Get started
Author

Celalettin Yüce

Observed names: C. Yuce, C. Yüce, Celalettin YUCE, Celalettin Yuce, Celalettin YÜCE, Yuce, Celalettin, YÜCE, CELALETTİN, YÜCE, Celalettin, Yüce, CELALETTİN, Yüce, Celalettin
ORCID: 0000-0003-1387-907X
Observed ORCID: 0000-0003-1387-907X
OpenAlex ID: A5063364488
The optimisation of process parameters for friction stir spot-welded AA3003-H12 aluminium alloy using a Taguchi orthogonal array
2014 · Mumin Tutar, Hakan Aydin, et al. · Materials & Design (1980-2015) · 140
Effects of rim thickness and drive side pressure angle on gear tooth root stress and fatigue crack propagation life
2021 · Oğuz Doğan, Celalettin Yuce, et al. · Engineering Failure Analysis · 58
Experimental measurement and numerical validation of single tooth stiffness for involute spur gears
2019 · Fatih Karpat, Celalettin Yuce, et al. · Measurement · 57
An improved numerical method for the mesh stiffness calculation of spur gears with asymmetric teeth on dynamic load analysis
2017 · Fatih Karpat, Oguz Dogan, et al. · Advances in Mechanical Engineering · 46
Multi-Objective Optimization of Fiber Laser Cutting of Stainless-Steel Plates Using Taguchi-Based Grey Relational Analysis
2023 · Yusuf Alptekin Turkkan, Muhammed Aslan, et al. · Metals · 36
PDF
Investigations on the microstructure and mechanical properties of laser welded dissimilar galvanized steel–aluminum joints
2019 · Celalettin Yuce, Fatih Karpat, et al. · The International Journal of Advanced Manufacturing Technology · 32
Effects of process parameters on surface quality and mechanical performance of 316L stainless steel produced by selective laser melting
2023 · Barış Şener, Oktay Çavuşoğlu, et al. · Optik · 28
A Case Study: Designing for Sustainability and Reliability in an Automotive Seat Structure
2014 · Celalettin Yuce, Fatih Karpat, et al. · Sustainability · 28
PDF
Effects of tooth root cracks on vibration and dynamic transmission error responses of asymmetric gears: A comparative study
2023 · Onur Can Kalay, Oğuz Doğan, et al. · Mechanics Based Design of Structures and Machines · 25
Prognostics and Health Management of Wind Energy Infrastructure Systems
2022 · Celalettin Yüce, Ozhan Gecgel, et al. · ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems Part B Mechanical Engineering · 25
The Optimization of Process Parameters and Microstructural Characterization of Fiber Laser Welded Dissimilar HSLA and MART Steel Joints
2016 · Celalettin Yuce, Mumin Tutar, et al. · Metals · 25
PDF
A comparative experimental study on the impact strength of standard and asymmetric involute spur gears
2020 · Onur Can Kalay, Oğuz Doğan, et al. · Measurement · 23
Effect of process parameters on the mechanical behavior of Ti6Al4V alloys fabricated by laser powder bed fusion method
2024 · Niyazi Baskin, Celalettin Yuce · Journal of Materials Research and Technology · 21
The Effect of Process Parameters on the Microstructure and Mechanical Performance of Fiber Laser-Welded AA5182 Aluminium Alloys
2017 · Celalettin Yuce, Mumin Tutar, et al. · Strojniški vestnik – Journal of Mechanical Engineering · 21
PDF
Effects of asymmetric tooth profile on single-tooth stiffness of polymer gears
2022 · Celalettin Yuce, Oguz Dogan, et al. · Materials Testing · 15
Convolutional Neural Networks Based Rolling Bearing Fault Classification Under Variable Operating Conditions
2021 · Fatih Karpat, Onur Can Kalay, et al. · International Conference on Innovations in Intelligent Systems and Applications (INISTA) · 15
A novel design procedure for tractor clutch fingers by using optimization and response surface methods
2016 · Oguz Dogan, Fatih Karpat, et al. · Journal of Mechanical Science and Technology · 15
Multi-response optimization for laser transmission welding of PMMA to ABS using Taguchi-based TOPSIS method
2023 · Ayca Kucukoglu, Celalettin Yuce, et al. · Advances in Mechanical Engineering · 12
PDF
A Novel AI-Based Method for Spur Gear Early Fault Diagnosis in Railway Gearboxes
2020 · Fatih Karpat, Ahmet Emir Dirik, et al. · Innovations in Intelligent Systems and Applications Conference (ASYU) · 12
Effect of Rim Thickness on Tooth Root Stress and Mesh Stiffness of Internal Gears
2014 · F. Karpat, B. Engin, et al. · ASME International Mechanical Engineering Congress and Exposition (IMECE) · 12
Multi-objective optimisation for indentation rate, nugget diameter and tensile load in resistance spot welding using Taguchi-based grey relational analysis
2021 · Celalettin Yuce · International Journal of Materials and Product Technology · 11
Mechanical characterization and microstructure of fiber laser welded TWIP980 steel depending on welding speed and focal distance
2023 · Oktay Çavuşoğlu, Celalettin Yuce, et al. · Optik · 10
The Effect of Laser Beam Wobbling Mode on Weld Bead Geometry of Tailor Welded Blanks
2020 · Celalettin Yuce · Academic Perspective Procedia · 10
PDF
Improvement of Loading Capacity of Internal Spur Gear With Using Asymmetric Trochoid Profile
2017 · Tufan Gürkan Yılmaz, Oğuz Doğan, et al. · ASME International Mechanical Engineering Congress and Exposition (IMECE) · 10
Effect of Rotational Speed and Dwell Time on Mechanical Properties of Dissimilar AA1050-AA3105 Friction Stir Spot Welded Joints*
2014 · Hakan Aydin, Oguz Tuncel, et al. · Materials Testing · 10
Works count: 93
Citation count: 780
H-index: 15
I10-index: 25
Year
Topic
Type