Get started
Author

Mohd Shahriman Adenan

Observed names: Adenan, Mohd Shahriman, M S Adenan, M. S. Adenan, M. Shahriman Adenan, M.S. Adenan, Mohd Shahriman Adenan, Mohd S. Adenan, Mohd Shahriman Adenan*, Mohd Shahriman Bin Adenan, Mohd Shahriman bin Adenan*, Mohd Shariman Adenan, Shahriman Adenan
ORCID: 0000-0002-1016-8136
Observed ORCID: 0000-0002-1016-8136
OpenAlex ID: A5066545997
Research challenges, quality control and monitoring strategy for Wire Arc Additive Manufacturing
2023 · Mohd Rozaimi Zahidin, Farazila Yusof, et al. · Journal of Materials Research and Technology · 130
Integrated approach to Wire Arc Additive Manufacturing (WAAM) optimization: Harnessing the synergy of process parameters and deposition strategies
2024 · Muhammad Safwan Mohd Mansor, Sufian Raja, et al. · Journal of Materials Research and Technology · 102
A comparative study of the tribocorrosion behaviour of low temperature nitrided austenitic and duplex stainless steels in NaCl solution
2020 · E. Haruman, Y. Sun, et al. · Tribology International · 49
Analysis of material property models on WAAM distortion using nonlinear numerical computation and experimental verification with P-GMAW
2021 · Yupiter H. P. Manurung, Keval P. Prajadhiana, et al. · Archives of Civil and Mechanical Engineering · 39
Experimental validation of numerical simulation on deformation behaviour induced by wire arc additive manufacturing with feedstock SS316L on substrate S235
2021 · Siti Nursyahirah Ahmad, Yupiter HP Manurung, et al. · The International Journal of Advanced Manufacturing Technology · 33
A focused review on numerical computation in wire arc additive manufacturing for high strength low alloy steels: past insights and potential opportunities
2025 · Sarah Nadiah Mohd Ghazali, Mohd Halim Irwan Ibrahim, et al. · The International Journal of Advanced Manufacturing Technology · 19
PDF
Distortion Analysis Method for Wire Arc Additive Manufacturing Component Using Thermomechanical Computation with Enhanced Separation and Deposition Algorithm
2023 · Keval P. Prajadhiana, Thoufeili Taufek, et al. · 3D Printing and Additive Manufacturing · 19
PDF
Distortion analysis of WAAM component using thermo-mechanical, inherent strain and experimental methods
2025 · Keval Priapratama Prajadhiana, Yupiter H. P. Manurung, et al. · Progress in Additive Manufacturing · 16
Experimental verification of computational and sensitivity analysis on substrate deformation and plastic strain induced by hollow thin-walled WAAM structure
2021 · Keval P. Prajadhiana, Yupiter H.P. Manurung, et al. · Rapid Prototyping Journal · 16
Aerodynamics of ARTeC's PEC 2011 EMo-C Car
2012 · Rizal E.M. Nasir, Firdaus Mohamad, et al. · Procedia Engineering · 15
PDF
Structural Development of Expanded Austenite on Duplex Stainless Steel by Low Temperature Thermochemical Nitriding Process
2012 · L.H. Paijan, M.N. Berhan, et al. · Advanced materials research · 13
Modeling and Simulation of Additively Manufactured Cylindrical Component Using Combined Thermomechanical and Inherent Strain Method with Nelder–Mead Optimization
2022 · Thoufeili Taufek, Yupiter H.P. Manurung, et al. · 3D Printing and Additive Manufacturing · 11
PDF
Responses of hybrid S phase layer to nanoscratching
2022 · Firdaus Azmi, Animesh K. Basak, et al. · Surface and Coatings Technology · 10
Tool wear investigation in drilling titanium alloy
2019 · Ikhsan Siregar, J.B. Saedon, et al. · IOP Conference Series Materials Science and Engineering · 10
PDF
Experimental Analysis on Grain Growth Kinetics of SS316L Austenitic Stainless Steel
2021 · Muhd Faiz Mat, Yupiter H. P. Manurung, et al. · Journal of Mechanical Engineering · 9
PDF
Optimizing novel multi-scaled simulation method for deviation analysis of generatively designed aileron bracket using laser powder bed fusion
2024 · Yupiter H. P. Manurung, Thoufeili Taufek, et al. · The International Journal of Advanced Manufacturing Technology · 8
Traffic Flow Prediction in Urban Area Using Inverse Approach of Chaos Theory
2021 · Nur Hamiza Adenan, Nor Suriya Abd Karim, et al. · Civil Engineering and Architecture · 8
PDF
Chained simulation of the welding-forming process in analysing press force and geometrical deformation using non-linear numerical computation with experimental validation
2023 · Mohd Shahriman Adenan, Keval P. Prajadhiana, et al. · The International Journal of Advanced Manufacturing Technology · 6
Experimental Verification of Numerical Computation with Evolved Material Property Model and Sensitivity Analysis on WAAM Distortion using P-GMAW
2021 · Keval P. Prajadhiana, Yupiter H. P. Manurung, et al. · Arabian Journal for Science and Engineering · 6
Milling Performance of Selective Laser Melted Ti6Al4V: A Taguchi Approach for Surface Roughness Optimization
2025 · Ikhsan Siregar, Juri Saedon, et al. · MANUFACTURING TECHNOLOGY · 5
PDF
Distortion analysis of generatively designed hinge bracket using meso-scaled thermomechanical simulation with experimental validation
2022 · Thoufeili Taufek, Yupiter H. P. Manurung, et al. · Virtual and Physical Prototyping · 5
An Investigation on the Surface Integrity of Grade 5 Titanium Alloy Proceeding the Wire Electro-Discharge Machining (WEDM) Process
2020 · Nornisaadila Musa, Juri B. Saedon, et al. · Applied Mechanics and Materials · 5
Investigation on Welded T-Joint Distortion Using Virtual Manufacturing Tools with Simplified Procedure
2020 · Keval Priapratama Prajadhiana, Yupiter HP Manurung, et al. · Journal of the Korean Society for Precision Engineering · 5
Temperature distribution in friction stir spot welding of aluminium alloy based on finite element analysis
2020 · Armansyah, Ho Hwi Chie, et al. · IOP Conference Series Earth and Environmental Science · 5
PDF
Novel Design of Impact Attenuator for an 'Eco Challenge' Car
2012 · Amir Radzi Ab Ghani, Ramlan Kasiran, et al. · Applied Mechanics and Materials · 5
Works count: 91
Citation count: 613
H-index: 11
I10-index: 14
Year
Topic
Type