Get started
Author

Lakshmanan Selvarajan

Observed names: L Selvarajan, L. SELVARAJAN, L. Selvarajan, Selvarajan L, Selvarajan L.
ORCID: 0000-0003-3472-7374
Observed ORCID: 0000-0003-3472-7374
OpenAlex ID: A5064092856
Optimization of EDM process parameters in machining Si3N4–TiN conductive ceramic composites to improve form and orientation tolerances
2016 · L. Selvarajan, C. Sathiya Narayanan, et al. · Measurement · 76
Optimization of EDM Parameters on Machining Si3N4–TiN Composite for Improving Circularity, Cylindricity, and Perpendicularity
2015 · L. Selvarajan, C. Sathiya Narayanan, et al. · Materials and Manufacturing Processes · 69
Experimental investigation on surface morphology and recasting layer of Si3N4-TiN composites machined by die-sinking and rotary EDM
2022 · L. Selvarajan, R. Rajavel, et al. · Ceramics International · 66
Modelling and experimental investigation of process parameters in EDM of Si3N4-TiN composites using GRA-RSM
2017 · L. Selvarajan, M. Manohar, et al. · Journal of Mechanical Science and Technology · 65
Mechanical, tribological, and surface morphological studies on the effects of hybrid ilmenite and silicon dioxide fillers on glass fibre reinforced epoxy composites
2023 · K.P. Srinivasa Perumal, L. Selvarajan, et al. · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · 46
Optimization of Process Parameters to Improve Form and Orientation Tolerances in EDM of MoSi2-SiC Composites
2014 · L. Selvarajan, C. Sathiya Narayanan, et al. · Materials and Manufacturing Processes · 41
Effect of zircon and anatase titanium dioxide nanoparticles on glass fibre reinforced epoxy with mechanical and morphological studies
2023 · K.P. Srinivasa Perumal, R. Boopathi, et al. · Ceramics International · 36
The effects of zircon particles on the mechanical and morphological properties of glass fibre reinforced epoxy composite
2023 · K.P.Srinivasa Perumal, R. Boopathi, et al. · Materials Today Communications · 34
Optimization of EDM Hole Drilling Parameters in Machining of MoSi 2- SiC Intermetallic/Composites for Improving Geometrical Tolerances
2015 · L. Selvarajan, C. Sathiya Narayanan, et al. · Journal of Advanced Manufacturing Systems · 34
A Review Paper on EDM Parameter of Composite material and Industrial Demand Material Machining
2018 · L. Selvarajan, J. Rajavel, et al. · Materials Today Proceedings · 32
Enhancing mechanical and morphological properties of glass fiber reinforced epoxy polymer composites through rutile nanoparticle incorporation
2024 · K. P. Srinivasa Perumal, L. Selvarajan, et al. · Progress in Additive Manufacturing · 31
Investigation on spark electrical discharge machining of Si3N4 based advanced conductive ceramic composites
2019 · L. Selvarajan, R. Rajavel, et al. · Materials Today Proceedings · 31
A review of spark erosion machining efficiency, characterization and optimization techniques for ceramic composites
2023 · L. Selvarajan, K Venkataramanan, et al. · Composite Interfaces · 29
Surface morphology and drilled hole accuracy of conductive ceramic composites Si3N4–TiN and MoSi2–SiC on EDMed surfaces
2023 · L. Selvarajan, K. Venkataramanan · Wear · 28
PDF
Taguchi-Based Experimental Investigation and Modeling of 3D-Printed PEEK Parts as Biomedical Implants using Fused Deposition Modeling for Improving Mechanical Strength and Surface Quality
2023 · Jyotisman Borah, M. Chandrasekaran, et al. · Journal of Materials Engineering and Performance · 25
Simultaneous multi-response Jaya optimization and Pareto front visualization in EDM drilling of MoSi2-SiC composites
2023 · L. Selvarajan, K. Venkataramanan, et al. · Expert Systems with Applications · 25
EDM machining effectiveness for Ti–6Al–4V alloy using Cu–TiB2 ceramic composite electrode: a parametric evaluation
2024 · P. Mathan Kumar, K. Sivakumar, et al. · Ceramics International · 24
An experimental investigations and optimization of performance measures in EDM using copper and graphite electrodes
2020 · L. Selvarajan, R. Rajavel, et al. · Materials Today Proceedings · 23
Spark eroding machining performance, surface textures and optimization strategies for ceramic composites: a review
2025 · L. Selvarajan, K. Venkataramanan, et al. · Archives of Civil and Mechanical Engineering · 22
Si 3 N 4 –TiN conductive ceramic composites: topography on EDMed surfaces and precise drilled holes
2023 · L. Selvarajan, K. Venkataramanan · Materials Science and Technology · 21
Fuzzy logic optimization with regression analysis on EDM machining parameters of Si3N4-TiN ceramic composites
2023 · L. Selvarajan, K. Venkataramanan, et al. · Journal of Intelligent & Fuzzy Systems · 21
Spark erosion behavior in the machining of MoSi2–SiC ceramic composites for improving dimensional accuracy
2023 · Rami Alfattani, Mohammed Yunus, et al. · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · 20
The effect of rotary EDM parameters on the surface integrity and geometric parameters of holes in Si3N4-TiN electro conductive ceramics using DFA-RSM-ANN method
2024 · L. Selvarajan, K. Venkataramanan, et al. · Tribology International · 19
Study of Correlation of Machining Performance and Geometrical Tolerances of Si3N4-TiN Composites Using EDM Process
2024 · K. P. Manikandan, S. Thirugnanam, et al. · Silicon · 19
PDF
Si3N4-TiN rotary EDM optimization by Mo-Jaya algorithm with Pareto optimal solution, analysis of micro-structural and geometrical tolerances
2023 · L. Selvarajan, K. Venkataramanan, et al. · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · 19
Works count: 103
Citation count: 1,301
H-index: 21
I10-index: 44
Year
Topic
Type