · Journal of Manufacturing Processes · 53
Accuracy and quality of micro-holes in vibration assisted micro-electro-discharge drilling of Inconel 718
2018 · Deepak Rajendra Unune, Chandrakant Kumar Nirala, et al. · Measurement · 49
Comparative analysis of tool wear in micro-milling of wrought and selective laser melted Ti6Al4V
2023 · Jay Airao, Hreetabh Kishore, et al. · Wear · 46
Measurement and analysis of tool wear and surface characteristics in micro turning of SLM Ti6Al4V and wrought Ti6Al4V
2022 · Jay Airao, Hreetabh Kishore, et al. · Measurement · 46
Tool wear reduction in machining Inconel 718 by using novel sustainable cryo-lubrication techniques
2022 · Jay Airao, Navneet Khanna, et al. · Tribology International · 46
Sustainability analysis of new hybrid cooling/lubrication strategies during machining Ti6Al4V and Inconel 718 alloys
2023 · Navneet Khanna, Jay Airao, et al. · Sustainable materials and technologies · 44
Precise μEDM-drilling using real-time indirect tool wear compensation
2016 · C.K. Nirala, P. Saha · Journal of Materials Processing Technology · 44
ANN-NSGA-II dual approach for modeling and optimization in abrasive mixed electro discharge diamond grinding of Monel K-500
2018 · Deepak Rajendra Unune, Chandrakant Kumar Nirala, et al. · Engineering Science and Technology an International Journal · 37
PDF
Experimental investigation of micro-pillar textured WC inserts during turning of Ti6Al4V under various cutting fluid strategies
2024 · Gaurav Saraf, Chandrakant K. Nirala · Journal of Manufacturing Processes · 36
Evaluation of μEDM-drilling and μEDM-dressing performances based on online monitoring of discharge gap conditions
2015 · C. K. Nirala, P. Saha · The International Journal of Advanced Manufacturing Technology · 35
Multiphysics modelling and high-speed imaging-based validation of discharge plasma in micro-EDM
2023 · Sohaib Raza, Hreetabh Kishore, et al. · CIRP journal of manufacturing science and technology · 29
Machinability analysis of Titanium 64 using ultrasonic vibration and vegetable oil
2022 · Jay Airao, Chandrakant K. Nirala · Materials and Manufacturing Processes · 27
Tool Wear Analysis during Ultrasonic Assisted Turning of Nimonic-90 under Dry and Wet Conditions
2021 · Jay Airao, Chandrakant K. Nirala, et al. · Metals · 26
PDF
Thermal modeling of single discharge in prospect of tool wear compensation in μEDM
2020 · Rahul Nadda, Chandrakant Kumar Nirala · The International Journal of Advanced Manufacturing Technology · 26
A New Approach of Tool Wear Monitoring and Compensation in RµEDM Process
2015 · C. K. Nirala, P. Saha · Materials and Manufacturing Processes · 25
Machinability of Ti-6Al-4V and Nimonic-90 in ultrasonic-assisted turning under sustainable cutting fluid
2022 · Jay Airao, Chandrakant K. Nirala · Materials Today Proceedings · 24
Machinability analysis of additively manufactured Ti6Al4V using micro-pillar textured tool under various cutting fluid strategies
2024 · Gaurav Saraf, Sharib Imam, et al. · Wear · 21
Sustainable approach for machining of Ti6Al4V using micro-pillar textured turning tool insert
2024 · Gaurav Saraf, Ninad Hari Sutrave, et al. · Sustainable materials and technologies · 21
Novel texture pattern on WC inserts fabricated using reverse-μEDM for enhanced cutting of Ti6Al4V
2023 · Gaurav Saraf, Chandrakant K. Nirala · Manufacturing Letters · 18
Finite Element Modeling and Experimental Validation of Tool Wear in Hot-Ultrasonic-Assisted Turning of Nimonic 90
2022 · Jay Airao, Chandrakant K. Nirala · Journal of Vibration Engineering & Technologies · 18
Feasibility demonstration of µEDM for fabrication of arrayed micro pin-fins of complex cross-sections
2019 · Hreetabh Kishore, Chandrakant K. Nirala, et al. · Manufacturing Letters · 18
Surface integrity in ultrasonic-assisted turning of Ti6Al4V using sustainable cutting fluid
2022 · Jay Airao, Chandrakant K. Nirala, et al. · Procedia CIRP · 17
PDF
Real-time data acquisition and discharge pulse analysis in controlled RC circuit based Micro-EDM
2023 · S. Raza, R. Nadda, et al. · Microsystem Technologies · 16
Works count: 83
Citation count: 1,292
H-index: 20
I10-index: 40
Year
Topic
Type