Get started
Author

Khushahal Thool

Observed names: K. S. Thool, K. Thool, Khushahal Sunil Thool
ORCID: 0000-0001-5532-8079
Observed ORCID: 0000-0001-5532-8079
OpenAlex ID: A5064066728
X-ray Diffraction for the Determination of Residual Stress of Crystalline Material: An Overview
2022 · Arijit Lodh, Khushahal Thool, et al. · Transactions of the Indian Institute of Metals · 77
The role of crystallographic orientations on heterogeneous deformation in a zirconium alloy: A combined experimental and modeling study
2020 · Khushahal Thool, Anirban Patra, et al. · International Journal of Plasticity · 71
PDF
Microstructure and texture development in Ti-15V-3Cr-3Sn-3Al alloy – Possible role of strain path
2019 · Aman Gupta, Rajesh Kisni Khatirkar, et al. · Materials Characterization · 53
Critical deposition height for sustainable restoration via laser additive manufacturing
2018 · Santanu Paul, Ramesh Singh, et al. · Scientific Reports · 26
PDF
Experimental Characterization of Clad Microstructure and its Correlation with Residual Stresses
2017 · Santanu Paul, Khushahal Thool, et al. · Procedia Manufacturing · 24
PDF
Microstructural and Textural Evolution in Hexagonal Close-Packed Metals: The Case of Zirconium, Magnesium, and Titanium
2024 · Khushahal Thool, K. U. Yazar, et al. · Crystals · 23
Texture Development During Cold Rolling of a β-Ti Alloy: Experiments and Simulations
2021 · Aman Gupta, Rajesh Kisni Khatirkar, et al. · Metallurgical and Materials Transactions A · 23
Confirmation of Dynamically Recrystallized Grains in Hexagonal Zirconium through Local Internal Friction Measurements
2019 · K. S. Thool, K. V. Mani Krishna, et al. · Metallurgical and Materials Transactions A · 14
Uncovering the microstructural and precipitate evolution in the cryogenic temperature - Friction stir processed AA6xxx sheets
2024 · Aman Gupta, Preetham Alluri, et al. · Materials Characterization · 11
Investigating the influence of microstructure and tool rotation speed on the mechanical properties of friction stir processed AA5083 sheets
2024 · Preetham Alluri, Khushahal Thool, et al. · Materials Science and Engineering A · 10
Irradiation studies on a reactor pressure vessel steel using Fe+ ion
2019 · A Kedharnath, Apu Sarkar, et al. · Materials Research Express · 10
PDF
Anisotropic compression behavior of 316 L stainless steel at room and cryogenic temperatures: The influence of twinning and transformation mechanisms
2025 · Saurabh Pawar, K.U. Yazar, et al. · International Journal of Plasticity · 8
High-temperature flow behaviour of grain-oriented and non-grain-oriented electrical steel
2019 · Sushil K. Giri, A. Durgaprasad, et al. · Materials Science and Technology · 6
Deep learning-based automated phase segmentation of Zn-Al-Mg-Y microstructures
2025 · Khushahal Thool, Seo Wi-Geol, et al. · Materials Characterization · 4
Uncovering the Microstructural and Precipitates Behavior of the Friction Stir Processed AA6××× Sheet
2025 · Aman Gupta, Preetham Alluri, et al. · Metals and Materials International · 3
Evolution of Heterogeneous Microstructure and Mechanical Properties in Friction Stir-Processed AA6xxx Alloy: An Experimental and Deep-Learning Approach
2026 · Aman Gupta, Khushahal Thool, et al. · JOM · 1
Mechanistic understanding of texture gradients in friction stir processed AA6xxx sheets
2026 · Preetham Alluri, Khushahal Thool, et al. · International Journal of Mechanical Sciences
Orientation microscopy study of cryogenic-temperature friction stir processed AA6xxx sheet: microstructure and second phase particles evolution
2026 · Aman Gupta, Khushahal Thool, et al. · Han-guk hyeonmigyeong hakoeji/Applied microscopy
Effect of Build Direction in Direct Metal Laser Sintering (DMLS) of Inconel 718 on Microstructure and Mechanical Behavior
2019 · Sachin Alya, Chaitanya Vundru, et al. · ASME International Mechanical Engineering Congress and Exposition (IMECE)
Microstructures and Textures of Hot Rolled and Hot Rolled-Normalized 2.9 % Silicon Steel Sheets
2014 · M. M. Humane, K. S. Thool, et al. · Transactions of the Indian Institute of Metals
Works count: 20
Citation count: 364
H-index: 10
I10-index: 11
Year
Topic
Type