Get started
Author

Volkan Kovan

Observed names: V Kovan, V. Kovan, VOLKAN KOVAN
Institution: Akdeniz University
ORCID: 0000-0002-0599-525X
Observed ORCID: 0000-0002-0599-525X
OpenAlex ID: A5066651352
Effect of layer thickness and print orientation on strength of 3D printed and adhesively bonded single lap joints
2017 · Volkan Kovan, Gurkan Altan, et al. · Journal of Mechanical Science and Technology · 124
Impact properties of 3D-printed engineering polymers
2021 · Tugce Tezel, Murat Ozenc, et al. · Materials Today Communications · 57
Friction stir welding of AISI 304 austenitic stainless steel
2007 · C. Meran, V. Kovan, et al. · Materialwissenschaft und Werkstofftechnik · 55
Determination of optimum production parameters for 3D printers based on nozzle diameter
2021 · Tugce Tezel, Volkan Kovan · Rapid Prototyping Journal · 52
Investigation of 3D printed Savonius rotor performance
2016 · Burcin Deda Altan, Gurkan Altan, et al. · Renewable Energy · 49
Effects of the printing parameters on short‐term creep behaviors of three‐dimensional printed polymers
2019 · Tugce Tezel, Volkan Kovan, et al. · Journal of Applied Polymer Science · 48
Pitting failure of truck spiral bevel gear
2006 · Tezcan Sekercioglu, Volkan Kovan · Engineering Failure Analysis · 30
Characterising the wear behaviour of DMLS-manufactured gears under certain operating conditions
2019 · Tugce Tezel, Eyup Sabri Topal, et al. · Wear · 29
Failure analysis of 3D-printed steel gears
2020 · Tugce Tezel, Eyup Sabri Topal, et al. · Engineering Failure Analysis · 28
Separation frequency analysis of interference fitted hollow shaft–hub connections by finite element method
2011 · Volkan Kovan · Advances in Engineering Software · 22
Printing Parameters Effect on Surface Characteristics of 3d Printed Pla Materials
2018 · Volkan Kovan, Tuğçe Tezel, et al. · Machines. Technologies. Materials. · 19
Investigation into impact properties of adhesively bonded 3D printed polymers
2022 · Murat Özenç, Tuğçe Tezel, et al. · International Journal of Adhesion and Adhesives · 16
Microstructures and mechanical properties of friction stir welded dissimilar copper/brass joints
2008 · C. Meran, V. Kovan · Materialwissenschaft und Werkstofftechnik · 15
Three-dimensional printability of bismuth alloys with low melting temperatures
2023 · Mustafa Kemal Gülseren, Volkan Kovan, et al. · Journal of Manufacturing Processes · 13
Designing and Manufacturing of Polymer‐Foam Hybrid Materials Using Fused Deposition Modeling
2019 · Tugce Tezel, Volkan Kovan, et al. · Advanced Engineering Materials · 13
Effect of printing parameters on mechanical properties of 3D printed PLA/carbon fibre composites
2018 · Volkan Kovan, Tuğçe Tezel, et al. · Materials Science. Non-Equilibrium Phase Transformations. · 13
Improving surface and dimensional quality with an additive manufacturing-based hybrid technique
2023 · İsmail Ata Mertkan, Tuğçe Tezel, et al. · The International Journal of Advanced Manufacturing Technology · 12
PDF
Heat treatment effect on fatigue behavior of 3D-printed maraging steels
2021 · Tugce Tezel, Volkan Kovan · Rapid Prototyping Journal · 12
An assessment of impact strength of the mandible
2008 · Volkan Kovan · Journal of Biomechanics · 12
Thermal–mechanical fatigue behaviour and life prediction of oxide dispersion strengthened nickel-based superalloy PM1000
2008 · Volkan Kovan, Joachim Hammer, et al. · Materials Characterization · 11
Flexural behavior of 3D printed honeycomb sandwich structures with waste filler material
2016 · Gürkan Altan, Volkan Kovan · Materials Testing · 10
Torque strength of bolted connections with locked anaerobic adhesive
2008 · T. Sekercioglu, V. Kovan · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · 8
Surface Roughness Effect on the 3d Printed Butt Joints Strength
2015 · V. Kovan, G. Altan, et al. · 6
Operational wear behaviour of 3D-printed lightweight metal gears: EDS and oil analysis comparison
2024 · Tugce Tezel, Ulrich Schultheiss, et al. · Materials Testing · 5
Enhancing mechanical properties of 3D-printed PLA composites via topology optimization and nickel coating
2025 · Tugce Tezel, Volkan Kovan, et al. · Polymer-Plastics Technology and Materials · 3
Works count: 44
Citation count: 675
H-index: 13
I10-index: 21
Year
Topic
Type