Author

Kean Ong Low

Observed names: K O Low, K. O. LOW, K. O. Low, K.O. Low, K.O. Low ., KO Low, Kean O. Low

Institution: Multimedia University

Observed institutions: Multimedia University, University of Technology Malaysia

ORCID: 0000-0001-6124-9748

Observed ORCID: 0000-0001-6124-9748

OpenAlex ID: A5064179278

Adhesive wear and frictional performance of bamboo fibres reinforced epoxy composite

2011 · Umar Nirmal, Jamil Hashim, et al. · Tribology International · 228

Fracture characterisation of short bamboo fibre reinforced polyester composites

2010 · K.J. Wong, S. Zahi, et al. · Materials & Design (1980-2015) · 185

Influence of roller burnishing contact width and burnishing orientation on surface quality and tribological behaviour of Aluminium 6061

2006 · N.S.M. El-Tayeb, K.O. Low, et al. · Journal of Materials Processing Technology · 123

The effects of alkali treatment on the interfacial adhesion of bamboo fibres

2010 · K J Wong, B F Yousif, et al. · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · 113

On the surface and tribological characteristics of burnished cylindrical Al-6061

2008 · N.S.M. El-Tayeb, K.O. Low, et al. · Tribology International · 74

Influence of ball burnishing on surface quality and tribological characteristics of polymers under dry sliding conditions

2010 · K.O. Low, K.J. Wong · Tribology International · 67

Evaluation on tribological design coatings of Al2O3, Ni–P–PTFE and MoS2 on aluminium alloy 7075 under oil lubrication

2012 · K.W. Liew, S.Y. Chia, et al. · Materials & Design (1980-2015) · 53

Enhancement of Surface Quality and Tribological Properties Using Ball Burnishing Process

2008 · N. S. M. El-Tayeb, K. O. Low, et al. · Machining Science and Technology · 48

Mode I delamination behaviour of carbon/epoxy composite at different displacement rates

2019 · K.O. Low, S.M. Teng, et al. · Composites Part B Engineering · 42

Effects of fillers on the fracture behaviour of particulate polyester composites

2009 · K J Wong, B F Yousif, et al. · The Journal of Strain Analysis for Engineering Design · 41

Numerical simulation methodology for mode II delamination of quasi-isotropic quasi-homogeneous composite laminates

2017 · Mahzan Johar, Haris Ahmad Israr, et al. · Journal of Composite Materials · 33

On the effect of abrasiveness to process equipment using betelnut and glass fibres reinforced polyester composites

2012 · Umar Nirmal, K.O. Low, et al. · Wear · 33

Thickness-dependent non-Fickian moisture absorption in epoxy molding compounds

2016 · K.J. Wong, K.O. Low, et al. · Microelectronics Reliability · 28

Fracture behaviour of glass fibre-reinforced polyester composite

2009 · L W H Leonard, K J Wong, et al. · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · 28

Interlaminar fracture toughness of a plain weave flax/epoxy composite

2018 · T.S. Rajendran, M. Johar, et al. · Plastics Rubber and Composites Macromolecular Engineering · 23

Displacement rate effects on mixed-mode I/II delamination of laminated carbon/epoxy composites

2022 · Kean Ong Low, Mahzan Johar, et al. · Polymer Testing · 18

PDF

The effect of heat treatment duration on mechanical and tribological characteristics of Ni–P–PTFE coating on low carbon high tensile steel

2014 · K.W. Liew, H.J. Kong, et al. · Materials & Design (1980-2015) · 18

Displacement Rate Effects on the Mode II Shear Delamination Behavior of Carbon Fiber/Epoxy Composites

2021 · Kean Ong Low, Mahzan Johar, et al. · Polymers · 17

PDF

Study on the Scratch Hardness and Indentation Hardness of Burnished Poly(Oxymethylene) Surfaces

2009 · K. O. Low, N. S.M. El-Tayeb, et al. · Tribology Transactions · 17