Get started
Author

Кожус Ольга Геннадьевна

Observed names: Kozhus Olga Gennadievna, O Kozhus, O. G. Kozhus, O. Kozhus, O.G. KOZHUS, O.G. Kozhus, Olga G. Kozhus, Olga Kozhus, Ольга Геннадьевна Кожус, Ольга Геннадьевна Кожус, Ольга Кожус
ORCID: 0000-0002-5942-652X
Observed ORCID: 0000-0002-5942-652X
OpenAlex ID: A5063010401
Quality of Hydroabrasive Waterjet Cutting Machinability
2017 · G. Barsukov, T. Zhuravleva, et al. · Procedia Engineering · 13
PDF
Increasing Of Efficiency Of Environmentally Friendly Technology Of AWJ Of A Glass Fiber Plastic
2017 · G Barsukov, T Zhuravleva, et al. · IOP Conference Series Earth and Environmental Science · 12
PDF
Methodics of Quality of Hydroabrasive Waterjet Cutting Machinability Assessment
2018 · G. Barsukov, T. Zhuravleva, et al. · Lecture notes in mechanical engineering · 9
Study of the effect of heat treatment of copper slag particles on abrasiveness for abrasive waterjet cutting
2023 · Gennady Barsukov, Tatyana Zhuravleva, et al. · The International Journal of Advanced Manufacturing Technology · 8
PDF
Water-Jet Cutting of Fiberglass Sheet
2020 · G. V. Barsukov, T. A. Zhuravleva, et al. · Russian Engineering Research · 7
Technology of Powder Coatings Application by Gas-Flame Spraying Using Oxyhydrogen Flame
2017 · G. Barsukov, V.V. Barabash, et al. · Materials science forum · 7
Modeling of Surfactant Influence on Liquid Velocity in the Channel of the Focusing Tube of the Nozzle of a Waterjet Unit
2024 · O. Kozhus, G. Barsukov, et al. · Lecture notes in mechanical engineering · 5
The research of the agglomeration process during the formation of an abrasive-polymer compound for waterjet cutting in a fluidized bed installation
2021 · Olga Kozhus, Gennady Barsukov · The International Journal of Advanced Manufacturing Technology · 5
PDF
Theoretical substantiation of formation of a layer of surfactants on the walls of the nozzle focusing tube for the technological process of waterjet cutting
2024 · Olga Kozhus, Gennady Barsukov, et al. · AIP conference proceedings · 4
Analysis of surfactant layer formation in the nozzle channel of a waterjet cutting machine
2024 · O. G. Kozhus, A.L. Galinovskiy, et al. · All the materials Encyclopedic Reference Book · 3
Modeling and searching for optimal solutions for water jet cutting process control
2022 · Galinovsky Andrey Leonidovich, Barsukov Gennady Valerievich, et al. · AIP conference proceedings · 3
Obtaining the Dependences of the Contact of the Composite Abrasive Material with the Nozzle Walls, which Reduces the Wear of the Focusing Tube of the Waterjet Installation
2021 · Olga G. Kozhus, Gennady V. Barsukov, et al. · Materials science forum · 3
Features of Applying the Polymer to the Surface of the Abrasive Grain to Improve the Efficiency of Waterjet Cutting
2021 · O.G. KOZHUS, G.V. BARSUKOV, et al. · Fundamental and Applied Problems of Engineering and Technology · 3
The Research and Simulation (Modelling) of the Destruction of a Single Abrasive Particle during Waterjet Cutting
2020 · Gennady V. Barsukov, Tatiana A. Zhuravleva, et al. · Materials science forum · 3
Innovation Cutting Technologies With Supersonic Liquid Jet: Economy, Market, State and Development Outlooks
2017 · Ольга Кожус, Елена Степанова, et al. · Bulletin of Bryansk state technical university · 3
PDF
Analysis of the Properties of the Fluidized Bed during the Formation of the Abrasive-Polymer Compound for Waterjet Cutting
2022 · Gennady V. Barsukov, Olga G. Kozhus, et al. · Key engineering materials · 2
Development of Abrasive Grain Coating Technology Protective Polymer Casing for Water-Abrasive Cutting
2021 · O.G. Kozhus · Materials research proceedings · 2
PDF
Improving the Efficiency of the Installation for Applying the Polymer Shell to the Abrasive Under Critical Technological Conditions
2021 · O.G. KOZHUS, G.V. BARSUKOV, et al. · Fundamental and Applied Problems of Engineering and Technology · 2
Modeling of the Contact Interaction of an Abrasive with the Walls of a Waterjet Machine Nozzle when Introducing Surfactants
2025 · O. G. Kozhus, G. V. Barsukov, et al. · Journal of Machinery Manufacture and Reliability · 1
Modeling of waterjet flow with surfactant in nozzle channel of waterjet ma-chine
2025 · O.G. Kozhus, G.V. Barsukov, et al. · All the materials Encyclopedic Reference Book · 1
Optimization of Parameters of Equipment Components for Hydroabrasive Cutting, Providing Increasing Treatment Efficiency
2020 · G.V. BARSUKOV, Yu.S. STEPANOV, et al. · Fundamental and Applied Problems of Engineering and Technology · 1
Calculation of Contact of Composite Abrasive With Nozzle Walls, Ensuring Reducing the Wear of the Focusing Tube of an Abrasive Waterjet Installation
2020 · G.V. BARSUKOV, V.S. SHORKIN, et al. · Fundamental and Applied Problems of Engineering and Technology · 1
Finite Element Modeling of Selective Liberation of Copper Slag Under Impact Crushing
2026 · Gennady Barsukov, Alexander Fetisov, et al. · Recycling
Constructing a Crack Model for a Selective Fracture of Copper Slag Particles Intended for Abrasive Waterjet Cutting
2026 · G. V. Barsukov, D. O. Dorokhov, et al. · Journal of Machinery Manufacture and Reliability
Study of Flow Features of Abrasive Particles During Polymer Coating Formation to Ensure the Stability of Underwater Hydroabrasive Cutting
2026 · Gennady Barsukov, Olga Kozhus, et al. · Transport engineering
Works count: 41
Citation count: 98
H-index: 6
I10-index: 2
Year
Topic
Type