Get started
Author

K. Pratheesh

Observed names: K Pratheesh, K. J. Pratheesh, K. PRATHEESH, K., Pratheesh, PRATHEESH KRISHNANKUTTY, Pratheesh K, Pratheesh K J, Pratheesh K., Pratheesh Krishnankutty, Pratheesh. K. J
ORCID: 0000-0002-3061-6733
Observed ORCID: 0000-0002-3061-6733
OpenAlex ID: A5064532315
Effects of Sr and pressure on microstructure, mechanical and wear properties of near eutectic Al–Si piston alloys
2015 · K. Pratheesh, M. Ravi, et al. · International Journal of Cast Metals Research · 22
Effect of corn husk fiber length and diameter on load bearing, fatigue, and DMA properties of biosilica toughened epoxy composite
2023 · Pratheesh K., Gurupranes S. V., et al. · Polymer Composites · 19
PDF
Cenosphere filled epoxy composites: structural, mechanical, and dynamic mechanical studies
2023 · K. Pratheesh, P. Narayanasamy, et al. · Biomass Conversion and Biorefinery · 14
Study on the Effects of Squeeze Pressure on Mechanical Properties and Wear Characteristics of near-Eutectic Al–Si–Cu–Mg–Ni Piston Alloy with Variable Cu Content
2017 · K. Pratheesh, Allesu Kanjirathinkal, et al. · International Journal of Metalcasting · 14
An improved space vector PWM method for a three-level inverter with reduced THD
2015 · Pratheesh. K. J, Jagadanand. G, et al. · IEEE International Conference on Compatibility, Power Electronics and Power Engineering · 13
Effects of Alkali-silane Surface-Grafted Pineapple Fiber on Lamina Delamination & Drilling Damage Behaviour of Hot-Water Ageing Composites
2024 · R. Meby Selvaraj, K Pratheesh, et al. · Silicon · 11
Study on the Effects of Squeeze Pressure on Mechanical Properties and Wear Characteristics of Near Eutectic Al–Si–Cu–Mg–Ni Piston Alloy with Variable Mg Content
2015 · K. Pratheesh, Allesu Kanjirathinkal, et al. · Transactions of the Indian Institute of Metals · 11
PVA/CSP/AgNPs hybrid biocomposite films: Optimization of process constraints using Taguchi-based grey relational analysis and functional property evaluation
2025 · Balavariavan Balasubramanian, Parrthipan Balasubramanian Karthekeyan, et al. · Journal of Thermoplastic Composite Materials · 10
Tensile strength prediction in monel 400 weldments using classification and regression algorithms in machine learning
2024 · Parrthipan Balasubramaniyan Karthekeyan, Narayanasamy Pandiarajan, et al. · Materials Research Express · 9
High Cycle Fatigue Properties of near eutectic Al Si Piston Alloy
2018 · Pratheesh Krishnankutty, Allesu Kanjirathinkal, et al. · Materials Today Proceedings · 9
Effect of Aging Time on Mechanical Properties and Wear Characteristics of Near Eutectic Al–Si–Cu–Mg–Ni Piston Alloy
2015 · Pratheesh Krishnankutty, Allesu Kanjirathinkal, et al. · Transactions of the Indian Institute of Metals · 9
Dry and wet sliding, fatigue, creep and mechanical properties of AA-7475 metal matrix composite reinforced with Si2N2O from rice husk ash
2024 · K. Pratheesh, Seeniappan Kaliappan, et al. · Journal of the Australian Ceramic Society · 8
Hybrid Entropy–Principal Component Analysis–Combined Compromise Solution Techniques for Optimizing Welding Parameters of Monel 400 and Validation via Machine Learning
2024 · Parrthipan Balasubramaniyan Karthekeyan, Narayanasamy Pandiarajan, et al. · Journal of Materials Engineering and Performance · 8
Effect of Silicon on Microstructure and Mechanical Properties of Al-Si Piston Alloys
2015 · Blesson Mathai, Cijo Mathew, et al. · International Journal of Engineering Trends and Technology · 8
Effect of silane-treated lignin and hybrid bamboo-green pea sheath fiber on mechanical, wear, and wettability behavior of epoxy structural composite
2024 · Ramasamy V, Dharmaraja C, et al. · Biomass Conversion and Biorefinery · 6
Characterisation of tensile fracture in squeeze casted Al–Si piston alloy
2021 · K. Pratheesh, M. Ravi, et al. · International Journal of Cast Metals Research · 6
Effect of Cutting Parameters and Cooling Conditions on Surface Roughness and Tool Wear in Turning Ti-6Al-4V Titanium Alloy on an All-Gear Lathe: A Full Factorial Experimental Study
2025 · D. Ananda Kumar, A. Murugarajan, et al. · Journal of Materials Engineering and Performance · 5
Mechanical, Tribological, Fatigue, and Creep Performance of Aa 7075 Composites Reinforced With Annealed and Functionalized Biosilica From Red Matta Rice Husk
2025 · K. PRATHEESH, SEENIAPPAN KALIAPPAN, et al. · Surface Review and Letters · 5
Reduced current harmonics in the NPC inverter with a novel space vector PWM
2015 · K. J. Pratheesh, G Jagadanand, et al. · IEEE International Conference on Signal Processing, Informatics, Communication and Energy Systems (SPICES) · 4
Effect of Squeeze Pressure and Strontium Addition on Tribological and Mechanical Properties of Al–Si Piston Alloy with Varying Amount of Ni
2023 · K. Pratheesh, V. V. Monikandan, et al. · Transactions of the Indian Institute of Metals · 3
A Generalized Space Vector Modulation Scheme Based on a Switch Matrix for Cascaded H-Bridge Multilevel Inverters
2018 · K. Pratheesh, G Jagadanand, et al. · Journal of Power Electronics · 3
Thermal and magnetic properties study of NiCo2O4/graphene and NiFe2O4/graphene
2022 · Manuel George, K. Pratheesh, et al. · Materials Today Proceedings · 2
Towards the Enhanced Mechanical and Tribological Properties and Microstructural Characteristics of Boron Carbide Particles Reinforced Aluminium Composites: A Short Overview
2021 · V. V. Monikandan, K. Pratheesh, et al. · Johnson Matthey Technology Review · 2
A simple and low cost generalised modulation technique for neutral point clamped multilevel inverters
2016 · Pratheesh K J, Jagadanand G, et al. · IEEE International Conference on Power Electronics, Drives and Energy Systems · 2
Machine learning enabled CRITIC–CoCoSO optimization of PVA/CSP/AgNPs films for multifunctional packaging applications
2026 · Balasubramanian Karthekeyan Parrthipan, Balavairavan Balasubramanian, et al. · Journal of Thermoplastic Composite Materials · 1
Works count: 30
Citation count: 207
H-index: 9
I10-index: 8
Year
Topic
Type