Get started
Author

Mahmoud Afshari

Observed names: Afshari, Mahmoud, MAHMOUD AFSHARI
ORCID: 0000-0002-8556-4264
Observed ORCID: 0000-0002-8556-4264
OpenAlex ID: A5066395686
Studying the effects of FDM process parameters on the mechanical properties of parts produced from PLA using response surface methodology
2024 · Hossein Afshari, Fatemeh Taher, et al. · Colloid & Polymer Science · 34
PDF
Investigating the effect of laser cladding parameters on the microstructure, geometry and temperature changes of Inconel 718 superalloy using the numerical and experimental procedures
2023 · Mahmoud Afshari, Hossein Ghadimi Hamzekolaei, et al. · Materials Today Communications · 30
Optimizing the mechanical properties of TiO2 / PA12 nano‐composites fabricated by SLS 3D printing
2022 · Mahmoud Afshari, Soroush Bakhshi, et al. · Polymer Engineering and Science · 28
An enhancement in the tensile modulus and bending resistance of polylactic acid/carbon nanotube composite by optimizing FFF process parameters
2024 · Hatam Hardani, Mahmoud Afshari, et al. · Journal of Thermoplastic Composite Materials · 21
Investigating the mechanical properties and microstructure of the weld joint obtained by laser welding of PA12 / CNT nanocomposites
2023 · Mohammad Reza Samadi, Mahmoud Afshari, et al. · Polymer Engineering and Science · 20
Optimization of FFF process parameters to improve the tensile strength and impact energy of polylactic acid/carbon nanotube composite
2024 · Hatam Hardani, Mahmoud Afshari, et al. · Polymer Engineering and Science · 18
Simultaneous enhancement of the impact strength and tensile modulus of PP/EPDM/TiO2 nanocomposite fabricated by fused filament fabrication
2023 · Fatemeh Taher, Mahmoud Afshari, et al. · Colloid & Polymer Science · 18
Friction stir welding of polypropylene based graphene nanocomposites fabricated with 3-D printing: An investigation on the microstructure and mechanical properties
2023 · Mahmoud Afshari, Hatam Hardani, et al. · Journal of Composite Materials · 18
A new approach to evaluation of bead geometry and cladded layer in laser additive manufacturing of Inconel 718 using the experimental design, inverse analysis and numerical simulation
2025 · Mahmoud Afshari, Mehrdad Khandaei, et al. · Optics & Laser Technology · 17
Prediction of the primary dendritic arm spacing in the laser metal deposition of Inconel 718 superalloy using the numerical and experimental techniques
2023 · Mahmoud Afshari, Mehrdad Khandaei, et al. · Journal of Laser Applications · 15
An investigation on the friction stir welding of PP/TiO2 nanocomposites for improving the tensile strength and hardness of the weld joint
2023 · Mohammad Reza Samadi, Mohsen Ayaz, et al. · Colloid & Polymer Science · 15
Optimizing the mechanical properties of weld joint in laser welding of GTD-111 superalloy and AISI 4340 steel
2022 · Mahmoud Afshari, Fatemeh Taher, et al. · Optics & Laser Technology · 13
Simultaneous optimization of the tensile strength, bending strength, hardness and wear resistance of W Cu composite produced by sintering process
2023 · Ehsan Selahshorrad, Ebrahim Zeynali, et al. · International Journal of Refractory Metals and Hard Materials · 12
Investigating the laser metal deposition of Inconel 718 superalloy using the numerical and experimental methods
2022 · Mahmoud Afshari, Mehrdad Khandaei, et al. · Laser Physics · 12
Investigating the effect of laser surface melting process parameters on thermal efficiency by reverse analysis and experimental design
2023 · Mahmoud Afshari, Mehrdad Khandaei, et al. · Journal of Nonlinear Optical Physics & Materials · 6
An enhancement of the yield strength and hardness in the friction stir welding of AZ31/AA3105 joint
2024 · Alireza Karimian Khozani, Seyyed Amirhossein Alavi, et al. · Journal of Adhesion Science and Technology · 4
Sintering parameter optimization by inverse analysis in direct metal deposition of Inconel 718
2024 · Mahmoud Afshari, Mehrdad Khandaei, et al. · Rapid Prototyping Journal · 4
Effect of process parameters on solidification microstructure in laser additive manufacturing of inconel 718 using A new approach of numerical analysis, inverse analysis and experimental design
2026 · Mahmoud Afshari, Mehrdad Khandaei, et al. · The International Journal of Advanced Manufacturing Technology · 3
PDF
Friction Stir Welding Process of AZ91 Mg and A319 Al Alloys for Improving the Impact Resistance, Hardness and Yield Strength of the Weld
2025 · Noushin Yasavol, Mohsen Ayaz, et al. · Journal of Materials Engineering and Performance · 3
Design and optimization of mechanical and electromagnetic properties of GFRP composite
2024 · Ehsan Talei-Fard, Hossein Parsa, et al. · Journal of Materials Science Materials in Electronics · 3
Investigation of the effect of sintering process parameters on the corrosion, wear and hardness of W–Cu composite
2024 · Ehsan Selahshorrad, Seyyed Amirhossein Alavi, et al. · Sadhana · 3
Optimizing the Mechanical Properties of the Weld in the Friction Stir Welding of Aluminum and Magnesium (A365–AZ91C)
2024 · Noushin Yasavol, Soroush Bakhshi, et al. · Journal of Advanced Manufacturing Systems · 3
Evaluation of the Effect of Process Parameters on Mass Efficiency in Direct Metal Deposition of Inconel 718 with Response Surface Methodology
2023 · Mahmoud Afshari, Mehrdad Khandaei, et al. · Research Square · 2
PDF
Mechanical and Formability Evaluation of ST14 Alloys Welded by Friction Stir Welding
2021 · Mahmoud Afshari, Nima Fakhralmobasheri, et al. · Shock and Vibration · 2
PDF
Improving the tensile and impact properties of laser welded joints between PP and HDPE/GNP
2026 · Mahmoud Afshari, Ali Khwaldeh, et al. · Journal of Composite Materials · 1
Works count: 54
Citation count: 316
H-index: 12
I10-index: 14
Year
Topic
Type