Get started
Author

Nabil Ben Fredj

Observed names: Ben Fredj, N., Ben Fredj, Nabil, N. Ben Fredj, Nabil BEN FREDJ, Nabil Ben FREDJ
ORCID: 0000-0001-6720-2377
Observed ORCID: 0000-0001-6720-2377
OpenAlex ID: A5065521740
Effects of abrasive type cooling mode and peripheral grinding wheel speed on the AISI D2 steel ground surface integrity
2008 · Brahim Ben Fathallah, Nabil Ben Fredj, et al. · International Journal of Machine Tools and Manufacture · 84
Effects of the cryogenic cooling on the fatigue strength of the AISI 304 stainless steel ground components
2006 · Nabil Ben Fredj, Habib Sidhom · Cryogenics · 79
Ground surface improvement of the austenitic stainless steel AISI 304 using cryogenic cooling
2005 · Nabil Ben Fredj, Habib Sidhom, et al. · Surface and Coatings Technology · 74
Ground surface roughness prediction based upon experimental design and neural network models
2006 · Nabil Ben Fredj, Ridha Amamou · The International Journal of Advanced Manufacturing Technology · 46
Effects of finishing processes on the fatigue life improvements of electro-machined surfaces of tool steel
2010 · Farhat Ghanem, Nabil Ben Fredj, et al. · The International Journal of Advanced Manufacturing Technology · 45
PDF
Improvement of AISI 304 austenitic stainless steel low-cycle fatigue life by initial and intermittent deep rolling
2018 · Naoufel Ben Moussa, Khouloud Gharbi, et al. · The International Journal of Advanced Manufacturing Technology · 42
Fatigue Life Improvements of the AISI 304 Stainless Steel Ground Surfaces by Wire Brushing
2004 · Nabil Ben Fredj, Mohamed Ben Nasr, et al. · Journal of Materials Engineering and Performance · 40
Improved method for grinding force prediction based on neural network
2007 · Ridha Amamou, Nabil Ben Fredj, et al. · The International Journal of Advanced Manufacturing Technology · 28
Role of machining defects and residual stress on the AISI 304 fatigue crack nucleation
2014 · H. Yahyaoui, N. Ben Moussa, et al. · Fatigue & Fracture of Engineering Materials & Structures · 25
PDF
Improvement of the corrosion behavior of AISI 304L stainless steel by deep rolling treatment under cryogenic cooling
2021 · Khouloud Gharbi, Naoufel Ben Moussa, et al. · The International Journal of Advanced Manufacturing Technology · 20
State of the Art and Challenges for Occupational Health and Safety Performance Evaluation Tools
2021 · Hajer Jemai, Adel Badri, et al. · Safety · 19
PDF
Surface roughness prediction based upon experimental design and neural network models
2003 · N. Ben Fredj, R. Amamou, et al. · Conference proceedings/Conference proceedings - IEEE International Conference on Systems, Man, and Cybernetics · 19
Effects of the cooling mode on the integrity and the multi-pass micro-scratching wear resistance of Hardox 500 ground surfaces
2021 · Kamel Bensaid, Hafedh Dhiflaoui, et al. · The International Journal of Advanced Manufacturing Technology · 18
Formation Mechanism of Finished Surface in Ultrahigh-Speed Grinding with cubic Boron Nitride (cBN) Wheels
2006 · Yoshio ICHIDA, Ryunosuke SATO, et al. · JSME International Journal Series C · 18
PDF
Assessing process capability index using sampling plan in the presence of measurement system errors
2019 · Adel Brik, Mohamed Goddi, et al. · The International Journal of Advanced Manufacturing Technology · 12
Process True Capability Evaluation with the Consideration of Measurement System Variability and Expected Quality Loss
2016 · Souha Ben Amara, Jamel Dhahri, et al. · Quality and Reliability Engineering International · 9
Numerical investigation of incremental forming process of AISI 304 stainless steel
2022 · Kamel Bensaid, Ridha Souissi, et al. · Ironmaking & Steelmaking Processes Products and Applications · 8
Process capability indices and X ¯ $$ \overline{X} $$ , R control chart limit adjustments by taking into account measurement system errors
2017 · Sarra Selmi, Souha Ben Amara, et al. · The International Journal of Advanced Manufacturing Technology · 8
Three-Dimensional Aeroelastic Investigation of a Novel Convex Bladed H-Darrieus Wind Turbine Based on a Two-Way Coupled Computational Fluid Dynamics and Finite Element Analysis Approach
2025 · Tarek Elbeji, Wael Ben Amira, et al. · Fluids · 7
Method for improving the measurement system selection depending on part and process precisions
2016 · Souha Ben Amara, Jamel Dhahri, et al. · Measurement · 7
Towards better understanding of the complex industrial systems: Case of production systems
2023 · Hajer Jemai, Adel Badri, et al. · International Review of Applied Sciences and Engineering · 6
PDF
An innovative contactless finite element simulation of the shot peening process
2021 · Iheb Chaieb, Naoufel Ben Moussa, et al. · The International Journal of Advanced Manufacturing Technology · 6
Effects of Jet Pressure on the Ground Surface Quality and CBN Wheel Wear in Grinding AISI 690 Nickel-Based Superalloy
2016 · Ahmed Guitouni, Iheb Chaieb, et al. · Journal of Materials Engineering and Performance · 6
Improvement of the corrosion behavior of AISI 304L stainless steel by deep rolling treatment under cryogenic cooling
2021 · Khouloud Gharbi, Naoufel Ben Moussa, et al. · Research Square · 5
PDF
Influence of Sliding Speed and Normal Loads on the Wear Resistance of Hardox 500 Steel Ground Surfaces
2020 · Kamel Bensaid, Nabil Ben Fredj · Lecture notes in mechanical engineering · 5
Works count: 53
Citation count: 675
H-index: 14
I10-index: 15
Year
Topic
Type